Question about Sharp AR-5316 Advanced Digital Imager Copier
Posted by Anonymous on
Heat roller abnormally low
When the temperature does not
reach 155°C within 55 sec after
turning on the power, or when it
falls under 145°C during printing,
or when it falls under 100°C
Posted on Apr 21, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Ar 5516 display H4 error
This means that the fusing unit has a problem. Turn off the copier. Open the small side cover on the right of the fuser unit. You will see the wire connectors leading from the unit and carefully remove them.Open the three screws holding the unit and remove it, check the heater lamp continuity if out replace the lamp. Clean the thermistor and return the unit by reversing the removing process. Now try the code and it will work.
Posted on Mar 30, 2010
SOURCE: Problem for Sharp AR-5320 Black
for AR 5320 just check 1- main corona 2- leveling the developer unit 3- clean cleaning plate,
for H4 just rest the machine as mentioned above, if not plz check fuzing unit -- thermostat
Posted on Aug 22, 2010
Perform the following procedure to enter the simulation mode.
"#" key Interrupt key "C" key Interrupt key
press 14 and start key twice.
copier should restart normaly.
If not, then you have problems with the fuser, contact me to tell you what you have to do next.
Posted on Nov 05, 2010
Testimonial: "thanks a lot it was very helpful"
Tips for a great answer:
Jul 09, 2015 | Sharp Office Equipment & Supplies
Jul 04, 2012 | Sharp AR-5316 Advanced Digital Imager...
Jun 19, 2011 | Sharp AR-5316 Advanced Digital Imager...
Oct 06, 2010 | Sharp Office Equipment & Supplies
Aug 22, 2010 | Sharp AR-5320 Black and White Copier
28 people viewed this question
Usually answered in minutes!