Question about Avanti WC1500DSS 30 Bottle Wine Chiller with Electronic Display

1 Answer

Has anyone replaced a compressor relay on this chiller? Looks like it is not designed for replacement, but if it can be done with a generic relay I would like to know. Thanks.

The compressor relay is not listed on the Avanti parts list for this chiller - apparently is sold as part of the compressor assembly. If the compressor has to be removed to replace the relay, then I expect the chiller is ready to junk.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 234 Answers

The cost of one of those compressors is over $100. When you factor in tax and labor you're better off junking it. Its also possible you have a compressorless cooler called Peltier.

Posted on Aug 16, 2014

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: AVANTI WCR683DZD WINE CHILLER - E4 ERROR CODE

I have the same E4 problem. You can order the PCB from Avanti at Miami Florida or your regional Avanti service rep.

Posted on Dec 16, 2009

  • 49 Answers

SOURCE: Avanti EWC-12 circuit board replacement (correction)

the green an yellow wire is a ground. Look for an area on the board with a ground symbol earth.gif. Can you not match the location from the old board???
Either way the black and red are your positive and negative power, while the third is the ground. The wire probably are located in close proximity to each other.
Let me know if this helps
Jer

Posted on Jan 16, 2010

Sea Breeze
  • 4655 Answers

SOURCE: Where can a I find

You don't really need the exact parts. Supco sells a RO81_1-12th HP to 1-5thHP that just slips on the compressor S,R and Common pins.

sea_breeze_218.jpgDistributor Locator
I would choose their parts over any OEM hard to find parts because they are simple and dependable, Thanks Sea Breeze
If helpful please Rate this solution.

Posted on Jul 15, 2011

  • 42 Answers

SOURCE: my avanti wine chiller mod ewc 16 b serial n.0800854 stop cooling what can i do ?

I've added a link for an Avanti ewcb,
http://www.retrevo.com/support/Avanti-EWC16B-Refrigerators-manual/id/867bh235/t/2/. There you can find a complete manual on the product which will help you to locate where the problem is coming from. hope I've helped!

Posted on Oct 31, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wine cooler does not stay cool


Do only if you are properly trained on live circuits.. Do at your own risk. Check the compressor's capacitor and the relay. Is the compressor getting juice?

Nov 23, 2013 | Avanti Refrigerators

1 Answer

HAVE A PARAGON A706 TIMER IN A OLD CARRIER CHILLER ,THE MOTOR IS BAD, NEED TO REPLACE TIMER OR MOTOR ,CARRIER DON'T OFFER A REPLACEMENT PART NOW,NEWER EQUIPMENT ARE USING CIR-BROADS, GOGGLE THE TIMER...


Here is a new control via e-bay:
http://cgi.ebay.com/Paragon-A-706-00-Hvac-Timer-Control-/170621558465 ($99.00)

This is the chinese generic version of the timer:
R 8004-TMDE706SC Problem is.... it is so generic that you must sort out defrost time required periods 115V 230V or 240V.

I have to be honest... you can probably walk into any reputable applicance parts source and find a generic timer much cheaper. (Match them up) What is the model number of the compressor? Per the timer specs.. you should have a 1/3 hp compressor. The LRA (locked rotor amperage) number on the side of the compressor is probably around 21.7 Amps. The failures on older equipment are run capacitors, and PTC relays / thermal overloads. There should be 3 posts on the compressor. C, R and S. You should read winding resistance C - R and C - S you should NOT read resistance C, R or S to chassis ground. (C maybe if it is internally grounded) If R or S read to ground the compressor has failed. Again if you insist on keeoing the unit you can get a generic 1/3 HP Embraco (or another brand) compressor.

Thanks for choosing FixYa,
Kelly

May 09, 2011 | Heating & Cooling

1 Answer

Compressor not coming on. Part looks like a relay burnt up, part #5SP04P437NFM 2220475 04 F03R. Question - would compressor work if part replaced? or is compressor gone?


Hello, Shake the relay. If you hear it rattle it's just a bad relay and you can replace it. If it does not rattle then the compressor is bad. If you have any other questions please feel free to comment again. Good Luck! Mike

Oct 19, 2009 | Whirlpool Refrigerators

1 Answer

AC compressor will not stay on during hot days


THE COMPRESSOR TRIPS DUE TO TWO REASONS, FIRST ONE IS THAT EXCESS GAS IS CHARGED IN COMPRESSOR CIRCIT AND DUE TO THIS COMPRESSOR OVERLOADS AND TRIPS. THE SECOND ONE MAY BE DUE TO THERMOSATIC VALVE LOCATED IN CHILLER (IN SIDE CAR SWITCH BOARD/DASH BOARD). FROM qayyum_khan875@yahoo.com

Apr 20, 2009 | 2002 Nissan Sentra

1 Answer

York screw chiller R-22


hi! there;
there are several causes we can consider in tripping of unit on auxillary sensor.the sensor device was designed to cut off source at specific limit of time or load.the over load sensor device was equipted to the main source specially on cmpressor of chiller to protect of burning the motor.
common causes of tripping off unit
1.high current on supply source.you can check this on one common line of compressor.using clamp ammeter.what ever reading you got when unit is running,compare this on rated current on manuals if high ampere was registered.ther is an overload supply the over load sensor will activate and cut off your unit.
a. source of overload is due to obstruction on refrigeration system,filter dryer are clogged,excessi9ve oil on high side.
b. themostat not cycles on,due to poor condensing fan, dirty condenser fin tube,or condeser insufficient cooling effect.
c. bearing,lubrication are not maintained usually on compressor on open type unit,

2. electrical wire and electronic control board short circuited.
a.sometime relay malfunction on cantactor w/c the supply souce intermittent either on one line supplying compressor,the compressor will suffer,it will just hum and trip off,

b.busted capacitor will trip off your unit,due to in the absence of starting motor.
this are common ways unit trip off, so regards and have a nice day,and one thing more don't forget to rate me, thank's


Apr 08, 2009 | Heating & Cooling

1 Answer

Replacing overload relay/capacitor on compressor of maytag fridge


replacing a start relay is very easy to do. usually its a swap the part wire for wire operation. in some cases you get a different looking relay but they normally have good instructions for the replacement part. if you'll post the model numebr fo your unit i can give you detailed instructions. thanks peyton

Mar 16, 2009 | Refrigerators

Not finding what you are looking for?
Avanti WC1500DSS 30 Bottle Wine Chiller with Electronic Display Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avanti Furniture Experts

Tom Chichester

Level 3 Expert

53051 Answers

Brad Brown

Level 3 Expert

18072 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Are you an Avanti Furniture Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...