Question about Uniden DECT 6.0 Cordless Telephone Expansion Handset
My grandson hid one of my phones(I have a base with 3 additional outlets) and I ordered a compatible replacement using the serial number and Dect #. When I received the replacement, I realized the missing phone was the base one. Is there any way I can convert this to use as my base phone? My email is firstname.lastname@example.org
Posted by Anonymous on
Use the find a phone facility in the phones use one to find the rest
Posted on Oct 13, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I had a similar problem which I finally fixed. You did not say if any of your phones registered.
First try the following recommended by Uniden Support:
Your phone(s) should be fully charged before putting them on the main base.
Unplug the battery from the phone by removing the battery cover and removing the connector. Then, push the # and * key together and hold while you plug the battery back in (requires some dexterity). Continue to hold the two keys until you hear a confirmation tone. This will force the phone to reregister. Put the phone on the main base (if you are sure it has a fully charged battery) and see if it will reregister it to solve the problem.
That did not work for me. So, I followed the instructions to de-register the handset (even though it hadn't really registered). But, I also pretended like the Base was not available (because using the base in this step also failed).
1) Press and hold the hang up and # keys for at least 5 seconds.
2) Move the cursor to select Base Unavailable and then press Select.
3) Select the base you want to deregister from, press Select and then move the cursor to Yes and select.
This causes the phone to delete any of its base information.
At this point, again insure that your phone shows the battery is fully charged and if it is not, put it on the stand alone charger base (not the main base). With the battery fully charged, place it on the base and try registering again by placing it in the main base.
If neither of these approaches help, contact support at Uniden.com.
However, my problems were cleared when I cleared the handset with the second set of instructions.
Posted on Apr 26, 2009
I was using this site while trouble shooting this in the US...
If the customer has DSL with filters in the same system go back to the NID and Isolate the DSL,
test the caller id and call waiting caller id. If this works you have Data Bleed coming from the DSL.
Make sure there are not two sets of filters on the line. Tjis customer had a filter with the DSL modem.
Doing this we just fixed an on going problem for a field tech who was the second callout on a customer issue.
Posted on May 11, 2009
Caller ID standards are different in India,so caller id won't display ; need to buy a converter which converts from DTMF to BellFSK standard
Posted on Aug 24, 2009
Tips for a great answer:
May 30, 2017 | Panasonic Lands Phones
Apr 01, 2012 | Candy CNW136 Front Load Washer/Dryer
Apr 11, 2011 | Uniden Additional Handsets - DCT640 Phone
Aug 17, 2010 | Vtech DECT 6.0 Digital Cordless Phone
Dec 29, 2009 | Philips DECT 6.0 Phone with VOIP
May 22, 2009 | Uniden DECT 6.0 Cordless Telephone...
May 05, 2009 | Lands Phones
Mar 26, 2008 | GE 28112 Trio Cordless Phone
Jan 20, 2008 | GE 28111EE2 Cordless Phone
Oct 08, 2016 | Uniden DECT 6.0 Cordless Telephone...
103 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: