Question about Konica Minolta bizhub C250 All-In-One Laser Printer

1 Answer

How to reset fusing unit for c250 - Konica Minolta bizhub C250 All-In-One Laser Printer

Posted by Anonymous on

  • himacc
    himacc Jun 14, 2018

    SOLVED

    Change Fuse.: fuse is on the front left side((behind a plastic plate), change for 63mA and it will reset. Is for Konica Minolta Bizhub Fuser and Transfer belt reset fuse's for C200 C203 C253 C353 C250 C252 C300 C352 C350 C351 C450 C451 C550 C650 C452 C552 C652 will save $ 250,=
    https://www.amazon.co.uk/Konica-Minolta-...

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Konica Minolta Master
  • 6,850 Answers

Turn OFF the Main Power Switch.

2. Turn Main Power Switch ON while pressing the Utility/Counter key. (Sub power must be "on" located on side of the control panel)

3. Touch [Trouble Reset].

4. Check to make sure that [OK] is displayed and the it has been reset.

5. After turning off the Main Power Switch, turn it on again more than 10 seconds after




Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Posted on May 30, 2015

  • himacc
    himacc Jun 14, 2018

    change Fuse. : fuse is on the front left side, change for 63mA and it will reset. Is for Konica Minolta Bizhub Fuser and Transfer belt reset fuse's for C200 C203 C253 C353 C250 C252 C300 C352 C350 C351 C450 C451 C550 C650 C452 C552 C652 will save $ 250,=https://www.amazon.co.uk/Konica-Minolta-...

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 214 Answers

SOURCE: request

if fusing unit life is over you must change it. other spearparts you can order from konicaminolta service.

Posted on May 11, 2008

  • 2 Answers

SOURCE: Can i reset my Konica Minolta C250 transfer unit

On your transfer unit there is a .80 amp fuse you can replace. this will reset your belt. make sure you use .80 amp or it will not work. on your fuser there is an inline 1/16 amp fuse next to the plug you can replace for that.

Posted on Oct 01, 2009

wheatlandsvc
  • 1110 Answers

SOURCE: I have a konica Minolta bizhub C250 and the screen

I can only tell you they are definately resettable as I do it all the time.
The fuser "fuse" is located in the connector wiring. Once you get the fuser out just look in the area where the large connector is. It is a very small fuse similar to a resistor, green, and is encased in shrink wrap.
The Transfer belt fuse is behind a small black cover. If you pull the transfer belt unit out of the machine about 6 inches, it is located on the front right corner. In other words standing in front of the copier with the belt unit partially out it is on the corner closest to you. You have to remove a screw, a c-clip, a small metal plate and the small black cover is held on with a very small phillips screw.
He is the parts availablitity and part number info.
Fuses are available at http://www.digikey.com/
Transfer Belts
Replace glass fuse 80ma , counter resets automatically.
Item # 507-1218-ND
Fuser Units
Fuse is wrapped in shrink wrap. Cut it out and splice in a 1/16 ma fuse.
Item # F2307-ND
Good Luck and Thank You for using Fixya.

Posted on Oct 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Konica Minolta bizhub C250 says replace transfer unit. I have looked for this part and can find nothing listed as a Transfer Unit. There are many parts listed but none specifically says Transfer Unit....


I am sending you this link because A) they have all the parts listed including part numbers and pictures. They are also a good source for parts and supplies. You might find one cheaper on the net tho. Also keep in mind that these transfer belt units are resettable by replacing a $5 fuse in the unit. If you have a local independant repair guy, maybe he can research this and reset your existing unit as they will usually go at least 2 cycles. I reset a dozen or more of these units per year for my customers.
http://www.precisionroller.com/search.php?q=minolta+c250+transfer+
Thank You for using Fixya.
WheatlandServices

Jan 25, 2011 | Konica Minolta bizhub C250 All-In-One...

1 Answer

I have bizhub c250 and the 83000 prints (copies). My Fuser unit show empty and I can't use my bizhub c250. it should be replaced on 120 000 copies. How to reset this fuser unit on my printer?


You can reset the fuser counter only by replacing the counter reset fuse. This fuse is located on the fusing unit which must be removed and a small cover opened to get access to the fuse. You ca get the fuses from precisionroller.com
Their part number is M9970. It will say imaging unit fuse but the fuse is the same for the C250 fuser reset.
If you do not feel that you can remove the fusing unit and replace the fuse then you might be able to find a local independant copier repair person to do it.
Be assured tho that you can reset this indicator as I have done this a dozen times or more for my customers.
Good Luck and Thank You for using Fixya.

Nov 04, 2010 | Office Equipment & Supplies

2 Answers

I have a konica Minolta bizhub C250 and the screen is reading "replace transfer unit" and "replace fusing unit". I contacted a local repair guy that said he might be able to reset the counters and the...


I can only tell you they are definately resettable as I do it all the time.
The fuser "fuse" is located in the connector wiring. Once you get the fuser out just look in the area where the large connector is. It is a very small fuse similar to a resistor, green, and is encased in shrink wrap.
The Transfer belt fuse is behind a small black cover. If you pull the transfer belt unit out of the machine about 6 inches, it is located on the front right corner. In other words standing in front of the copier with the belt unit partially out it is on the corner closest to you. You have to remove a screw, a c-clip, a small metal plate and the small black cover is held on with a very small phillips screw.
He is the parts availablitity and part number info.
Fuses are available at http://www.digikey.com/
Transfer Belts
Replace glass fuse 80ma , counter resets automatically.
Item # 507-1218-ND
Fuser Units
Fuse is wrapped in shrink wrap. Cut it out and splice in a 1/16 ma fuse.
Item # F2307-ND
Good Luck and Thank You for using Fixya.

Oct 08, 2010 | Konica Minolta bizhub C250 All-In-One...

1 Answer

How to reset the transfer unit (fuse?), do you


76e2129.jpg
Hope this helps. Make sure you remove the waste tank prior to taking out the transfer belt. Belt is removed by two screws inside right door and sliding the unit out.

May 15, 2010 | Konica Minolta bizhub C250 All-In-One...

2 Answers

How to reset the transfer unit (fuse?), do you


search in youtube you will get there, what you want,

Mar 29, 2010 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Can i reset my Konica Minolta C250 transfer unit and fusing unit?? Is there a chip reset that I can buy for the transfer unit and fusing unit? I just purchsed the resets for the image units and they worked...


On your transfer unit there is a .80 amp fuse you can replace. this will reset your belt. make sure you use .80 amp or it will not work. on your fuser there is an inline 1/16 amp fuse next to the plug you can replace for that.

Sep 30, 2009 | Konica Minolta bizhub C250 All-In-One...

2 Answers

How do you reset the life of the transfer unit on the Bizhub C250


Yes,

Remove Trasfert belt unit.

On the left handled remove one screw ( spring fixer) and remove right srew (over the belt / bar whit finger fixee).

Remove, on the left spring stoppage and metal handled.

Remove black little srew and take to hand fuse contact.

Change fuse (behind) with new identical fuse and reassembly.

It may be reset trasfert belt counter.

Sorry for my not good english.

Bye.

Feb 14, 2009 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Request


if fusing unit life is over you must change it. other spearparts you can order from konicaminolta service.

May 05, 2008 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

812 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...