Question about Lexmark X7170 All-In-One InkJet Printer

Open Question

If Lexmark ink Cartridge carrier can be replaced

The cartridge holder broke - the latch completely off. Can this be replaced and if so the cost.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Lexmark all in one 4270 won't print in black

I know your problem. I just put in new cartridges and it will print the test page, but nothing else. Did you get an answer

Posted on Sep 12, 2008

Ad
  • 1 Answer

SOURCE: Refill cartridge for lexmark X6570

please note that I am not an expert, in this field just an attorney and that is why I am putting my full disclaimer right here at the top---That i am not an expert but only speaking from experience.

Earlier this morning, I just pulled the cartridges to check the Lexmark print (X6570) cartridge numbers (41&42). When I typed these numbers in on inksell.com to retrieve the price and other information for these cartridges, they did not have any refill kits or anything of that nature for these specific cartridges.

To answer your question about why the printer is not detecting that your cartridge is full is probably because the cartridge has a chip in it that essentially disables it once the original manufacturer ink is empty. tHEY [Lexmark & Dell] do not want outside competition In other words, the printer manufacturers make the bulk of the money on selling new cartridges (for a fortune) . To make matters worse, they always seem to be half empty even though they are ‘brand-new’ ink cartridges The bottom line is that the faster you can go through a printer cartridge, they can sell many more of the cartridges that they are charging us a fortune for.

Needless to say, I am just going to go and get me another HP printer. My advice would be to check to see if ink-refill kits (see sites like inksell.com) are available for any future printers that u purchase.


Posted on Nov 08, 2008

rwandrew
  • 115 Answers

SOURCE: Lexmark x4850 ink levels won't reset with new cartridge

Hi...

Silly question, but I have done this myself. Have you removed the tape from the bottom of the cartridge?

Posted on Jan 25, 2009

  • 62 Answers

SOURCE: Lexmark X3550 ink cartridge #23 receiving error

There are a small number of #23/#24 cartridges that are not properly recognized by the printer. Lexmark has a firmware upgrade to correct this issue. The upgrade for the X3430 is available from Lexmark at:



To install the firmware upgrade,
  1. Make sure the printer is ON and connected with a USB cable.
  2. Download and run the appropriate firmware upgrade for your computer.
  3. Be sure not to disconnect or power off the printer until the upgrade is complete

When the update finishes the printer will restart and will accept the cartridges. Please contact Lexmark support if this does not fix the problem.
A similar patch is available for the X3430 and Z1420 models. See http://bit.ly/LoXxv

Posted on Jun 25, 2009

pineworks
  • 4345 Answers

SOURCE: My Lexmark X5410 Printer will not recognize a refill cartridge.

Hi there

This is the same old story with Lexmark printers, you cant do any thing about it the chips have a small fuse inside them and soon as they emty it blows the fuse, and thats it so I beleave the only way is to buy new ink, or a diferent printer.
Not know any fix for them myself sorry.

Can try.
Turn printer off. Unplug power cord and other cables. Wait 30 seconds. Plug cords and cables back in.

Also seen this on the net.
Use clear tape over left hand row of sensors on front of cartridge and re-insert. ink now shows with question mark but reads as full and prints fine.

but yeah, best bet, never ever buy lexmark.....:)

http://www.fixyourownprinter.com/forums/inkjet/35235


If that doesn't work, try disabling your ink monitoring software.
All The Best Pineworks

Posted on Feb 21, 2010

Testimonial: "Thanks for the quick response. I'll try these things...and not buy Lexmark again."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the ink cartridges on a lexmark 5495


Please follow the steps below on how to replace ink cartridge on the Lexmark X5495 printer:
  1. Make sure the printer is on.
  2. Lift the scanner unit. The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
  3. Press down on the cartridge carrier latch to raise the cartridge carrier lid.
  4. Remove the used print cartridge.
printmastert_73.jpg



Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:


1. Unplug the printer from the power source.

2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

3. Remove the used cartridges.

4. Load the new cartridges. Close the cover.

5. Plug the printer back to the power source.

Aug 14, 2011 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

How do you close front to get ink cartridge out


Please follow the steps below on how to change the cartridges on your Lexmark X5650 printer:
  1. Make sure the printer is on.
  2. Lift the scanner unit. The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
  3. Press down on the cartridge carrier latch to raise the cartridge carrier lid.
  4. Remove the used print cartridge. Note: If you are removing both cartridges, repeat step 3 and step 4 for the second cartridge.
printmastert_65.jpg

Jul 26, 2011 | Lexmark X5650 All-in-One InkJet Printer

1 Answer

Do not know how to change ink cartridge x2650


Lift the scanner unit, and then press down on the cartridge carrier latch to raise the cartridge carrier lid. The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
printmastert_41.jpg

Remove the used print cartridge. Insert your new cartridges.

Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:


1. Unplug the printer from the power source.

2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

3. Remove the used cartridges.

4. Load the new cartridges. Close the cover.

5. Plug the printer back to the power source.

Apr 28, 2011 | Lexmark C533DN InkJet Printer

2 Answers

How to change printing cartridges


Here's how to change your cartridges: 1 Make sure the printer is on. 2 Lift the scanner unit. The print cartridge carrier moves and stops at the loading position, unless the printer is busy. printmastert_25.jpg

3 Press down on the cartridge carrier latch to raise the cartridge carrier lid. printmastert_26.jpg

4 Remove the used print cartridge. Note: If you are removing both cartridges, repeat step 3 and step 4 for the second cartridge.

Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:

1. Unplug the printer from the power source.

2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

3. Remove the used cartridges.

4. Load the new cartridges. Close the cover.

5. Plug the printer back to the power source.



You may also refer to this link: How to Set Up the Lexmark X3600 or X4600 Series All-In-One





Apr 04, 2011 | Lexmark X3650 Printer

4 Answers

How to replace ink cartridge


I hope you already got your cartridge replaced. If not, here's a link to the Lexmark website on How to Install the Cartridges in the Lexmark X5150. This also applies on replacing cartridges. http://bit.ly/akqijS. Follow the instructions.
In some cases, the ink cartridge carrier won't position itself in the middle even when the printer is on and the cover is open. Just unplug the printer from the power source. With the cover open, hold the white tape in the middle inside the printer. The other end of it is connected to the carrier. Gently slide the carrier to the center. Load the cartridges. Close the cover. Plug the printer back to power source. Hope this helps.

Jun 11, 2010 | Lexmark X5150 All-In-One InkJet Printer

2 Answers

How do i eject the ink carrier?


hi there,

  1. Look at the Epson printer's LCD screen to see the ink levels for each cartridge. If your cartridge is completely empty, simply press the "Color" button. If your cartridge has a low ink level, press "Setup". Hold down the button on the upper left side of your LCD screen until the words "Replace Ink" appears, then press the "Color" button.
  2. Wait until you see the words "Open the scanner" on the LCD screen. Then lift open the printer top by pulling up on the side grips next to the scanner unit. Make sure that the scanner lid remains closed. The ink cartridge holder should move to the far right of the printer.
  3. After the cartridges have completely stopped moving, pull the cover of the ink cartridge holder up and toward you. Press in the tab of the cartridge you need to replace. Lift the cartridge straight up to pull it out of the holder.
  4. Unwrap the replacement cartridge and insert it securely into the holder. Press straight down until the cartridge snaps into place.
  5. Close the cartridge holder cover and make sure it clicks into place. Close the scanner unit and wait while the printer charges the new replacement cartridge. Wait until the word "Charging" disappears from the LCD screen before using your printer.
Do not turn off your Epson printer while the "Charging" message is still on the LCD screen because this may cause your inks to not fully charge. Turn off your printer only if there has been no response for over five minutes.
Clean up any ink spills with soap and warm water.

Replacement ink cartridge: Black (T048120); Cyan (T048220); Magenta (T048320); Yellow (T048420); Light Cyan (T048520); or Light Magenta (T048620)

Hope this initial info/idea helps.

Let me know for further instructions.

Thanks

Apr 29, 2009 | Epson Stylus RX500 All-In-One InkJet...

1 Answer

Don't know how to install ink


Installing print cartridges
1 Open the printer, and then press down on the cartridge carrier levers.
2 Remove the used print cartridge or cartridges.
3 If you are installing new print cartridges, remove the tape from the back and bottom of the color cartridge, insert the cartridge in the right carrier, and then close the color cartridge carrier lid.

Warning—Potential Damage: Do not touch the gold contact area on the back or the metal nozzles on the bottom of the cartridge.

4 If a black cartridge is included in the box contents, remove the tape from the back and bottom of the black cartridge, insert the cartridge in the left carrier, and then close the black cartridge carrier lid.

5 Close the printer, making sure to keep your hands out from underneath the scanner unit.

Removing a used print cartridge

1 Make sure the printer is on.
2 Lift the scanner unit.
The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
3 Press down on the cartridge carrier latch to raise the cartridge carrier lid.
4 Remove the used print cartridge.

Note: If you are removing both cartridges, repeat step 3 and step 4 for the second cartridge.

Apr 13, 2009 | Lexmark X4650 InkJet Printer

1 Answer

Ink


Ensure the All-In-One printer is powered on.
Lift the scanner unit
The cartridge holder will move to the center of the All-In-One
Press down on the cartridge carrier latch to raise the carrier lid.
Remove the used cartridge. NOTE: If you are removing both cartridges, repeat the preceding two steps for the second cartridge.
Remove the protective tape from the back and bottom of the new cartridge(s).
WARNING! Do not touch the gold contact area on the back or the metal nozzles on the bottom of the cartridges
Insert the new cartridges into their respective carriers.
Close the carrier lids so that they remain closed.
Close the scanner unit, taking care to keep your hands out from underneath the scanner unit as it is being closed.The control panel display will prompt you to load paper and print an alignment page. NOTE: The scanner unit must be closed before you can start a new scan, print, copy, or fax job.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe
c33ebaa.jpg






I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Mar 07, 2009 | Lexmark X5150 All-In-One InkJet Printer

2 Answers

How do I change the ink cartridge in my Lexmark x2470


How to Install or Replace the Ink Cartridges in the Lexmark i3 ID: 810 This document does not apply directly to your Lexmark X2470
  1. Make sure that plain paper is loaded in the paper tray.
  2. Ensure that the power light is on.
  3. Open the cartridge door.

    pattlnk_2112005_1715-810_cartridgeinstall1_i3_enfigs.gif

    The cartridge carrier may move slightly, and then return to the loading position.
  4. Push up on the cartridge lever.The cartridge holder springs open.

    pattlnk_2112005_1716-810_cartridgeinstall2_i3_enfigs.gif
  5. Remove the old print cartridge and dispose of it.
  6. Remove the sticker and transparent tape from the new print cartridge.

    pattlnk_2112005_1716-810_cartridgeinstall3_i3_enfigs.gif

    Warning! Do not touch the gold contact area on the print cartridge.

  7. Install the new print cartridge as illustrated below. Insert the cartridge into the carrier slot. Push the cartridge lever back to secure it under the cartridge hook. Press the cartridge lever down until it snaps into place.

    810_cartridgeinstall4_i3_enfigs.gif

    Insert the color cartridge in the front carrier slot.
    Insert the black cartridge in the back carrier slot.
  8. Close the cartridge door.
  9. On the PC, open the Lexmark i3 Solution Center and click Print Cartridges.
  10. Then click Print Cartridge Installation and follow the on-screen instructions to install the cartridges.

Please Rate the solution.

All the Best
Sammy

Sep 26, 2008 | Lexmark Office Equipment & Supplies

Not finding what you are looking for?
Lexmark X7170 All-In-One InkJet Printer Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...