Question about Epson Stylus Pro 9600 InkJet Printer

Open Question

How i change pump/cap/cleaning assembly on epson 9600 printer

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: unclog yellow

Same problem yellow almost completely clogged, any tried a power clean from the printer control panel?

Posted on Sep 05, 2008

Ad
ginko
  • 19396 Answers

SOURCE: Epson Stylus Pro 9600 vs Agfa Sherpa44

The Agfa Sherpa is not manufactured by Epson. Both Epson and Agfa buy and retag their printers from Mutoh.
I do not know if the 44 is the same as Epson 7600 or 9600, but it should fit the same cartridges.

If the printer does not accept the cartridges, that means that there is something different in the software stored in the Epson cartridge chip.

In this case you will be only able to use only Agfa or Mutoh Falcon cartridges.

Posted on Oct 27, 2008

rulds2008
  • 3866 Answers

SOURCE: epson 9600 magenta won't print - have new cap assembly installed

The ink should come out of the cart. if not the cart is the problem at this point try anothere magenta if that does not shore it up then you need to then start looking at the print head where it goes it itself now the store you bought the ink from will give you a replacement no questions asked sometimes even if you dont got the reciept. Try those steps you be glad you did.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Posted on Apr 23, 2009

  • 2 Answers

SOURCE: I have a Epson 9600 pigment printer,I am using

It probably has to do with the chip embedded in your cartridges. This tells the printer what kind of ink you're using. Your cartridges could have the wrong chip.

Posted on Nov 18, 2009

taran_2005
  • 10515 Answers

SOURCE: Hi, On Epson stylus Pro 9600.

Hi,

ORDER your printhead directly from here

http://www.alibaba.com/showroom/epson-print-head-9600.html


The 100005 is a maintenance required error! The maintenance needed is a different printhead. Ensure that you purchase the printhead that comes with a good return policy in case the error continues. NOTE: With exchange of the printhead, this error normally goes away.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Apr 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maintenance required 0040 code


Hello.

Your error code means the Pump/Cap/Cleaning assembly has reached the end of its life and will soon fail. This is a major replacement part and it is typically more cost effective to replace your printer rather than repair.

You can continue to print, but soon you will experience leaking ink, damaged hardware and poor prints.

Hope this helps.

Nov 14, 2009 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

Epson 9600 no ink coming out


That happens to me as well I'm using epson R230x pigment ink. At first yellow does'nt come out. and fixing the yellow by pumping it with a solution and putting everything back ALL HEADS ARE NOT PRINTING ANYMORE....

Sep 26, 2009 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

Epson 9600 print head missing numerous nozzels during test print procedure. Tried power clean several times. Do you have a remedy?


You willl probably need to clean the Pump Cap Assy.

You will need a strong flashlight/clip-on lamp to see what you are doing up in the area you are cleaning.

Move the print head to the left side of 9600. (If you need help with this let me know.)

Use a foam tipped swab slightly dampened with warm water to GENTLY wipe around the seal area of the Pump Cap Assy.

DO NOT USE A COTTON TIPPED SWAB !!!

Dip, Blot, & Wipe. Clean the Foam Swab often to wash off the residue it will pick up. Remenber to keep the swab slightly moist - not dripping wet.
---
If this does't help, it generally means that the Print Head is also very clogged with gummy/dried ink.

The Print Head cannot be cleaned without removing the Right Side Cover & then removing the Pump Cap Assy. This removing and cleaning is about a 1.5hr-2hr job for an experienced tech. Anyone with moderate mechanical skills can do it though.

Pump Cap Assy cleaning is usually done BEFORE replacing the Print Head.

If the Print Head cleaning doesn't work then a New Print Head is in order.

Hope this helps ! Good Luck !

Jun 10, 2009 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

Epson 9600 magenta won't print - have new cap assembly installed


The ink should come out of the cart. if not the cart is the problem at this point try anothere magenta if that does not shore it up then you need to then start looking at the print head where it goes it itself now the store you bought the ink from will give you a replacement no questions asked sometimes even if you dont got the reciept. Try those steps you be glad you did.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Apr 23, 2009 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

Epson 9600 quit printing all colors even when trying to print head alignment, I have pulled off head and cleaned and power cleaned several time.


Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 07, 2009 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

Epson Stylus Pro 9600 vs Agfa Sherpa44


The Agfa Sherpa is not manufactured by Epson. Both Epson and Agfa buy and retag their printers from Mutoh.
I do not know if the 44 is the same as Epson 7600 or 9600, but it should fit the same cartridges.

If the printer does not accept the cartridges, that means that there is something different in the software stored in the Epson cartridge chip.

In this case you will be only able to use only Agfa or Mutoh Falcon cartridges.

Oct 27, 2008 | Epson Stylus Pro 9600 InkJet Printer

2 Answers

Unclog yellow


Same problem yellow almost completely clogged, any tried a power clean from the printer control panel?

Jul 12, 2008 | Epson Stylus Pro 9600 InkJet Printer

2 Answers

Epson Stylus Pro 9600 horizontal banding problem


the banding is a result of clogged head. I had the same problem and fixed it with many cleanings.

Jul 12, 2008 | Epson Stylus Pro 9600 InkJet Printer

3 Answers

Epson sp9600


aha and your printer is not functioning right now isnt it, or it is still operational, either way that error must be solve or you will never use your printer. this error means that your pump motor is near end about 5% of its life is left. here is the sure solution for your prob. turn off your printer then press the left, down arrow and enter simultaneously then power on the printer. inside initialize the sponge and cleaner then turn off and on your printer. note: you will have to replace your pump cap assy. if it is already poor in cleaning otherwise your printhead will suffer.

Sep 21, 2007 | Epson Stylus Pro 9600 InkJet Printer

Not finding what you are looking for?
Epson Stylus Pro 9600 InkJet Printer Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Inky Fingers
Inky Fingers

Level 3 Expert

705 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...