Question about Denon AVR-E400
We had this problem before when we hooked up our AppleTV and you instructed us on the procedure to reconnect all the components. I recently changed the satellite cable and hooked it directly to the AVR and the AVR is connected to our TV. Now we get the "requires HDCP for playback" message and no streaming. What should I do?
Posted by Anonymous on
Personally I would use an RCA cable and hook up the AVR.
((RCA out of TV to AVR audio in))
((cable box HDMI cable output to TV HDMI Input1))
(As far as the AppleTv I would use a separate HDMI Input2)
If your AVR has a dvd or blue ray player Hook up a
HDMI cable out to another Input HDMI3 of the TV
using separate inputs on the tv will allow your surround system to be
used on all modes(CABLE,DVD/BLUERAY,APPLETV)
Posted on Oct 04, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You can also use a digital coax cable (color orange) to go into coax 1 for DVD coax 2 for cable box. Just make sure to set the coax in input settings. The coax cables are a little cheaper than the optical cables and work just as well.
Posted on May 10, 2008
Unless you are having res. issues you can use component / optical / coaxial cables to connect all your devices to your denon and from your denon to your tv using component cables also
Posted on Feb 25, 2009
It may may the the AT+T box is really not compatible with the AVR or the Pioneer.
Check the specs on those input/outputs for the Ubox and the receiver.
See if they agree. If so, try another hookup method like HDMI ( which carries the audio too)
Posted on Apr 11, 2009
SOURCE: No video on Denon avr 688
After days of frustration the real problem was with the cable box. It needed a firmware update. Following forum advice I disconnected the cable box power cord for a few minutes, reconnected it, allowed the cable box to reinitialize. Turned off receiver and TV. Turned TV back on and set it to HDMI connection, turned on receiver and all worked fine. Great picture and sound.( Needed to buy an optical cable to go from the cable box to the receiver to get sound from the speaker system. )--the dirtybird
Posted on Apr 15, 2009
Tips for a great answer:
Feb 08, 2015 | Denon AVR-E400 7.1 Channel 4K and 3D Pass...
Apr 18, 2014 | Denon Audio Players & Recorders
Oct 07, 2013 | Denon AVR-1604 Receiver
Jun 08, 2012 | Audio Players & Recorders
Mar 05, 2010 | Denon AVR-1908
Feb 27, 2009 | Denon AVR588 Receiver
Jan 29, 2009 | Denon AVR588 Receiver
Jan 03, 2009 | Denon AVR-1907 Receiver
Dec 27, 2008 | Denon AVR-900 Receiver
Nov 05, 2008 | Denon AVR-1905 Receiver
277 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: