Question about Haier BC112G Wine Cooler

Open Question

Why is my Haier wine cooler not cooling at all?

I have power, I can adjust temp, I can turn on the light and I can hear relay click but that is all that happens. Can you please tell me that there is an easy and inexpensive fix. thank you

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Haier Wine Cooler won't cycle on and off automatically

Hey all,

For those of you who have problems with one or both or your zones not cooling on the HVTB18DABB or similar wine cooler/cellar, the problem lies the Peltier-style thermoelectric cooling module. The original part is "TEC1-12706" and information on it can be found on google. Finding this or a similar part on ebay can be done by searching for "thermoelectric cooler". If the exact TEC1-12706 part cannot be found, then any similar part that's 40mm x 40mm in size, and 51 to 69 watts should do fine. For $25 I was able to get 3 modules...one to replace the bad zone I had, and then I'll have 2 spares in case the other zone, or this new one, ever go bad again.

To replace the part you must remove the back panel from your Wine cellar. You will see 2 big fans attached to two large heat sinks. (If a heat sink on the back does not feel warm to the touch, the the other side is obviously not cooling, which means that zone is broken.) Remove the screws from the fan and the heat sink of the zone that is not cooling, and while holding the heat sink, pull the whole cooling assembly for that zone out. Dont be alarmed if you feel some insulating foam separating as you pull it out, its a tight fit so that is to be expected. Once you have the cooling assembly out of the fridge, take it apart and you will see the square ceramic cooling module inside. (REMEMBER which way the module was oriented before you remove it, so you know how to put the new one in.) Clip the red and black wires near the module and remove it from the assembly. DON'T wipe away any of the white thermal grease left behind on the heat sinks. If you have any extra thermal grease handy (available at Best Buy, or online at sites like newegg), apply an extra pea-sized dab to both sides of the new module. Put the assembly back together and splice the wires from the new module to the loose wires left behind going into the back of the Wine cellar. Mount everything back in place as before, close up the back, and youre done!

This is really a lot easier to do than it sounds, especially if you're comfortable doing this sort of thing...a few pictures would explain much better if anyone wants to illustrate.

These are actually great units, so I hope this helps somebody fix theirs!



Posted on Sep 24, 2008

Ad
meBNme
  • 334 Answers

SOURCE: Haier Wine Cooler motor died

Yes, those motors shoudl be pretty standard stock items at any local appliance parts supply house found in the yellow pages.

You might also try lookinmg under "motors and controls" in the yellow pages. If you get it locally like that then you can physically compatre the old one with the new one to make sure it is indeed the same part.

Thats better than an online link with just pictures.

Posted on Jan 27, 2009

  • 306 Answers

SOURCE: Making clicking sound motor gets hot but not cooling

Your PTC relay on the compressor is bad needs to be replaced.

First be sure to unplug cooler. Remove the cardboard cover that covers most backs of the units. Remove the plastic cover that is on the side of compressor. It is held on with a metal clip. Now you should be able to see the relay pry the relay straight off. note the wiring and position of relay. Only three prongs on compressor. Go to a parts house for appliance's and with your make and model number should be able to get a new one. Let me know if you need any more help. ken

Posted on May 03, 2009

meBNme
  • 334 Answers

SOURCE: Want to purchase relay. Can't find part locally.

The best thing to do is go to your local appliance parts warehouse and match up the relay with what they have in stock.

Be sure to briung all relevant info you might have on the unit.

That way you can ask for the RF-5600-01 to compare it before purchasing. Thats exatly what a service tech would do if you called one, only they will charge you 50 to 100 bucks to do it.

Posted on Aug 25, 2009

  • 183 Answers

SOURCE: Wine temp on Haier wine

The error is likely caused by a bad temperature sensor. The control board may still be Okay.
Replacing both of them is recommended.

Check this link for parts: http://www.partstore.com/Model/HAIER+AMERICA+TRADING/Haier/BC112G.aspx

Posted on Dec 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Haier BC112G. It is not cooling at all. Temp panel works, so I can set the thermostat up or down, but nothing happens and it just goes back to room temp after that.


Our magic chef wine cooler (mcwc50dbt) when temp is set on digital panel at 45-50 it jumps immediately back to 70 degrees constantly

Sep 25, 2013 | Haier BC112G Wine Cooler

1 Answer

How to temp. to cool


Push & hold the red wine button & the white wine button. This will start the adjustment process. Let go of both & use the plus & minus buttons to control the temp. When you are done hit the light button & the unit will record the new temp.

Feb 16, 2012 | Haier BC112G Wine Cooler

1 Answer

I have a MCWBC77DZC magic Chef wine cooler 2 years old all of sudden stopped cooling. The power is ok but as I adjust the temperature it does not hold and goes back to room temp. It seems liek the relay,...


I have a MCWBC77DZC that stopped cooling too. After reading several post on websites, I replaced the compressor start relay and is now cooling again. Horray! Ordered the start relay from www.RepairClinic.com Item number 1795921 Part #: 6R8MG $20.55

May 10, 2011 | Magic Chef MCWC44DZ Wine Cooler

1 Answer

How to adjust the temperature of the wine cooler


How is temperature adjustment set for proper cooling,my Haier holds [9] btls of wine ,please help.

Jan 05, 2011 | Haier BC112G Wine Cooler

1 Answer

Power surge caused wine cooler to quit cooling


Power surges, spike and brown-outs are a nemesis to small refrigeration units. The capacitor for the compressor likey was affected and possibly the start components in general, especially if the unit was operating when the surge occured.

Jul 20, 2010 | Haier BC112G Wine Cooler

1 Answer

THE UNIT DOES NOT COOL ANDY COLDER THAN ROOM TEMPERATURE.


does the compressor run ? if so you could have a low refrigerant charge, a sealed unit resrtiction, leak or defective compressor.

Apr 30, 2010 | Haier HVUE08A Wine Cooler

2 Answers

Clicking sound and not cooling


compressor grounded. replace relay or compressor

Jan 02, 2010 | Haier HVFM20ABB Wine Cooler

1 Answer

Making clicking sound motor gets hot but not cooling


Your PTC relay on the compressor is bad needs to be replaced.

First be sure to unplug cooler. Remove the cardboard cover that covers most backs of the units. Remove the plastic cover that is on the side of compressor. It is held on with a metal clip. Now you should be able to see the relay pry the relay straight off. note the wiring and position of relay. Only three prongs on compressor. Go to a parts house for appliance's and with your make and model number should be able to get a new one. Let me know if you need any more help. ken

May 03, 2009 | Haier HVFM20ABB Wine Cooler

4 Answers

Haier wine cooler


Haier BC112G service & user manual:

To adjust the temp of your unit:
  • Push & hold the red wine & white wine button at the same time.This will start the temp adjust. You will notice the plus sign & the negative sign on these same buttons, use them to adjust temp. When you are done hit the light button & it will record the new temp.

Nov 25, 2007 | Haier BC112G Wine Cooler

Not finding what you are looking for?
Haier BC112G Wine Cooler Logo

Related Topics:

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Furniture Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Felizardo Erilla
Felizardo Erilla

Level 2 Expert

241 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Haier Furniture Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...