Question about Amerock Hardware & Accessories

Open Question

Dwd vf80m1 My door hinges of Deewoo dwd vf80m1 is broken. where can I replace it in UAE?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 29 Answers

SOURCE: Bottom hinge on fridge door broken

Yes, there is supposed to be a plastic bushing/washer under there. Usually 1/8 inch thick. If a dealer is not handy you may cut some out of plastic to put there. Then undo the top hinge, and carefully lift the door off (you might want to empty the shelfs). Put your spacer on the hinge pin, and replace the door and the top hinge.

Posted on Jan 28, 2008

Ad
  • 43 Answers

SOURCE: Replace door hinge on JVM1533WD002

Door Hinge replacement requires a Microwave Radiation Leak Test be performed after repairs.I am surprised they would sell you the part knowing this. You should have this repaired by a professional for SAFETY sake.

Posted on Jan 28, 2008

SOURCE: Door Hinge replacment

have you tryed taking the door screws out and put the new one in

Posted on Apr 02, 2008

gittos73
  • 244 Answers

SOURCE: door hinges broken and door fell off

yeah very easy and it should only cost at most about £10 undue the old hinge with the 2screws now the door will have two little covers that held the old hinge in place take these out and make sure u get the broken pieces out of them once u have the new 1 put it on the washer and screw down first and then place the covers on the ends of the hinges and put the door in place now redue the screws on the door

Posted on Jun 04, 2008

Puppet03
  • 172 Answers

SOURCE: Hinge for the Cartridge Door will not latch. Seems

good old duck tape ;) or go to a print repair shop and see if they have and parts for you.Ink shops sometimes do there own repairs too so try there

Posted on Oct 24, 2009

Testimonial: "Thanks I did not know the Ink shops could do repair. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I know if the hinge is broken on the stove door?


the door will fall off when opened if both hinges are broken, if only one hinge is broken the door will drop down on one side.

Apr 20, 2012 | Brown Stove Works Ovens

1 Answer

My nikon coolprix camera l14 battery compartment door broken. can I repair it in Abu Dhabi, UAE


ITS A TOUGH JOB TO FIND A REPLACEMENT . THE ONLY WAY YOU COULD DO IT IS TO USE A ADHESIVE TAPE OVER THE DOOR TO FIRMLY HOLD IT IN PLACE.
REGARDS.
PLZ. DON'T FORGET TO RATE THIS COMMENT.

Jul 07, 2011 | Cameras

1 Answer

Have replaced broken hinge but am stuck getting both fridge and freezer door back on. can do one or the other but not both. westinghouse freestyle fridge/freezer


srack from bottom up- bottom hinge - bottom door- tape door with duck tape- middle hinge- top door- tape top door- top hinge- remove tape- done

May 25, 2011 | Refrigerators

1 Answer

Door hinge on hygena single electric oven broken


You neede to replace both door hinges.
To get more detailed instructions on how to do this, go to the following site.

WWW.YOUTUBE.CO.UK

In the search box enter FITTING OVEN DOOR HINGES.
You should then click on the appropiate link, and follow the instructions.
Please rate my solution.
Thankyou.

Feb 03, 2010 | Ovens

1 Answer

Trunk door hinge like x-bar was broken, what if i


dear friend-it will be ok to weld the hinge

Nov 09, 2009 | 2004 Volkswagen Passat

1 Answer

Broken door hinge replacement on Hotpoint Ultima


Remove all the screws securing the 2 door halves together, and gently prize apart the two halves with a screwdriver or similar, be careful not to drop the door glass.. You will probably be better off removing the door from the front of the m/c altogether.
Replace broken parts as req'd.
Plz rate my solution
Thanks.

Dec 27, 2008 | Hotpoint Ultima WD72 Front Load...

1 Answer

The top hinge of my Neff integrated fridge freezer has broken so the door won't open and shut properly. Neff are sending replacement hinges but as a temporary repair I intend to swop the hinges around...


The top hinge of my Neff integrated fridge freezer has broken so the door won't open and shut properly. As a temporary repair I intend to swop the hinges around -replacing the top hinge with the middle one but can't see how to remove the hinges. Can anyone help?

May 02, 2008 | Refrigerators

2 Answers

Door Hinge replacment


my door indicator light wont stop flashing the door is locked

Mar 05, 2008 | Creda W100FW Front Load Washer

1 Answer

Bottom hinge on fridge door broken


Yes, there is supposed to be a plastic bushing/washer under there. Usually 1/8 inch thick. If a dealer is not handy you may cut some out of plastic to put there. Then undo the top hinge, and carefully lift the door off (you might want to empty the shelfs). Put your spacer on the hinge pin, and replace the door and the top hinge.

Jan 28, 2008 | Liebherr Premium CTP 3153 Top Freezer...

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amerock Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5353 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you an Amerock Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...