Question about Sharp AR-5316 Advanced Digital Imager Copier
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Sorry bubbabear 64, you are wrong you need to reset the copier with sim 14, once you have cleared the jam, there is no sensor in the fuser so often if the paper gets crumpled in there is doesnt trigger and sensors so the customer trys to copy again and again, seen it many times.
John Sharp Tech
Posted on Jul 22, 2008
First you need to know the key operator code, you can display it by pressing [C][INTERUPT] [0/ZERO][INTERUPT][START][START] then the display will shows you the 5 digits key operator. After you know the key operator code, you can go to User program, this is done by pressing [C][INTERUPT] [C] then input the key operator code, when entry is complete "P" will appear in the quantity display. Input 19 then START, input the new code and press START. To exit user program press CA
Posted on Jun 05, 2009
Try this. On the panel. Press # * C *. Your screen will change to a diagnostic mode.
Enter the number 14 , as if you were going to make 14 copies.
You may have to enter 1 , then press start. But follow the display directions.
The 14 will clear F codes. This should resolve your problem.
Posted on Feb 22, 2011
Tips for a great answer:
Apr 11, 2017 | Sharp Office Equipment & Supplies
May 20, 2014 | Sharp AR-5320 Black and White Copier
Nov 14, 2011 | Office Equipment & Supplies
Mar 30, 2011 | Sharp AR-5320 Black and White Copier
Feb 17, 2011 | Sharp AR-160 Copier
24 people viewed this question
Usually answered in minutes!