Question about GE Energy Star WCVH6260F Front Load Washer

Open Question

What is wrong with my GE front laid washer?

GE front load washer won't drain after the wash cycle ends. It stops at 1 minute, then shuts off.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: GE Front Loading Washing Machine seems to be holding water....

manual

Posted on Mar 21, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: GE front load washer (clothes)

THANK YOU. for those of you with a screw driver, here are the photos on how to.

It takes a philips screw driver and 20 minutes. The white screws may not align perfectly but don't worry, just get them to go back in the hole(no harm done).

I'm going to admit it was my wife that found this fix, so now I give the step by step photos.

[IMG]http://i26.tinypic.com/23upff6.jpg[/IMG]
Small white screws (3 in total)
[IMG]http://i30.tinypic.com/69n9eh.jpg[/IMG]
cover "falls" off
[IMG]http://i29.tinypic.com/24erogl.jpg[/IMG]
Unscrew the lint trap (turn to the left)return when clean to hand tight
[IMG]http://i32.tinypic.com/9uralw.jpg[/IMG]
Bob's your uncle and a freebee for CMKX'rs.

Hub and wife team.

Posted on Apr 15, 2008

Anonymous

  • 5 Answers

SOURCE: GE Energy Star WCVH6260F Front Load Washer: door locking problem

http://www.instructables.com/id/GE-Adora-Lint-Filter-Cleanout/?download=pdf

Had the same problem, this fixed it!

Posted on Oct 31, 2008

Anonymous

  • 1 Answer

SOURCE: GE WCVH6260 Front Load Washer

I removed the three screws, and lower cover cleaned the few pennies, screws and nasty gunk build up from the filter. The wash machine seems to function as it did prior to the clogged issue. Thank you everyone !!!

Posted on May 31, 2009

Anonymous

  • 1 Answer

SOURCE: Washer doesn't run all the way thru cycles. It's

Removed hose connecting to water pump at tub. Removed clog (ink pen, coins, etc). Replaced and ran washer. Ran through all cycles - no leaking, no pausing of cycles. Problem is resolved.

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge washer won't let water spin out


Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101

Aug 11, 2011 | GE 3.2 Cu. Ft. 6-Cycle Super Capacity...

1 Answer

My ge front end loader washer won`t spin water or pump water out


Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Jan 29, 2011 | GE WSXH208A Front Load Washer

1 Answer

Kenmore HE2 won't finish spin cycle


you have blockage in you drain plug. to solve this problem you'll have to remove the lower front panel of your machine by removing the 3 (1/4") screws on the vary bottom of the machine. once the panel is removed you'll see a 1 1/2" white PVC drainage plug. turn the inner plug to the left in till open. (WARNING ALL THE WATER IN THE DRUM WILL DRAIN THOUGH THIS PLUG) remove debris likes socks or everything that's there replace the panel and your all set.

May 28, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

I have a GE WBVH6240HWW Front load washer. I


i would try to clean the trap out at the bottom, there is a panel on the bottom take that off and clean out the trap, it looks like a turn dial, something like that has happend to me, it cant hurt to try

Feb 24, 2009 | General Electric WBVH6240HWW Front Load...

3 Answers

GE WASHER WON'T GO THROUGH THE DRAIN CYCLE AFTER WASH CYCLE


ck wiring to motor be sure all conections are tight lid switch is ok since will agitate also ck control bd for connections most likely suspect all ck ok is control bd itself

May 20, 2008 | GE WBB4500EWW Top Load Washer

2 Answers

GE Front Loading Washing Machine seems to be holding water....


The high speed spin of a front load washer should normally do a good job of getting squeezing out the water but if there is an oversudsing condition that makes it hard for the drain pump to operate then the suds and water will just stay there. First make sure there is no actual clog in the drain line then run a load with no soap or detergent and see what happens. It's always better to use a low suds detergent with this type of machine

Mar 08, 2008 | GE WSXH208A Front Load Washer

Not finding what you are looking for?
GE Energy Star WCVH6260F Front Load Washer Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

geapptech

Level 2 Expert

157 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...