Question about Brother Wireless Color Laser MFC-9340CDW All-In-One MFC9340CDW

2 Answers

How can i reset the toner on a brother mfc9340cdw printer

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

How I Reset My Brother MFC9340CDW Series Printer on 12/3/17
First you should make sure that the printer is turned on. Then the following steps should be performed :
i. Open the front cover. With the front cover open, the LCD should
display "Cover is Open".
ii. Hold the the # and the * buttons down for 5 seconds until Reset Menu is displayed.
iii. Press the UP ARROW until TNR-STD-(X) is displayed where X={K for Black, Y for Yellow, etc.}
iv. Press the OK button.
v. The LCD will briefly display "Accepted".
vi. Close the front cover.
The printer should start working after following the above process.

Posted on Dec 06, 2017

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Brother Expert
  • 270 Answers

Auto detect if it is a new original toner.

Posted on Sep 08, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced waste toner box. Continue to receive "Replace Toner Box" message. Have insured that all parts back in properly. Will not print.


There is normal a clear plastic section on most waste toner boxes that tell the printer / copier how much toner is inside check to make sure it is clear! Dump the toner out if you don't have a new one BE CAREFUL CAN GET VERY MESSY. DO not use water to clean up use vacuum but do be care toner particles are small enough to go thru some vacuum filter so try some small amout make sure it does not spray your wall! Also check make sure the toner box does not have any broken small tabs the indicate to the printer thr the box is properly installed, one other check if the box has clear section match that section in the printer and clean that area sensor the monitors the clear section may have toner in it.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Nov 22, 2015 | Brother MFC9340CDW Wireless Printer...

1 Answer

Brother MFC not printing in color


go into printer properties and set the colour as default.
normally when you go to print something there is a tab section that will get you there before you actually press print

May 24, 2015 | Brother Wireless Color Laser MFC-9340CDW...

3 Answers

Default passwords


If you contact the manufacturer, they should be able to provide this needed default password. Best Wishes

Sep 01, 2014 | Brother Wireless Color Laser MFC-9340CDW...

1 Answer

How do you reset counter on Toner for TN-360


No, If you use a refill in your recent toner cartridge you need to reset the toner, if you use a new toner cartridge, no need to reset.

Aug 28, 2014 | Brother MFC 7840W Printer

2 Answers

Brother DCP-9020CDW - How can I reset the toner life?


Hi there
You can reset the brother dcp 9020cdw toner cartridges using the printer menu. Its simple. see video on the link
http://www.zinetic.co.uk/Blog/resetting_the_brother_dcp_9020_cdw_toner_cartridges-blog.aspx

Nov 18, 2013 | Brother DCP-7020 All-In-One Laser Printer

2 Answers

Brother 9970cdw toner


The Brother printers have a counter which will shut the printer down when the preset number of copies has been reached. You can reset the counter and it should print again. I did this 4 months ago. It bought me a little time, but my printer has begun to print a solid line down the left side of each page. I have cleaned everything that I can access to rule out smudged glass, etc. Perhaps it is just best to replace the drum or buy a new printer(much to Brother's delight and design).

Jul 10, 2012 | Brother MFC 7420 All-In-One Laser Printer

1 Answer

Brother 5250DN Printer Toner light


Try resetting the toner counter manually;  * Turn off the printer and open the front cover * Press and hold the Go-button down * Turn on the machine while still holding button down, when all three LEDs are lit, release Go-button * Press the Go-button twice, and all three LEDs should be lit again. * Press the Go-button five times (six times if you have the High Yield toner) * Close the front cover and the toner counter should be resetted.

Jun 02, 2009 | Brother HL 5250DN Laser Printer

2 Answers

Replaced toner cartridge and light stays on the printer will not


how do i set the toner reset lever on a brother hl 5250 printer

Mar 31, 2009 | Brother HL 5250DN Laser Printer

Not finding what you are looking for?
Brother Wireless Color Laser MFC-9340CDW All-In-One MFC9340CDW Logo

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

481 Answers

Jim Keysor

Level 2 Expert

331 Answers

ctnozil

Level 2 Expert

270 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...