Question about Casio Pathfinder PAG60-1AV Watch

1 Answer

Casio pathfinder battery operated watch keeps blanking out display?

My display keeps blanking out and when I hit a button it comes back on fine and the time is correct? I just changed the battery, could it be a weak battery? Thanks

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    New Friend:

    An expert that has 1 follower.

  • Casio Expert
  • 141 Answers

Your watch is solar powered, so I think it isn't charged lately. At a low charge, the watch goes into saving mode by switching off the display (while keeping the time, date, etc.). To charge the watch leave it in a brightly lit spot for a day or two. That should be enough to make the watch function as normal again.

For more information, you can download the manual of your watch here (direct download link):
Timepieces Watches Manuals CASIO

Posted on Mar 24, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: CASIO PAG-40 Keeps good time but buttons stopped working

open the backside.
probably the light switch contact at the six side of the watch (attached to the steel mainframe) may have contact with the electronic cirquit

Posted on Mar 06, 2008

  • 2 Answers

SOURCE: casio sports watch dial continuously scrolling between modes

Hold down mode (bottom left) for about 5 seconds and it should come good.
Good luck

Posted on Feb 16, 2009

  • 2 Answers

SOURCE: New Casio 3157 watch: compass works for 7 seconds then goes blank

Mine does the same!

Posted on Nov 23, 2009

escapement
  • 2338 Answers

SOURCE: I have a Casio Pathfinder PAG-70 that reads

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all CASIO watch manuals.Rate me, please

Posted on Mar 15, 2010

  • 1 Answer

SOURCE: Casio Pathfinder PAG-50 battery replacement

1
ensure all three of the springs are present
the 2 at the top confirm that the case is closed the on at the bottom sends the sound signal.

2
ensure the metal casing on the back of the movement is not touching the back. and check the movement is correctly seated
_43.jpg

Posted on Nov 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buttons on perimeter of pathfinder not functioning


This watch must be returned to Casio service center for servicing, pressure test and complete tune-up.

Mar 04, 2015 | Casio Sea-Pathfinder SPF40-1V Wrist Watch

1 Answer

My Casio Pathfinder 3070 (B) suddenly went blank and all I see now is a tiny "C" flashing. I put my watch under a light source for several hours but still the same. Can someone help me?


The flashing C indicates the battery level is at 4. (1 is the ideal, and 5 is dead) The manual says that it could take 46 hours under fluorescent light to charge to the next fully functional level. 1-5 hours in varying degrees of sunlight.
My watch was blank and flashing C this morning, but has come back with no help from me, except for random button pushing.

Mar 02, 2013 | Watches

1 Answer

How di i change the batteries in my Casio Pathfinder 2782


  • Choose a quiet, well-lit room where you can replace the battery in your Casio Pathfinder watch. Prepare a table, desk or other clean, flat surface where you can perform your watch repair. Put down a soft cloth or piece of craft felt to protect the face of your Casio Pathfinder watch from being scratched during the battery installation process.

  • 2

    Set your Casio Pathfinder watch face-down on the soft cloth or craft felt. Use an optical-sized Philips screwdriver to remove the four screws that secure the watch back to the body of the watch. Set the screws aside, but don't lift the watch back.

  • 3

    Slide the watch back off of the body of the watch very slowly. There are three important springs held underneath the watch back; it is essential to remove the watch back slowly to avoid losing them.

  • 4

    Lift the three springs out of your Casio Pathfinder watch using a small pair of metal tweezers. Take note of the length and placement of the springs as you remove them. Set the springs aside with the other disassembled watch components.

  • 5

    Take the black rubber protective disk out of your Casio Pathfinder to reveal an identically-shaped white plastic disk. Remove the white plastic disk and set it and the black rubber disk aside. Use your metal tweezers, if necessary, to lift out the rubber and plastic disks.

  • 6

    Release the battery strap that holds the battery in place in your Casio Pathfinder watch by pushing the battery strap latch to the left. Remove the old battery from your Casio Pathfinder using a pair of small plastic tweezers.

  • 7

    Pick up your replacement watch battery with the small plastic tweezers and insert it into the battery compartment of your Casio Pathfinder watch. Replace the battery strap and push it gently with the tip of your plastic tweezers to snap the latch in place.

  • 8

    Touch the "-" and "AC" terminals on your Casio Pathfinder watch with the tips of your metal tweezers for at least two seconds. This helps ensure that your watch will work properly once reassembled.

  • 9

    Put your Casio Pathfinder back together to complete the new battery installation. Start by replacing the white plastic disk, followed by the protective black rubber disk. Use your small metal tweezers to replace the small watch springs in their correct locations. Replace the back cover of your Casio Pathfinder, insert the four screws and tighten them with your optical-sized Philips screwdriver.


  • Best regards. Jewel

    Sep 20, 2010 | Casio PRG-40T-7 Pathfinder

    2 Answers

    How do I replace the batteries on my Casio Pathfinder PAG40B-2V watch?


    Thank you for contacting FixYa.
  • Choose a quiet, well-lit room where you can replace the battery in your Casio Pathfinder watch. Prepare a table, desk or other clean, flat surface where you can perform your watch repair. Put down a soft cloth or piece of craft felt to protect the face of your Casio Pathfinder watch from being scratched during the battery installation process.

  • 2

    Set your Casio Pathfinder watch face-down on the soft cloth or craft felt. Use an optical-sized Philips screwdriver to remove the four screws that secure the watch back to the body of the watch. Set the screws aside, but don't lift the watch back.

  • 3

    Slide the watch back off of the body of the watch very slowly. There are three important springs held underneath the watch back; it is essential to remove the watch back slowly to avoid losing them.

  • 4

    Lift the three springs out of your Casio Pathfinder watch using a small pair of metal tweezers. Take note of the length and placement of the springs as you remove them. Set the springs aside with the other disassembled watch components.

  • 5

    Take the black rubber protective disk out of your Casio Pathfinder to reveal an identically-shaped white plastic disk. Remove the white plastic disk and set it and the black rubber disk aside. Use your metal tweezers, if necessary, to lift out the rubber and plastic disks.

  • 6

    Release the battery strap that holds the battery in place in your Casio Pathfinder watch by pushing the battery strap latch to the left. Remove the old battery from your Casio Pathfinder using a pair of small plastic tweezers.

  • 7

    Pick up your replacement watch battery with the small plastic tweezers and insert it into the battery compartment of your Casio Pathfinder watch. Replace the battery strap and push it gently with the tip of your plastic tweezers to snap the latch in place.

  • 8

    Touch the "-" and "AC" terminals on your Casio Pathfinder watch with the tips of your metal tweezers for at least two seconds. This helps ensure that your watch will work properly once reassembled.

  • 9

    Put your Casio Pathfinder back together to complete the new battery installation. Start by replacing the white plastic disk, followed by the protective black rubber disk. Use your small metal tweezers to replace the small watch springs in their correct locations. Replace the back cover of your Casio Pathfinder, insert the four screws and tighten them with your optical-sized Philips screwdriver.


  • Best regards. Jewel

    Sep 19, 2010 | Casio Pathfinder PAG40B-2V wristwatch

    1 Answer

    Casio Pathfinder PAG-50 battery replacement


    1
    ensure all three of the springs are present
    the 2 at the top confirm that the case is closed the on at the bottom sends the sound signal.

    2
    ensure the metal casing on the back of the movement is not touching the back. and check the movement is correctly seated
    _43.jpg

    Mar 28, 2009 | Casio Watches

    1 Answer

    Changed dead batteries on PAG-40. Still one dead watch


    There is a very small sticker with very small red print just adjacent to the battery compartment. This little sticker states "once batteries are replaced, you need to touch AC with tweezers". I did it with metal tweezers and the watch display came to life. Good luck!

    Jan 15, 2009 | Casio PRG-40T-7 Pathfinder

    1 Answer

    Casio sports watch dial continuously scrolling between modes


    Hold down mode (bottom left) for about 5 seconds and it should come good.
    Good luck

    Nov 13, 2008 | Casio Sea-Pathfinder SPF40-1V Wrist Watch

    8 Answers

    CASIO PAG-40 Keeps good time but buttons stopped working


    open the backside.
    probably the light switch contact at the six side of the watch (attached to the steel mainframe) may have contact with the electronic cirquit

    Jan 13, 2008 | Casio PRG-40T-7 Pathfinder

    2 Answers

    Casio spf 40 Module 2273


    Your Watch is in Auto or demo mode. Hold down the "Mode" button for 3 - 5 seconds and it will return to time keeping mode.

    Cheers,
    Murray

    Nov 19, 2007 | Casio PRG-40T-7 Pathfinder

    Not finding what you are looking for?
    Casio Pathfinder PAG60-1AV Watch Logo

    168 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Casio Watches Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18429 Answers

    Arturs Kalnins
    Arturs Kalnins

    Level 3 Expert

    2338 Answers

    Ekse

    Level 3 Expert

    13434 Answers

    Are you a Casio Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...