Question about GE Energy Star WCVH6260F Front Load Washer

Open Question

Front load washer

Door is locked and none of the controls are working

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

prem mathew

  • 1294 Answers

SOURCE: washer load became imbalanced and forced door open, now cannot close door, lock stuck and washer will not run

Perhaps you have to change your lock, this is a sensitive point & will affect the smooth operation of your machine. Re. the inbalance, you hv to screw up & lock the front 2 legs (with check nut), adjust the front legs (screwed up) only to see if the machine does not move during wash/spin.

Posted on Nov 29, 2007

Ad

Anonymous

  • 5 Answers

SOURCE: washer won't drain

http://www.instructables.com/id/GE-Adora-Lint-Filter-Cleanout/?download=pdf

Had the same problem, this fixed it!

Posted on Oct 31, 2008

Anonymous

  • 5 Answers

SOURCE: GE Energy Star WCVH6260F Front Load Washer: door locking problem

http://www.instructables.com/id/GE-Adora-Lint-Filter-Cleanout/?download=pdf

Had the same problem, this fixed it!

Posted on Oct 31, 2008

Anonymous

  • 360 Answers

SOURCE: My GE Washer Door Won't Lock

Try this, press the pause/cancel button twice. Open the door, ensure there is nothing blocking the door and close the door fully. Open the detergent drawer fully and re-close the drawer. Select Quick wash and press start.

If this does not correct the problem, call for service under warranty.

clarkco

Posted on Feb 19, 2009

Anonymous

  • 1 Answer

SOURCE: GE Front Load Washer Model WBVH5100HWW - door lock light is on

I queryed another site; justanswer.com with technician Larry, who provided the solution. Replace the door latch assenbly part # WH10X1006 $146.99 from GE. A local parts house had the identical under a Whirlpool # WP8182634 for 59.46. Install the new assemble and all is well.

Posted on May 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The washer door is locked and will not open


Problem with Maytag MHWE450WW front load Maytag washer. The washer door is locked and will not open. I tried several suggestions in the manual, but none work. Please help!!! My email address is
hummingbird54@verizon.net and my name is Antoinette Roy

Oct 10, 2012 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

The door lock stays lit and when I go to turn it off nothing happens. None of the controls work.


First you can try unplugging for about fifteen minutes or so. If that doesn't do it then it is your safety switch on your washer.

May 06, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Its says control locked and none of the buttons will work on the front loader. thanks, Rita


Let me find my notes:

Various control lock features on differing models:

Press the end of cycle signal button for 3 seconds

OR

To reset press the DRAIN/SPIN button and hold it for 15 seconds.

OR

Press and hold the END OF CYCLE button for 15 seconds to reset the control.

OR

Unplug washer
Remove lower kick panel
Reach up and locate bottom of door lock switch
Grab the teardrop shaped tab
Pull gently till yall hear a click
The door will be opened

OR press options and select for 10 secs till LOC is no longer displayed

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Apr 01, 2011 | Kenmore 4292x Front Load Washer

1 Answer

Control locked


Hold the control lock button down 5 seconds and it should unlock.

May 15, 2010 | KitchenAid KHWS01PMT Front Load Washer

2 Answers

44072 Kenmore Washer - Front Door Won't Lock


There is a black peg on the round housing of the washer that gets pushed in when the door is closed and the machine locks the door. If the peg gets broken (as mine did) the machine won't lock. I now use a small screw...or you can buy a replacement part for the whole mechanism.

Feb 13, 2008 | Kenmore 44072 Front Load Washer

1 Answer

Won't wash


also the wax motor and microswitch in the door lock can do it

Feb 10, 2008 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Duet front load washer control locked--How do I undo??


Unplug washer or disconnect power.
2. Remove the lower kick panel.
3. Reach up along the inside of the front and locate the bottom
of the door switch/lock unit.
4. Located on the bottom of the door switch/lock unit is a
tear-drop shaped tab.
5. Gently pull the tab down about a ¼" or until a click is heard

Dec 28, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
GE Energy Star WCVH6260F Front Load Washer Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

geapptech

Level 2 Expert

157 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...