Question about Zebra 105SL Thermal Label Printer

Open Question

Where is the thermal ribbon on a Zebra ZM400 printer?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Zebra 105 SE Printing Blank Labels

Seagull Scientific has drivers. Their Zebra driver is recommended by many.
http://www.seagullscientific.com/aspx/drvrmain.aspx

That's the link for their printer drivers page. Go to the bottom and click on 'Download a printer driver'. Then scroll the list to find the one you need.

Posted on Jun 10, 2008

Ad
  • 1 Answer

SOURCE: ZM400 printer

Try going through the LCD menu and if it say "Direct Thermal" change it to "Thermal Transfer", Direct Thermal made means, no ribbon required, but it sounds like you do have ribbon in the printer, if so, try my recommendation. If it asks for a password, it's '1234'.

Posted on Apr 24, 2009

seltzercool
  • 21 Answers

SOURCE: my zm400 keeps reverting back to direct thermal

did it stay on direct thermal if you not doing any print job ?
then i assume you the problem is when you printing .In ZEBRA DESIGNER, there's a printing preference that can be set up... i think u selected direct thermal when you print with zebra designer, that's why whenever u start printing, it show RIBBON IN again.
the solution is, Just changed the printing method from zebra designer.

if you aren't using zebra designer, then the problem at your driver. Open Printer & Faxes, then right click your Printer and klik on Printing Preferenced. There u can set up the printing method to Thermal Transfer.

The thing is....... changing the Setting from LCD panel won't change the setting on the driver.

i hope this will help you

Posted on Aug 20, 2009

  • 16 Answers

SOURCE: Error condition ribbon out in ZM400

In the printer setting-

Change the Print Method from - "Tharmal Transfer to Direct Thermal" and save it permanently

Posted on Sep 08, 2009

  • 4 Answers

SOURCE: keep getting broken ribbon message on zebra P330i printer

Hello, assuming the supplies are Zebra and there is no discernible damage to the ribbon, it could mean that the ribbon sensor on the printer is broken. if your printer is still under warranty you can ship back to Zebra (Illinois) to get it repaired. The zebra website has info on how to return printers for service. Hope this helps.

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant perform anything on my printer because when i turn it on it comes with a ribbon and paper out error.what should i do


please check if you fit the paper and ribbon at correct place (under the crome plate and between the printheard and white roller.

Aug 22, 2014 | Zebra ZM400 Thermal Label Printer -...

1 Answer

Black horizontal line on zm400


check the pressure of the printhead.increase the pressure of the printhead.

its a ribbon friction line.

Dec 28, 2013 | Zebra ZM400 Direct Thermal-Thermal...

1 Answer

Hello, I changed the ribbon. The ribbon and labels


can you adjust the printhead pressure?? if so then do that

Aug 22, 2017 | Zebra ZM400 Thermal Label Printer -...

1 Answer

Will not print onto the label. but can see it on the black ribbon reel.


Perhaps your darkness is set too low, or your labels are not coated to accept thermal transfer printing. Let me know if this helps!

Aug 28, 2011 | Zebra ZM400 Thermal Label Printer -...

1 Answer

I cannot print from my mac to a ZM400 Zebra printer


That is correct, you can try VM Windows. I would get a cheap laptop instead, as it is easier. Hope this helps!

Apr 27, 2011 | Zebra ZM400 Direct Thermal-Thermal...

1 Answer

Have A Zebra Z6M Plus 300dpi printer Z6M00-2006-0000, then purchased a Zebra ZM400 300dpi printer, attempting to print using formats from Z6Mplus, result is a print approx 150 % larger ??? Downloaded...


Print configuration from both printers and compare. Print config- Hold cancel button 10 sec. while power on. Check Resolution parameter. 203dpi=8MM Full , 300dpi=12MM Full. Sounds like perhaps they are different dpi.

Apr 03, 2011 | Zebra ZM400 Thermal Label Printer -...

3 Answers

My zm400 keeps reverting back to direct thermal


did it stay on direct thermal if you not doing any print job ?
then i assume you the problem is when you printing .In ZEBRA DESIGNER, there's a printing preference that can be set up... i think u selected direct thermal when you print with zebra designer, that's why whenever u start printing, it show RIBBON IN again.
the solution is, Just changed the printing method from zebra designer.

if you aren't using zebra designer, then the problem at your driver. Open Printer & Faxes, then right click your Printer and klik on Printing Preferenced. There u can set up the printing method to Thermal Transfer.

The thing is....... changing the Setting from LCD panel won't change the setting on the driver.

i hope this will help you

Aug 19, 2009 | Zebra 203DPI Printer

1 Answer

Error condition ribbon out in ZM400


In the printer setting-

Change the Print Method from - "Tharmal Transfer to Direct Thermal" and save it permanently

Aug 10, 2009 | Zebra 105SL Thermal Label Printer

1 Answer

How to load new labels


http://www.scanonline.com/Online-Store/ZM400-600

Download the ZM400/600 Quick Reference Guide on the right hand side of the page. They have a diagram on how to load labels.
There should also be one inside the printer - printed on the back wall...

Jul 10, 2009 | Zebra ZM400 Direct Thermal-Thermal...

3 Answers

ZM400 printer


Try going through the LCD menu and if it say "Direct Thermal" change it to "Thermal Transfer", Direct Thermal made means, no ribbon required, but it sounds like you do have ribbon in the printer, if so, try my recommendation. If it asks for a password, it's '1234'.

Oct 14, 2008 | Zebra 203DPI Printer

Not finding what you are looking for?
Zebra 105SL Thermal Label Printer Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

Gateway information...

Level 2 Expert

252 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...