Question about HP Photosmart 3210 All-In-One InkJet Printer

Open Question

How do I reinstall the paper tray in my HP3210xi all-in-one printer?

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer show paper jam. how do I clear it to continue use printer


Open the printer up and remove any stuck pieces of paper. Check in the paper tray as well by removing the tray and looking inside. Remove any pieces of paper you see then reinstall the paper tray. Your printer should come back up with no jams. If it still says jam then cycle the power to the printer to see if it clears. If it does not clear, you still have a piece of paper stuck somewhere inside. If you can't find ANY paper stuck your printer may need to be cleaned.

Nov 08, 2017 | PRINTER Office Equipment & Supplies

1 Answer

Printer has red light, I used samsung's diagnosis software and it said that "tray 1 paper missing" even though I have paper on it?


Remove the paper tray from the printer and check for any media stuck in the paper path. Once any obstructions have been removed, reinstall the tray.

Dec 24, 2015 | Samsung CLP-315W Color Laser Printer...

1 Answer

Printer paper loader troubleshooting


try reinstalling your printer Once installed , you can keep up to date with the automatic updates of drivers

May 08, 2013 | HP Officejet 5610 All-In-One InkJet...

1 Answer

T652n 202.03 paperjam


1Open the upper-front cover and remove the toner cartridge.2
Look into the printer. Remove any jammed sheets of paper that you find there.

  • If the print job only consisted of this one page, reinstall the toner cartridge and close the front cover. Press the pattlnk_10162008_2247-select_button.jpg button to clear the error, and then try printing again.

  • If the print job consisted of more than one page, confirm the entire paper path is clear before printing again. Do the following:


    1. Remove the top paper tray ('Tray 1').
    2. Remove any jammed or partially-fed sheets of paper you find here, then reinstall the tray.
    3. Go around to the back of the machine and open the upper-rear cover. Remove any jammed sheets of paper you find, then close the cover.
    4. Once you have confirmed that the entire paper path is clear, reinstall the toner cartridge and close the front cover.
    5. Press the pattlnk_10162008_2247-select_button.jpg button to clear the error, and then try printing again.


  • If you cannot locate any jammed paper under the toner cartridge, then check the rest of the printer for any jammed paper. Do the following:

    • Remove the top paper tray ('Tray 1') and look for any jammed or partially-fed sheets of paper.
    • If you do not find any jammed pages there, reinstall the tray and go around to the back of the machine. Open the upper-rear cover and look there.
    • If the entire paper path appears to be clear, close the rear cover and power off the printer. Reinstall the toner cartridge and close the front cover. Power the printer back on. If a 200 error continues on power up, a sensor in the printer may be malfunctioning. This will require a service call to correct the issue. Please contact Lexmark Technical Support for additional information (see Contacting Lexmark Technical Supportbelow for details).

Aug 28, 2012 | Lexmark T652N PRINTER OPPENHEIMER SPECIAL...

1 Answer

Paper jam in hp1300 cannot print


Remove the cartridge and paper tray to see where the paper jam is. If it is a whole page jammed inside of printer, before removing shut off printer and carefully remove paper if you end up tearing a piece this will make it harder to remove in pieces. After you have removed jammed paper reinstall toner cartridge and paper tray turn printer on and see if this clears the jam error message.

May 28, 2010 | HP LaserJet 1300 Printer

1 Answer

Bought a refurbished CLX3160FN as I kept getting the low heat error then a high heat error. The machine finally died but as I had the second paper tray went for the refurbished printer. It came without the...


Yes, you can take the manual feed tray from one machine to another. To remove it do the following:
  1. Remove the paper cassette below the manual feed tray.
  2. Press the manual feed in a down to release the front latches.
  3. After the front latches release, move your hand toward the back of the tray and press down until the back latches release.
  4. To reinstall, you will need a flashlight to locate the holes where the back latches and the holes on the printer mate.
  5. Align one right latch to the right hole and then use some upper pressure to align the left latch to the left hole.
  6. Once the back latches are mated, push the tray up to latch the front of the tray.
  7. Reinstall the paper cassette.


Jan 27, 2010 | Samsung CLX 3160fn All-In-One Printer

1 Answer

CLX 2160 - paperjam


There is probably a jam in the paper feed area. Pull the paper tray out and stick your hand in to find and remove any paper stuck there. Then reinstall the paper tray and open and close the front door of the printer. The jam should be cleared.

If it is still showing paper jam, pull the tray out again and look to make sure you didn't miss any paper, then check the other areas of the printer (starting with the exit area) for paper.

Oct 24, 2009 | Samsung CLX-2160N All-In-One Printer

1 Answer

Paper tray is full and the paper light keeps flashing.


First check the machine for paper jams. If not, remove the paper from the paper tray and reinstall it. Then try to print from the MP tray.If this works, check paper size settings on the printer driver, or the small black arm which hangs down next to the paper pick up roller, and is the paper sensor.

Feb 09, 2009 | Brother HL 5040 Laser Printer

1 Answer

913 service motor error


If this is the first time you have seen this error, do the following:
  1. Power off the printer.
  2. Remove all installed paper trays.
  3. Make sure the paper is loaded correctly in each tray. If it is not, reload the paper into that tray.
  4. Look up into the printer where the paper tray slides in and out. Check the feed (autocompensator) assembly for any damage.
  5. If everything is fine, reinstall the tray and power on the printer.
  6. Try printing a few print jobs.
  7. If the error does not return, continue using the printer as before. Keep an eye on it for the next few days. If the error does not return, it may have been an isolated incident.
  8. If the error returns just as soon as you power on the printer or when you try to print again, you will need to find out which paper tray/paper source is causing the problem.
  • If the printer has only the one integrated paper tray, the problem will be with either the tray 1 pick arm/autocompensator assembly or the printer's engine/system board.
  • If the printer has more than one paper tray installed, try printing from each paper tray one at a time. The best way to do this is to have all of the paper trays empty and then proceed as follows:
    1. Put paper in tray 1 only.
    2. Print from tray 1.
    3. If tray 1 works fine, empty tray 1 and put paper in tray 2 and so on until you encounter the error message.
    4. If you receive the error when printing from one particular tray, power off the printer to clear the error.
    5. Power the printer back on.
    6. Skip the faulty paper feed slot and move on to the next one (if another one is present). If you can print from all but one of the paper trays, this is the source of the problem.

      If you have extra paper trays/drawer units installed and the error occurs from only one particular source, there are some things you can do as a temporary fix.
      • If the error is occurring from an OPTIONAL paper drawer/source, power off the printer and remove the defective drawer from the printer. You will then need to set up the printer to print from a different tray. For information on removing an optional drawer, click here.
      • If the error is occurring from the integrated paper tray (tray 1) AND you have optional paper trays installed, take all of the paper out of tray 1 but leave tray 1 installed. Set up the printer to print from one of the other paper tray sources (tray 2, tray 3, multi-purpose feeder, etc.).
    7. And if your getting the same error then you need to get it serviced...

Sep 09, 2008 | Lexmark Optra SC 1275 Laser Printer

2 Answers

No Paper Light wont go out


is this still a current issue?




Jul 22, 2008 | Brother MFC-8860DN Printer

Not finding what you are looking for?
HP Photosmart 3210 All-In-One InkJet Printer Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...