Question about Sharp AR-5316 Advanced Digital Imager Copier

Open Question

Sharp AR-5127 copier key operator programe - Sharp AR-5316 Advanced Digital Imager Copier

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
mickspaceNET
  • 115 Answers

SOURCE: Lost key operator code for Sharp Copier AR-M207.

The default is 00000

Simulation 22 - 07 will display the Key operator code.

Perform the following procedure to enter the simulation mode.
"#" key -> “*“ (star) key -> "C" key -> “*“ (star) key (do this in quick sequence order, the display should change, then enter below)

Main code {22} ->
(Green Copy Button) Start key ->
Sub code {07} ->
(Green Copy Button)Start key

Press the "CA" button to go back to Copy mode.

Posted on Feb 06, 2009

Ad
  • 37 Answers

SOURCE: AR-5127 Counter Reset

Try these steps

1.Press continously #key then Interrupt key then CA key then # key


2.If the display turns off it means that you are inside the simulation but if not do again step 1.


3.Press 81 then press enter then press 1 then enter


Hope that this will help to reset .

Posted on Mar 03, 2009

M2Tech1
  • 313 Answers

SOURCE: ERROR CODE U2-40: SHARP AR 5127

ERROR CODE U2-4 COULD BE RELATED TO THE MEMORY BATTERY BEING DEAD ON TEH MAIN BOSRD IF IT IS AN OLD MACHINE SO YOU COULD CHECK THSI OR REPLACE AND TRY WITH NEW

Posted on Jun 12, 2009

  • 118 Answers

SOURCE: U2-40 error on Sharp AR 5127 copier

try this pres the ff: # >interrupt> C >Interrupt
input 16 then follow instruction

this is related when you install not original toner or not compatible one

Posted on Jul 21, 2009

  • 268 Answers

SOURCE: Solution for SHARP AR 5127 error U2-40 call for service

This means that the cartridge's sensor is miscommunicating with the copier memory thus the code U2 -40. You should clean the inner sensor connector and the toner sensor of the spilled toner by low blower. Perform this code ;# , interrupt , C, Interrupt keys in that order and press 16 then Print key and the code will be cleared.

Posted on Feb 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Transaction Report that includes portion of the fax in AR-5127, not only in error - is it possible?


In fax mode, touch the [SPECIAL MODES]
key.

Touch the [TRANSACTION REPORT] key.

If you want the transaction report to print regardless
of whether the transmission succeeds or fails, touch
the [ALWAYS PRINT] key.

Touch [PRINT ORIGINAL IMAGE] checkbox

Touch the outer [OK] key.

Oct 20, 2010 | Sharp AR-M237 Copier

3 Answers

Solution for SHARP AR 5127 error U2-40 call for service


This means that the cartridge's sensor is miscommunicating with the copier memory thus the code U2 -40. You should clean the inner sensor connector and the toner sensor of the spilled toner by low blower. Perform this code ;# , interrupt , C, Interrupt keys in that order and press 16 then Print key and the code will be cleared.

Feb 02, 2010 | Sharp AR-5316 Advanced Digital Imager...

3 Answers

ERROR CODE U2-40: SHARP AR 5127


ERROR CODE U2-4 COULD BE RELATED TO THE MEMORY BATTERY BEING DEAD ON TEH MAIN BOSRD IF IT IS AN OLD MACHINE SO YOU COULD CHECK THSI OR REPLACE AND TRY WITH NEW

Jun 12, 2009 | Sharp AR-5316 Advanced Digital Imager...

4 Answers

Sharp AR-5127 H2-00 code reset


Sharp Fuser
H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14. Push P * C * then 14 then Start (the button you use to make copies) and it should reset the code. If not then replace the fuser.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.

Feb 01, 2009 | Office Equipment & Supplies

3 Answers

Error code sharp 5127


go to percision roller in phx arizona you can get all sharp service manuels i have alos seen them on ebay?

Jan 28, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

AR-5127 Counter Reset


Try these steps

1.Press continously #key then Interrupt key then CA key then # key


2.If the display turns off it means that you are inside the simulation but if not do again step 1.


3.Press 81 then press enter then press 1 then enter


Hope that this will help to reset .

Dec 02, 2008 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Sharp AR-5127, the error code U2-40


U2-40 is a board error, F1-15 is finisher lift motor error.

To reset: #, interrupt, clear, interrupt. (screen should say service mode), enter 16, print, are you sure? , yes.

For the finisher error, follow above procudure, entering 14 instead of 16. if error returns, disconnect the finisher

Nov 26, 2008 | Office Equipment & Supplies

7 Answers

Sharp AR-5127, the error code U2-40


SOLUTION: ERROR MESSAGE U2-40, SHARP COPIER AR-5127
PRESS #
PRESS =
PRESS C
PRESS =
TYPE 16
PRESS ENTER BUTTON (the button for making photocopy)
PRESS 'OK' TWICE
Note: be fast in pressing all the buttons.
FROM EKPA ONU - (+2348055790979, NIGERIA,LAGOS)

Apr 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...