Question about Integra DTR-5.2 Receiver
I have an Integra DTR-5.2 receiver. For the tape deck input, I hear nothing coming out of the speakers until I crank the volume all the way up, and then the sound is very faint. I get no sound from the DVD player connected to the receiver, nor from the CD player. All cables are connected properly, and all inputs are set up correctly. I also tested the speaker cables with another amp, and they work fine. I opened the unit and checked the fuse; it's not blown. I tried different volume settings for the speakers to no avail. What is going on? Please help.
Most higher end integra's have a input level adjusment or input selection for each and every input. Perhaps you are not on the correct input, go to onscreen programming and check out the input level and input select - also try the tape in another input like tape 2 or cd. It will not hurt the receiver for a test. Also, if you are using the cheap cables from the manufacturer - try a pair of cables that you know work or go by some. BTW, you don't need to spend $40 for cables order them online through amazon or other store. Gold / sliver plated oxygen free are best.
Posted on Jun 30, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 09, 2011 | Pioneer VSX-D308 Receiver
Apr 11, 2011 | Audio Players & Recorders
Mar 13, 2011 | Audio Players & Recorders
Dec 30, 2010 | Audio Players & Recorders
Jan 08, 2010 | Integra Audio Players & Recorders
Apr 02, 2009 | Onkyo TX-SR803 Receiver
Mar 15, 2007 | Alpine CDA-7892 CD Player
659 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: