Question about Makita Saws
I have dismantled the saw and the turn base is still connected to the base but I can't see how to separate them. I have removed the screw which goes through the turn base into the base. Swivel point in base turns with turn base.
If you have removed the kerf boards and the center bolt the saw will lift straight off the turn base. It is possible the aluminum is deformed a little, but it will pull straight up and off if that bolt is out
Posted on Jan 05, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hi, Thanks for getting back to me, sorry for not making it clear but it was a 2 part question. I have a LS1011N and assumed it would have an electric blade brake like mine. When the bearings are bad it doesn't take long to also wear out the brushes so the electric brake not working full time is a symptom of that failure. Since yours doesn't have a brake then you are right in half of your guess of the gears the other half would be bearings. The only way I know to tell with the thing still assembled is to hold a screwdriver to the rear of the motor case and put your ear on the handle and run the saw and listen for the sand like sound of a bad bearing. If you don't hear anything like that it has to be worn gears and for that you have to look. Good Luck, this should Fixya!
Posted on Mar 18, 2009
I have went to 3 different sites and cannot find the model number listed on them, I did look at a Ryobi saw and they indicate it is an assembly. but before I did that I would try and removing the gear from the spindle. It is possible that when it spun it put a burr in the parts and you would have to use a little extra effort to remove them I would suggest going to a repair shop and having them press them apart and see what you canfind that way. Sorry I couldn't find more for you
Posted on Aug 21, 2009
unscrew the handle in the front to change, also I would recommend going to Makitatools.com and typing on your model number to download a users manual for this tool, it would be helpful to get the most out of it.
Posted on Oct 25, 2009
if you removed the handle from the rod you would need to put a pair of pliers on it gently and remove it. or if you turn it upside down and remove the tube from sliding mechanism you can grip the rod from there and unscrew
Posted on Mar 26, 2010
Tips for a great answer:
Sep 10, 2015 | Makita Saws
Jan 03, 2015 | Makita LS1016LX1 10Inch Dual Slide...
Feb 01, 2013 | Saws
Jul 23, 2012 | Makita 10" Miter Saw LS1030N
Apr 28, 2010 | Makita 10" Dual Slide Compound Miter Saw...
Apr 14, 2010 | Makita 10" Dual Bevel Sliding Compound...
Mar 25, 2010 | Makita 10" Dual Slide Compound Miter Saw...
Oct 25, 2009 | Makita 10" Miter Saw LS1030N
Nov 19, 2008 | Makita 10" Miter Saw LS1030N
Jul 15, 2019 | Makita Saws
May 15, 2019 | Makita 12? Metal Cutting Saw # LC1230
464 people viewed this question
Usually answered in minutes!