Question about Televison & Video

2 Answers

My 15 month Celcus LCD423D913FHD tv will not turn on. The standby light is lit and will flicker but will not power up the tv. What is the likely problem?

My 15 month Celcus LCD423D913FHD tv will not turn on. The standby light is lit and will flicker but will not power up the tv when the start button is pressed. What is the likely problem?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 38 Answers

Go to your manual and go through the setup procedure again. If this does not resolve your issue, look up the company website or contact information in the manual. Either call for assistance, or go up to the company website and click on contact. Provide the model number of the TV and details of the issue that you are encountering. Trying to correct an issue in the public domain is cluttered with misinformation, and is less than ideal. Going directly to the manufacturer will connect you with a qualified Technician who will assuredly have the answers that you are seeking. Posted on Mar 03, 2015

Posted on Mar 04, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 76,140 Answers

Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Posted on Oct 20, 2014

  • Martin Doust
    Martin Doust Oct 21, 2014

    Thanks. That's really helpful - much appreciated.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Power issue with Olevia LT23

this is bull do...The same thing happens with my TV I Have the Olevia 23" and the power will not turn on.
$700 shot, who cares about the rebate when it works on a short while...

Posted on Nov 24, 2008

  • 1 Answer

SOURCE: Power on problem for My Syntax Olevia LCD TV 23"

I have a 24" Olevia LCD TV. Same symptoms (Stdby LED is on, press power and it flashes off, then back on). The USB cable to the Service Port also worked. But being of sound technical mind, I figured this means that the PC is supplying the +5v to the circuit. What I did was disassebled the TV, carefully disconnected all the cables, and opened it up to reveal the circuitry. I looked over the circuit and noticed the 1000uf/16v capacitor at position CS21 was failed and bulging. I removed the cap, tested it and verified that it was indeed failed. I went to a local Radio Shack and picked up a 1000uf/35v electrolytic, after all, the value is what mainly matters as long as it's not lower voltage than the original. I replaced the new CS21 capacitor back in the circuit (it is polarity sensitive, so pay attention to what the original mounting position is). I reassembled the TV and Viola! Works! No need for the USB cable to the Service Port!

I hope this helps someone!

-Matt

Posted on May 18, 2009

  • 9 Answers

SOURCE: INSIGNIA LCD won't turn on

replace 2 condensers in the power supply with greater voltage ones.original are 1000uf 35volt...use 1000uf 65volt...99cents each
power circuit is made to fail with typical tv industry tactics...the warranty is reflected by the life of their condensors (capacitors) average life is 2000 hours..
easy...huh
if your a smoker...you must clean the button cover as they get stuck on with your stupid tobacco residue. 75% of all LCD tv's that smokers own fail this way...
\tough huh?
TRY TO STOP SMOKING...

Posted on May 18, 2009

  • 197 Answers

SOURCE: will not power up fully

power supply call pioneer

Posted on Jun 07, 2009

ronaldo_ross
  • 1056 Answers

SOURCE: There was a power surge and a loud pop and now the

A job for the technician on this one. I have only worked on several flat screen before, on my last days as an electronic technicians. Half of the ones I worked on was the power supply inside ir the problem was like this. Instruction on how to fix them would require me to write many pages on electronic theory so, I am very sorry It is almost impossible for me to help you on that. Be carefull where you take that tv to. some shop can't fix those. You may have to search your local area for someone who specialize in flat sreen HDTV. Well I hope I have shed a little light on the problem. Thanx for posting the problem.

Posted on Jun 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sylvania plasma tv will not turn on


power supply board has defective components,check for swollen capacitors and replace them,if problems still not solve email me at rspoliah@gmail.com .for further instructions

Aug 14, 2014 | Sylvania 6842THG 42 in. Plasma HDTV

1 Answer

I have had my celcus tv for 18 months and it won't turn on at all not even on standby and I have changed the.fuse and nothing happens


Sounds to be as if the power supply has been damaged. Check to make sure the power cord is not damaged and the outlet you are plugging it into has power. If these two things check out to be ok I would suggest replacing the TVs power supply

Jul 01, 2014 | Televison & Video

2 Answers

What is the 'One4All' remote code for Celcus TVs?


Try these codes. If it do not help you, Try code search method.
0147 0135 0250 0257 0310 0394
Code Search Method
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Apr 05, 2012 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

Lcdx37whd88


Sounds like your power supply capacitors have failed. Google for Z1234TV and see if you can locate a power supply capacitor repair kit for your model.

Mar 31, 2012 | Televison & Video

4 Answers

Hisense tv turns on and off


STOP!

The unit has a fault on its power board and sustain board.
It turns off because the sensor is preventing some component from bacoming overheated and catching fire or damaging further components. Seel professional repair.

Please rate my help++++Thanks for using FIXYA

May 13, 2010 | Hisense TL1700 17 in. LCD Television

1 Answer

TV just turned off while watching. standby light flickering red 7


Ur power board have dead capacitors.U Know how to solders?Take the tv aparts,check these capacitors in the power board for dead capcitors like puff up or burst open.Replaced these capacitors to get power back.Or buy and replaced the whole reburbish power board at Shopjimmy.com,Ebay.com.








Jan 21, 2010 | Televison & Video

1 Answer

I bought my son a 19" philips tv model # 19pfl340d/27.in order to turn tv on it must be unplugged for 10-15 minutes.The first one I bought did the same thing and I returned it.this one is exactly the...


The remote control will not operate the TV when the TV is in the OFF mode (No LED lit on front bezel). To change the mode from OFF to STANDBY or ON, press the POWER button on the side of the TV. Once the POWER button is pressed, the LED will change to either red to indicate STANDBY or green to indicate ON, whichever mode the TV was in prior to being turned off with the TV POWER button.

By pressing the POWER button on the side of the TV, the mode will toggle from OFF to either STANDBY or ON. If the POWER button is pressed and then the LED on the bezel is red, the TV is in STANDBY mode and will need to be turned on using the remote control. If the POWER button is pressed and then the LED on the bezel is green, the TV is ON.

Nov 11, 2009 | Philips 19PFL3403D/27 19 in. LCD TV

2 Answers

Won't Turn on, standby LED lit


HI,

I am having the same problem, any solution? Thanks! -Steve

Aug 19, 2008 | Sony KP-61V80 TV

1 Answer

Flashing light - video going out


When you push Power Button on remote, TV goes to Standby state i.e its power light (LED) lit but no picture / no sound. Power button on remote has symbol looks like.. ( ! )

Aug 14, 2008 | Sony KP-53HS10 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6031 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...