Question about Samsung WF337AA Front Load Washer

1 Answer

What is an F3 26 error?

Quick test mode returned an F3 26 error that is not even remotely listed in the manual or online codes, any advice?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Appliance tech has a computer program or hand held device that has the answer. Newer machines are built to that spec. F3 shows where the main component of the error exists. #26 may not be a commonly occurring error. Go to Google and type in F3-26 or something similar. See what happens. Failing that contact a repair Company or your trusted Tech.

Posted on Jun 29, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing TV, model CKT2521. Classic number CH- 10C. Where can I get a replacement remote control?


You should verify in the user's manual of the remote you mean to buy if your TV brand is listed. Bad new is thart models are not listed.
Your TV may appear with several codes
You should feed the code according to the instructions and test the remote.
It is possible that none of thse codes will work; then your only rsourse might be to scan your remote according to provided procedure, until you get some response from the TV.
In worst case, if no code works, you should return the remote to the shop where you bought it and find another one, so maybe buying that remote from some online webstore might not be the best solution

Oct 31, 2015 | Televison & Video

1 Answer

I do not have the original remote and my tv is flashing red,black, blue and white, how do I return it to normal mode.


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" view, will make surf easier.
http://electrohelponline.blogspot.com/

Apr 02, 2014 | Emerson LD190EM1 19 in. LCD TV/DVD Combo

1 Answer

Tvonics Z250 remote broken


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://homenol.blogspot.com/
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Dec 23, 2017 | TVonics DTRZ250

1 Answer

I found a small part (looks like the top part of a pen) in my washer, now when i turn on the washer the goes in but does not stop, does not start the wash cycle. Also door keeps locking and unlocking.


How to run a diagnostic test:
  1. Unplug power cord, then wait 30 seconds.
  2. After plugging in, follow these instructions...
To Enter SERVICE MODE: Press Signal-Delay-5ignal-Delay (within 30 seconds of plugging in washer).
To Exit SERVICE MODE: Repeat Signal-Delay-Signal-Delay.

Here are the possible tests to run (TEST LIST). The error codes from t02 will probably be the best indicator of your problem. (scroll down to bottom to see what each command button does once you are in test mode)
  • "t01"
    Model ID
    Verifies (or sets on new board) the proper Model id
  • "t02"
    Error Codes
    Lists up to 10 control-detected problems
  • "t03"
    Software ID
    Verifies using latest Control-eePROM-lnverter software
  • "t04"
    Exercise lCD/lEDs
    Verifies that all the displays and buttons work
  • "tOS"
    Pump Test
    Tests drain-out pump
  • "t06"
    Pressure Switch Test
    Fills to all 3 levels, then pumps out water
  • "tOT'
    ThermistorlHeater Test
    Verifies that both the Thermistor and Heater work
  • "t10"
    Tumble Test
    Verifies Washer Tumbles (I.e. Wash cycle)
  • "t11"
    Spin Test
    Verifies Washer spins
  • "t12"
    Dispenser Test
    Verifies Dispenser fill works-for all four fill modes
  • "t13"
    EOl Test
    Performs End-of-Line test sequence

Button Commands (based upon test mode)
-----------------------------------------------------------------
t01 prerequisites: none

Start Displays defined Model id (01-04); displays "---" if new board (to set Model id, rotate knob unlil desired id [01-04] displayed, press and hold "START' key to program desired model)
Power Returns to "t01"
------------------------------------------------------------------
t02 prerequisites: none

Start Displays most recent error code (EOO=none)
Start Displays previous error code (up to previous 10)
Hold start Clear all error codes (and then displays EOO)
Power Returns to "102"
------------------------------------------------------------------
t03 prerequisites: none

Start Alternate "cod" and Control Software version
Start Alternate "EE" and eePROM version
Start Alternale "Inv" and Inverter Software version
Power Returns to "103"
------------------------------------------------------------------
t04 prerequisites: none

Start loops on lighting lED's, LCD and cycle ids
Any button Beeps when depressed
Power Returns to "t04"
------------------------------------------------------------------
tOS prerequisites: none

Start Displays "P" and pump for 60 seconds
Power Returns to "t05"
------------------------------------------------------------------
t06 prerequisites: none

Start Displays "E" (for Empty) and starts filling when reaches Foam level-displays "F"
Start Fill, when reaches Main level-displays "nl"
Start Fill, when reaches overflow leve~ displays "OF," pumps out, displays "E" when tub empty
Power Returns to "t06"
------------------------------------------------------------------
t07 prerequisites: Main level pressure switch must work

Start Displays temperature in OF, fills to main level, turns on heater up to 5 minutes, displaying rising temperature
Power Pumps out water and returns to ''t07''
------------------------------------------------------------------
t10 prerequisites: none

Start Displays "It" and tumbles tub alternating the direction every 5 seconds
Power Stops tumbling and returns to "t10"
------------------------------------------------------------------
t11 prerequisites: none

Start Spins to 400 RPM displaying increasing RPM
Start Spins to 1100 RPM [Greater than or equal to 1000, displays "Axx"; Greater than or equal to 1100, displays "bxx" (xx, 0 to 99)] [currently error-automatically goes to 0 RPM]
Power Stops spinning and returns to "t11" when stops
------------------------------------------------------------------
t12 prerequisites: none

Start Displays "pdt" and fills via pre-wash chamber
Start Displays "ddt" and fills via main wash chamber
Start Displays "bdl" and fills via bleach chamber
Start Displays "Fdt" and fills via fabric softener chamber (stops if reaches Main level during any fill)
Power Pumps out water and returns to "t12"
------------------------------------------------------------------
t13 prerequisites: none

Start Starts EOl test sequence (NOT used in Repair)
Power Returns to ''t13''

Once you have the diagnostic codes, check this post for the meaning of the codes:

http://www.fixya.com/support/t9556917-ge_model_wcvh6800j_error_code_04

Jun 25, 2011 | General Electric WCVH6800J Front Load...

1 Answer

What does F-76 code mean on a Noritz M-069 panel


F76 is a communication error. It usually occurs if you connect or disconnect a quick connect cable or remote control when the tankless heater is connected to electricity. (If you have a quick connect system, make sure you only have 1 remote and 1 quick connect cable.) To get rid of the code, try disconnecting electricity for 20 seconds, reconnecting electricity, and turning the remote on. If the code returns, you may need to replace your quick connect cable, remote cable, or even remote control

Sep 14, 2010 | Noritz 6.9 Gallon Residential Tankless...

2 Answers

Canon mp190 error e5, with refilled cartridge will not reset, even though the error only came on after the printer had already worked with the newly refilled cartridges. Ive tried the reset/power button...


Hi. Try to reset the printer using the procedure below.

Manual Reset for Canon Pixma MPC190 Printers
  1. Enter the service mode SERVICE MODE – pressing buttons Menu, Copy, Scan, Copy, Copy
  2. Choose TEST MODE.
  3. Select 8 PRINTER TEST TEST MODE.
  4. Choose 3, EEPROM CLEAR
  5. Select 0, INK COUNT
  6. Press the Set button.
  7. Click Stop / Reset button (return to item 3), and again press the ON / OFF

Aug 21, 2010 | Computers & Internet

1 Answer

I have the code but only says on screen that it is waiting? on my kenwood kdc 6090r


• Security-related information

1. Forced Power ON mode (All models)

Even when the security (Mask key) is approved, resetting

the unit while holding the ATT and Preset 4 keys makes it

possible to turn the power ON for 30 minutes. After 30

minutes have elapsed, it is not possible to return to the

previous condition unless the unit is reset again.

2. Method of registration of the security code after EEPROM

(Tuner Unit ***'y) replacement

(Code security model)

(1) Enter the test mode. (See " 1. How to enter the test

mode")

(2) Press the CLK key to enter the security registration

mode.

(3) Enter the code using the Preset 1/2/3/4 keys.

Example: To enter "3510"

• Press the Preset 1 key 4 times.

• Press the Preset 2 key 6 times.

• Press the Preset 3 key twice.

• Press the Preset 4 key once.

(4) Press and hold the DISP key for 3 seconds until

"APPROVED" is displayed.

(5) Exit from the test mode. (See " 2. How to exit from the

test mode")

(Note) All Clear is not applicable to the security code of

this model.

3. Simplified method of clearing the security code (K Type

only)

(1) While the code entry is requested, press and hold the

VOL UP key for 3 seconds while holding the DISP

key pressed. (This should turn "----" off.)

(2) Enter "KCAR" from the remote. (Same way as the 00

model)

Press the 5 key on the remote twice, then press the

Track Up key. (This enters "K".)

Press the 2 key on the remote 3 times, then press the

Track Up key. (This enters "C".)

Press the 2 key on the remote once, then press the

Track Up key. (This enters "A".)

Press the 7 key on the remote twice, then press the

Track Up key. (This enters "R".)

(3) The security code is cleared and the unit enters the

ALL OFF mode.

(4) If you commit a mistake in the code entry, the unit

enters the code request mode again.

4. Method of writing the Mask key while the EEPROM is in

the initial status

(1) Enter the test mode. (See " 1. How to enter the test

mode")

(2) Press the CLK key to enter the Mask key registration

mode. "TRANSMIT1" should be displayed now. The

display at this time should show " < > " in place of " [ ]

".

(3) Point the Mask key remote toward the light sensor,

and press and hold its key for more than 0.5 second.

(4) When "TRANSMIT2" is displayed, press and hold the

key on the Mask key remote for more than 0.5 second

again. The first and second counter codes are not

compared at this time.

(5) When "APPROVED" is displayed, the write operation

is complete. Now the demonstration mode is initiated

and the test mode is terminated.

(Note) In the same way as previous models, if 30 minutes

have elapsed with no code written, an error occurs

and the power is turned OFF.

5. Method of initializing the Mask key

(How to reset the unit from the Mask key approved condition

to the factory condition)

(1) Enter the test mode. (See " 1. How to enter the test

mode")

(2) "TRANSMIT1" is displayed and the Mask key entry

request mode is initiated.

The display at this time should show " ∗ ∗ " in place of

" [ ] ".

(3) Press and hold the key on the Master key remote for

more than 3 seconds.

(4) When "TRANSMIT2" is displayed, press and hold the

key on the Master key remote for more than 3 seconds

again.

(5) When "APPROVED" is displayed, the Mask key is

cleared, the demonstration mode is initiated, the test

mode is terminated and the unit returns to the factory

condition.

6. Method of clearing all Mask key-related data

(1) Enter the test mode. (See " 1. How to enter the test

mode")

(2) Press the CLK key to enter the Mask key registration

mode. "TRANSMIT1" should be displayed now.

(3) Point the Master key remote toward the light sensor,

and press and hold its key for more than 3 seconds

(until the level display shows the full condition).

(4) When "TRANSMIT2" is displayed, hold the key on the

Mask key remote for more than 3 seconds again.

If "TRANSMIT1" is displayed in place of "TRANSMIT2",

restart the procedure from step (3).

(5) When "APPROVED" is displayed, all security data is

cleared and the unit returns to the condition before
Mask key writing with the EEPROM in the initial status

Apr 05, 2010 | Kenwood KDC-6090R

3 Answers

Uverse remote connection


This process should be used if the code for the device is not listed in the Manufacturer Code List.
  1. Turn on the device you wish to program.
  2. Point the remote control at the device.
  3. Press and hold the Mode key (TV, DVD or AUX) you want to program. Without releasing the selected Mode key, press and hold the OK key simultaneously
  4. Release both the Mode key and the OK key at the same time.
    All the Mode keys will flash twice indicating programming mode.
  5. Enter code 922 by pressing the number keys on the remote control. The selected Mode key will flash twice indicating correct entry.
    Note: This next step is For AUX Searching only, press and release the PLAY key then press:
    • 1 for VCR
    • 2 for Receiver/Tuner
    • 3 for Amplifier
    • 4 for Home Theater In The Box (HTIB)

    All the Mode keys will flash twice indicating correct entry.
  6. For AUX only, press and hold the PLAY key and wait until the device turns off, then release the PLAY key.
    • The REW key can be utilized to go back through the codes one at a time.
    • The FF key can be utilized to move forward through to codes one at a time.
    • Press the PLAY key to resume auto search of device codes.
  7. To save the code, press the ENTER key on the remote control (bottom right) or press the EXIT key to return to normal operation.
    The selected Mode key will flash three times and return to normal operation.
  8. If no valid code is found, the red light will flash two times and the remote control will return to normal operation.
  9. Turn the device back on using the remote control. If this doesn’t work start over or try Manual
  10. Press the appropriate Mode key on the remote control to work with the selected device. To use the remote control for the AT&T U-verse TV Receiver, press the AT&T Mode key.

May 24, 2009 | Durabrand DWT1905 TV

3 Answers

Errors list : 46, 50, A1


CP315C/310CN/120C/115C/117C/110C
(1) Press the (1) Press the
Menu and Mono Start keys. Menu and Mono Start keys. Next press the key four times to make the machine Next press the key four times to make the machine
enter the maintenance mode. enter the maintenance mode.
(2) Enter 8 and 0 by using the and (2) Enter 8 and 0 by using the and
Set keys.* Set keys .*
(*To enter a numerical code on models having no numerical keypad, press the key several times to (* To enter a numerical code on models having no numerical keypad, press the key several times to
display the numerical code to be entered and then press the display the numerical code to be entered and then press the
Set key. Set key. Repeat this operation for each Repeat this operation for each
numerical code.) numerical code.)
(3) Press the (3) Press the
Mono Start key several times until the purge count appears on the LCD. Mono Start key several times until the purge count appears on the LCD.
(4) Enter 2, 7, 8, and 3 by using the and (4) Enter 2, 7, 8, and 3 by using the and
Set keys to reset the purge count to zero.* Set keys to reset the purge count to zero .*
(5) Press the (5) Press the
Stop/Exit key to return to the initial stage of the maintenance mode. Stop / Exit key to return to the initial stage of the maintenance mode.
(6) Enter 9 twice by using the and (6) Enter 9 twice by using the and
Set keys to exit from the maintenance mode.* Set keys to exit from the maintenance mode .*

Mar 01, 2008 | Brother DCP 115C All-In-One InkJet Printer

Not finding what you are looking for?
Samsung WF337AA Front Load Washer Logo

418 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Washing Machines Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Paul

Level 2 Expert

381 Answers

Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...