Question about Timex Ironman Watches

Open Question

What is when it displays a code 814017 time changes

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set time on Casio 550 pro trek. I can't get it to set for daylight savings time.


According to Casio, in the time keeping mode hold the E until each of the following steps occur. hold SET appears in digital display>HT flashes. Second hand points to the current home city code. Set 2: Use A to select the city code you want to select as your home city. Each press of A moves the second hand clockwise. keep pressing A until it lands on the city code you need. Select your home city code before changing any other setting. Step 3: Press D to cycle through the available settings on the digital display. When the time keeping setting you want to change is displayed, you A ad or C to change it. Step 5: Press E to exit the screen, the hands of the watch will move to the time you set. Any other information or diagram is listed on the website Casiowatchparts.com

Mar 13, 2016 | Casio Watches

1 Answer

How to set time on timex 1440 sports watch


Welcome to FixYa!
Here's your request.
TIME AND DATE 1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash. 2. Press ADJUST to set SECONDS to zero. 3. Press START/STOP to select MINUTES. 4. Press ADJUST to change. 5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM. 6. Press MODE when done. 7. To display DATE from Time display , press START/STOP. 8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE. 9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.
ALARM AND HOURLY CHIME 1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash. 2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM. 3. Press START/STOP to select MINUTES. 4. Press ADJUST to change.. Press MODE when done. 5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.
CHRONOGRAPH 1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes. 2. With time displayed, press MODE to select Chrono Mode. 3. Press START/STOP to start. 4. Press ADJUST to view lap time. Press again to sesume lap timing. 5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero. 6. Repeat for successive laps.
Thank you for using FixYa! Have a great day.
Jas247

May 06, 2011 | Timex Watches

1 Answer

Resendly purshased a casio 4772 watch. diplay time and city. trying to get it set for dst. read manual and cant get button (A) to flash. can u help


Hi ...



your watch supports Time Zones , Automatic time Updates, Automatic adjustments of DST.

nightflare_10.jpg







First Verify Correct Home City Is Selected
1. In Time Keeping Mode (That is The Digital Display shows time and Day of week)

nightflare_3.png

2. Press Button (A) long enough to country code start to flash on digital display.nightflare_4.png


3. Press Button (B) or Button (D) to change Country code to current one.
4. After Selecting Desired Country, Press button (A) TWICE.

Now Country Code will be saved on watch.

Supported Country codes are:-

nightflare_7.png


To Activate DST (Daylight Saving Time).
1. In Time Keeping Mode (That is The Digital Display shows time and Day of week)
nightflare_5.png

2. Press Button (A) long enough to Digital Display start to flash.

3. Press Button (C) TWICE to Display DST Settings.
4. Press Button (D) repeatly to cycle through three DST Options:-
A --> DST is set on Automatic Mode. If Your country uses DST, the watch will Adjust DST Accordingly.
OFF --> DST is set to disabled. No DST is applied to Main Time Settings
ON --> DST is Set to On. DST is applied even if your country doesnot follow DST.
5. Press Button (A) TWICE to save Selected Option.


Default values (Factory Settings) when you bought this watch is
nightflare_6.png


This way you can set DST

Mar 13, 2011 | Watches

1 Answer

NEED AQUALITE MANUAL - CAN'T SET TIME


To set time:

1) Press "Mode" button until Time is displayed.
2) Press and hold "Lap/RST" button until seconds display starts flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from seconds>minutes>hours>date>month>day of the week>time format>date format
5) Press "Lap/RST" once you are done to set the time.

To set Alarm time:

1) Press "Mode" button until ALM is displayed.
2) Press and hold "Lap/RST" button until minutes display starts flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from minutes>hours (remember to cycle through for AM or PM
5) Press "Lap/RST" once you are done to set the alarm.

To toggle alarm sounds on and off:

1) Press "Mode" button until ALM is displayed
2) Press "ST./STOP" button to toggle alarm sounds on or off (shown on display)
3) If alarm sound is shown on display, alarm will go off every day at the selected time. To turn off alarm once the alarm sounds, simply press any button on the watch.

Apr 09, 2010 | Watches

2 Answers

NEED THE INSTRUCTIONS FOR AN AQUALITE 100 jstreiter@comcast.net


To set time:

1) Press "Mode" button until Time is displayed.
2) Press and hold "Lap/RST" button until seconds display starts flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from seconds>minutes>hours>date>month>day of the week>time format>date format
5) Press "Lap/RST" once you are done to set the time.

To set Alarm time:

1) Press "Mode" button until ALM is displayed.
2) Press and hold "Lap/RST" button until minutes display starts flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from minutes>hours (remember to cycle through for AM or PM
5) Press "Lap/RST" once you are done to set the alarm.

To toggle alarm sounds on and off:

1) Press "Mode" button until ALM is displayed
2) Press "ST./STOP" button to toggle alarm sounds on or off (shown on display)
3) If alarm sound is shown on display, alarm will go off every day at the selected time. To turn off alarm once the alarm sounds, simply press "ST./STOP" button on the watch.

Mar 26, 2010 | Bulova Watch

1 Answer

How do you set the time?


To set time:

1) Press "Mode" button until Time is displayed.
2) Press and hold "Lap/RST" button until seconds display starts flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from seconds>minutes>hours>date>month>day of the week>time format>date format
5) Press "Lap/RST" once you are done to set the time.

To set Alarm time:

1) Press "Mode" button until ALM is displayed.
2) Press and hold "Lap/RST" button until minutes display starts flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from minutes>hours (remember to cycle through for AM or PM
5) Press "Lap/RST" once you are done to set the alarm.

To toggle alarm sounds on and off:

1) Press "Mode" button until ALM is displayed
2) Press "ST./STOP" button to toggle alarm sounds on or off (shown on display)
3) If alarm sound is shown on display, alarm will go off every day at the selected time. To turn off alarm once the alarm sounds, simply press "ST./STOP" button on the watch.

Jan 13, 2010 | Watches

1 Answer

How can we use the Honeywell alarm LYNXR series without the service if we dont know the installer code. Where would the code be found anyway?Thanks


you have get into programming by disconnecting the power then reapplying it (battery first) within30 seconds press1and 3 ( same time ) until you see 20 flashing. press #20 and the installer code will be displayed one number at a time. If you want to change it press *20and whatever 4 digit code you want the installer code to be. Next Press *99 The system will reset and come out of programming

Oct 22, 2009 | Honeywell 5804 Ademco Wireless Security...

2 Answers

Random display resets of TIMEX Ironman Triathalon(100 lap memory)


Hello RLOWE803,

While I was looking for pictures specific to resetting this watch, I came across your post and thought to reply. I recently replaced the batteries on my watch, which I have owned for nearly 7 years. It is an Ironman Triathlon 100 Lap watch. When I replaced the batteries this time, I forgot to reset, in essence reboot the system, by using a metal needle point tweezers to briefly connect the positive side of the battery to the "AC" pad on the small circuit board for at least 2 seconds. I remembered to do this with at all the other times I had replaced the battery and did not have any troubles after it. This time I forgot and now have the same issue you described. I am not sure where the "AC" pad is on the back of the module. But, it should be apparent if I did it correctly in the past.

Give that a try before sending it off to be repair and wasting time, money and trouble.

Good luck,
CAZ

Jul 22, 2009 | Timex Sports Ironman Triathlon 100-Lap...

2 Answers

Garmin Forerunner 50 Train Display Settings


I was having the same problem and came across your post - I figured out how to change the secondary display.  While in Train mode, with your foot pod activated, hold the View button.  The secondary display will change and say "CAD" or "PACE"...keep doing this until you get to the right display.  Hope this helps!

Jan 15, 2009 | Garmin Forerunner 50

2 Answers

Error Code Display


Mine did the same thing after changing the battery and would reset intermittently without warning. For some unknown reason I decided to open the watch again. This time I reset the time and date with the back off the watch while deprssing the small spring that is there on the inside . Haven't had a problem since. Don't know if this is the solution but it worked for me. Good luck!

Les H.

Oct 30, 2007 | Timex Sports Ironman Triathlon 100-Lap...

Not finding what you are looking for?
Watches Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

pacdave

Level 2 Expert

104 Answers

 Mikey
Mikey

Level 3 Expert

5746 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...