Question about GE Dishwashers

1 Answer

My GE Potscrubber 950 left water stains last night then drained all over kitchen floor tonight. Any help? Tks

Left water or soap stains last night the tonight drained all aver kitchen floor during cycle. Any adea?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GE Master
  • 63,744 Answers

Idea might be the hose froze and busted

Posted on Jan 29, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 116 Answers

SOURCE: Leaking water on floor during drain cycle

First the source of the leak needs to be identified. pull the machine out from under the counter and remove the left side panel exposing the blue float assembly. Turn the machine on and observe the fill cycle. if water comes out anywhere on the fill mechanism then the inlet valve needs to be replaced. once the machine has filled and begun to cycle cancel the program and drain the unit. observe closly where the leak is happening. a leak during drain usually indicated a leaking drain hose.

Posted on Mar 11, 2007

  • 1 Answer

SOURCE: Tablet not fully dissolving during

How do I remove the filter on a CONCEPT II dishwasher? It is full with stuff.

Posted on Mar 30, 2008

  • 1 Answer

SOURCE: GE Potscrubber 1000 with temperature sensor GSD1000M20-Water in bottom at end of cycle

Does it sound like it is trying to drain or is it just silent?

Posted on Jul 27, 2008

ngfam1
  • 639 Answers

SOURCE: GE profile PDW7880J Soap left on dishes and soap left in dispenser

Dear friend,
ngfam at you service! happy to assist!

Sprayers or sprayer clogged and or pump weak!
Better call service

We sell appliances for 65 years and I recommend this nation wide Factory repair service!



Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!

Happy to assist you,
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF!

Posted on Aug 29, 2008

  • 1 Answer

SOURCE: GE Nautilus won't drain after Rinse Cycle

Check disposer plug. If a garbage disposer has been recently installed, it is possible the disposer drain plug was not removed. The drain plug is a plastic piece in the disposer that blocks the hole where the dishwasher hose connects. Also check the hose connected to the disposal. Mine apparently had a kink in it. When I straightened the hose the dishwasher drained at full speed (I recently had a plumber re-route a hot waterline. He must has bent the hose). Hope this helps. If not go to the GE website. That's where I found my answer.

Posted on Sep 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What is wrong with my dishwasher and how can I fix it?


Check water temp. Needs to be a minimum of 120 degrees. Check all the spray arm holes for food blockage. Look closely at the holes on the spray arm ends. Those holes act like jet engines to spin the arms.

Apr 02, 2015 | GE Dishwashers

1 Answer

My GE Potscrubber Model GSD2230Z04WW is not dissolving the soap. I have already replaced the water inlet valve.


Check your wash arms, and make sure the holes are not plugged. Also make sure they are free to turn. Next,remove the toe-kick panel, and look for leaks or signs of leakage. Sometimes (especially if your tile floor doesn't go all the way back), dishwashers will leak most of their water out and you never know it! Other simpler things is to make sure you are not blocking the soap dispenser with large pans or plates.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Feb 17, 2015 | GE Dishwashers

1 Answer

I have a GE Potscrubber dishwasher which is about 13 years old. I recently experienced a problem when I ran the dishwasher I had water leaking onto my floor. In addition, the cycle had not used all the...


Hi,
The pump seal may be the problem. There are a number of places on the net where you can get step by steps and the the parts to replace the seal. Some recommend just getting a new motor pump housing which is 150. I just purchased the impeller assembly (it has all you need) and it cost $25 with shipping. Only thing is I did not realize I also had a leak in the solenoid stem valve. Let me know if you need the link I was talking about.

Dec 08, 2010 | GE Dishwashers

1 Answer

GE Monogram bottom freezer leaking water from left side onto the freezer floor and onto hardwood floor of the kitchen . Already tried totally defrosting freezer and that did not solve problem. Help!!


ck the drain in the back of freezer . it may be pluged and when it goes into defrost cycle you get about a cup of water on the floor . if there ice on bottom of freezer then the drain is iced over . some models require a drain heater to prevent this . mm hope this helps ..

Oct 14, 2010 | GE Monogram ZICS360NR Bottom Freezer...

1 Answer

My ge potscrubber 650 is leaking onto the floor in front of the dishwasher. What is the likely problem?


On ours, the leak was on the right side, and it turned out to be a failure in the seal around the soap dispenser.

Mar 25, 2010 | GE Dishwashers

1 Answer

GE Potscrubber disher - water leaks out while filling


I would try removing the cover and make sure the float isn't sticking. On mine the float pushes on a rod that goes through the tub to a micro switch. When you hit it, it probably frees it up for a while. Hope that helps.

Jan 21, 2010 | GE Dishwashers

1 Answer

Does not cleans dishes



Hi


Thanks for using FixYa. First of all please check the Water temperature by using a thermometer inside the dishwasher to measure the water temp. It should be as close to 125 degree F to 140 degree F as possible. Now try using the temperature boost feature if your dishwasher is equipped with this cycle feature and check if this will help your wash ability issues.

Now check the Powder soap by making sure that you store your soap in a dry environment and it is not stale and clumping together. Possibly try a different detergent like a liquid or gel. Also, make sure the dishes are loaded properly, or dishwasher is not overloaded.

To check the proper filling dishwasher will fill with water up to and around the heating element. If water is more below the heating element, you may have low water pressure or a problem with the fill valve. Try & listen if it sounds like it is spraying the water around with enough pressure.

For low water pressure, try to clean the screen at the entrance of the fill valve, sometimes the fill valve can fail and not allow the proper water into the dishwasher and may need to be replaced. And, check the spray arm and pump cover for splits or leaks. Also make sure that the water is draining and is not accumulated in the dishwasher, if it is in dishwasher then check for clogged drain hoses and drain pump.

Low water fills are a very common trouble maker with today's dishwasher.

Please do rate this solution and revert for further assistance.



Thanks
Rylee


Dec 11, 2009 | GE Dishwashers

1 Answer

Promac wall unit Model # PS9OCR. Unit was left on


I would suggest you check how humid it is outisde, if it is really humid it is pulling water out of the air, the drain could be plugged also. And the filter could be plugged or the condensor may be defective or plugged.

Aug 28, 2009 | Heating & Cooling

1 Answer

GE Potscrubber 650 does not drain and top rack not washed


your not draining the washed dirty water out. its leaving crud on dishes. check drain pump and drain line for restrictions

Jun 22, 2009 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike

Level 3 Expert

4357 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...