Question about Televison & Video

1 Answer

How do I program a dvd player with the new xfinity x1 remote? The instruction manual does not tell us how.

We do not see how to program our dvd player with the new xfinity remote

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,247 Answers

It is my understanding the xfinity remote is designed only to control comcast set top box and TVs. It also can control audio receivers. It is unlikely you can control a DVD player with it.

At best you could try and use the programming instructions on page 5 of the manual and see if it picks up your DVD player. Otherwise it might be better to use the existing remote controller you have and program the Comcast set top box to it. You need to find the codes from the programming instructions of the original remote control and you will also need to know the model number of your comcast box.

Hope this helps.
https://x1.comcast.net/webportal/assets/pdfs/RemotePairingGuide4.26.11.pdf

Posted on Sep 12, 2014

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: Remote Code for Magnavox DVD Player BDP170MW8 to LG HD-TV 42PC5D

Try Code 038

Posted on Feb 19, 2008

Anonymous

  • 1 Answer

SOURCE: one for all remote urc-3220 to koss dvd player ks-4110

i need the code to program my koss player on the one for all replacement urc 4220 remote

Posted on Dec 20, 2008

Anonymous

  • 2 Answers

SOURCE: need manual for Magnavox vcr and DVD players

If it's a dvd player/VCR-DV220MW9 I have one. I don't need the manual anymore but I have a different problem the book don't cover

Posted on Mar 27, 2009

Anonymous

  • 6 Answers

SOURCE: Have remote, but no manual, PLEASE HELP

Hello,

If it is an original Cyberhome RMC-300Z remote, you should not have to do anything to it. I had lost mine too and I just picked up a used one on Ebay. It did not require any programming.

Posted on Apr 02, 2009

Anonymous

  • 1 Answer

SOURCE: remote tv compatible codes

the default for the rh7823w remote is to operate lg tvs. Popping out the batteries should reset the default. my manual saysto select a different tv hold down the tv power button, press the number buttons for the manufacturer code then release power button.

codes are

LG/Goldstar 1(default), 2
zenith 1,3,4
samsung 6,7
sony 8,9
hitachi 4

good luck

Posted on Aug 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need more codes to install comcast cable to my 32 in hdtv+dvd


https://www.xfinity.com/support/remotes/ https://www.xfinity.com/support/remotes

use the codes on the site if they fail use the manual program remote code finder in the program manual. i believe its
setup ( hold it down )
991
ch + ( SLOWLY UNTIL TV SHUTS OFF )
then setup to lock in code ( just press once )

May 01, 2017 | Comcast Televison & Video

1 Answer

What is the code for xfinity cable xr2 remote control?


Your XFINITY remote can be paired with XFINITY X1 TV boxes, allowing you to control the TV box even when it is placed out of sight, such as in an entertainment center or in another room (up to 50 feet away). XFINITY remotes can be identified by the model number on the back panel or within the battery compartment of the remote.

Note: Once your remote is successfully paired with a TV box, it will not control any other TV box until paired with the other TV box. XFINITY remotes can only be paired with one TV box at a time.
To Pair an XFINITY Remote Note: These instructions apply to XR2, XR5 and XR11 model remotes only.Make sure the remote batteries are installed and your TV and TV box are powered on.Set the TV input to the input connected to the TV box.Press the Setup button on your remote until the LED at the top changes from red to green.Press the xfinity button on the remote. The LED will begin flashing green. (Note: When pairing an XR2 or XR5 remote to a DTA, you may need to press the xfinity button up to five times).Follow the instructions by entering the three-digit, on-screen pairing code.
Once the on-screen pairing code is correctly entered, your remote is paired with the TV box. Note: If you do not see on-screen pairing instructions after pressing the xfinity button in step four, press the xfinity button again. You may need to press the xfinity button multiple times if there is more than one TV box in range.
how4474_072816_01-kmuj4sm5av3gyijxunj5wf5e-1-0.png NOTE THE BELOW CODES ARE FOR THE SAMSUNG SMART TV's ONLY
Type in the 4-digit or 5-digit code listed below using the number buttons. Additional codes may be found in the remote manual.
Most likely code
10812
Others to try
11632, 10702, 10060, 11959, 10766, 11903, 11060, 10587, 10329, 10482, 10650, 10814, 10032, 10178, 10030, 10019, 11575, 11597, 10427, 10408, 10217, 10056, 11581 for more info on what device you are trying to pair it with the codes are available here > https://www.xfinity.com/support/remotes/ Just select the Remote and the device and continue and the page will display the most common codes for that Device you are trying to pair it with.

Apr 26, 2017 | Televison & Video

2 Answers

Can I program a GE 24116-V2 universal remote control to operate a Xfinity X1 Cable box ?


This remote control have no setup codes to Xfinity. If you wish to get more details visit the site linked here. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ http://homenol.blogspot.com/ Setup procedure and set up codes for many popular brand remote controls are given.

Feb 08, 2017 | GE Televison & Video

1 Answer

I need to set up remote for DVD-V98000


Is this a universal replacement remote or the same one that came with your DVD player? If it is the same remote, you should be able to find programming information in the DVD player's owner manual. The link to your player is below. Find the Remote programming information in chapter 6.

Blu ray DVD Players

Oct 10, 2014 | Samsung DVD-V9800 DVD Player/VCR

1 Answer

Remote code


This gpx d108s does not support universal remotes.
http://tv.manualsonline.com/manuals/mfg/gpx/d108s.html?p=11

Sep 08, 2013 | GPX D108S DVD Player

1 Answer

Scientific Atlanta 8300hdc remote program instructions


Don't know the exact code for your STB, but you can download the manual from http://www.yamaha.com/yec/products/productdetail.html?CNTID=5027893&CTID=5000300&RLTID=1505&DETYP=RELATION ,
There you can find the list of all codes and also how to program them into the remote.

Apr 09, 2009 | Yamakawa DVD-218 DVD Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Cindy Wells

Level 3 Expert

6034 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...