Question about Amerock Hardware & Accessories
How to change the lower hinge driver door on Jetta 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Reset the tire pressure warning, same as you would any service issue. Insert key in ignition, hold wrench button and min button, then start engine.
Posted on Jun 08, 2009
yes, you need a special tool to screw the brake piston back into the caliper housing. this is do to your disc brake set up. tool is available from harbor freight at around 40 dollars.
Posted on Oct 29, 2009
I have the same Problem. I Simply cut into the middle of the boot between the door and body The broken wire was right there, I pulled each end out and held the wire there with a pair needle nose pliers, stripped the end with a knife and attach a mulyi-strand jumper between both ends with electrial wire twists. Leave 2" approx. then slip the boot back over them. Use # 14 Wire. A Quick reasonable fix. If brakes again repeat again. The new Haness will have the same Problem down the road.
Posted on Apr 07, 2010
Testimonial: "I had the problem fixed at the dealer. It was the harness They made the harness longer & it was free.. "
Hi, on the VW Jetta 2006 to 2009, the cabin filter is underneath the glove box so lay down on the floor and look under to see the 2 plastic screws. Access is gained by removing two plastic screws and gently pulling down a piece of foam insulation. Once the insulation is removed you can see the filter 8 inch long by 2 inch wide black plastic face plate. You must slide the face plate toward the passenger side door.
The face plate will now come off and the filter will still be inside and you will have to pull it down. Debris will come out onto the floor mat below. Insert the new cabin filter, put the face plate back up an slide toward he drivers side to lock in place. Replace the insulation, re-screw the 2 screws, and you're back in business with fresh air and clean hands besides!
Posted on Aug 10, 2010
Tips for a great answer:
Aug 26, 2011 | 2007 Volkswagen Jetta 2.5 Sedan
Jun 19, 2010 | 2000 Volkswagen Jetta TDI
Feb 15, 2010 | 2007 Volkswagen Jetta 2.5 Sedan
Feb 02, 2010 | 1994 Volkswagen Jetta
Aug 19, 2009 | 2002 Volkswagen Jetta TDI
Jul 22, 2009 | 2006 Volkswagen Jetta
Oct 13, 2008 | 2007 Volkswagen Jetta 2.5 Sedan
Jun 14, 2008 | 1998 Volkswagen Jetta
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: