Question about Amerock Hardware & Accessories
When you pull on the inside handle it will open the door at times and other times it won't.
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Door panel will have to come off to repair, most likely has broken door handle or cable/linkage problem.
Posted on Nov 30, 2008
most likely the inner door handle has a broken hooking tab for the rod to the latch plate.most door panels are held in place with a few screws around the door pull handle and arm rest than most of the sides and bottom of the door panel are held by plastic snap clips. with a large straight blade screw driver start at a corner of the door panel , slide the blade of the screw driver under the edge of the panel and lightly pry out untill you lossen up one of the clips than slide along the screw driver to the next clip , keep going till the panel is lossened up.
Posted on Mar 29, 2009
I have a 99 Yukon. Had the same problem. I took the door panel off and discovered that the door handle has a spring attached that appeared to degrade. Bottom line is I changed the entire handle, not too expensive, and it now works fine.
Posted on Jul 07, 2009
you"ll have to remove the door trim and replace or reposition the cable/rod assembly that has move out of position not too hard to fix dont worry
Posted on Jun 06, 2010
Tips for a great answer:
Dec 02, 2015 | Cars & Trucks
Mar 04, 2013 | Cars & Trucks
Oct 15, 2012 | Samsung SMH9187 Microwave Oven
Aug 27, 2012 | 1989 Toyota Corolla Sedan
Jun 03, 2010 | 1997 Toyota Avalon
Oct 11, 2009 | 1998 Jaguar XK8
Oct 09, 2009 | 1995 Pontiac Grand Prix
Jun 19, 2009 | 1995 Ford F150 Styleside Regular Cab
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: