Question about Televison & Video

1 Answer

Why cant I change channels when recrding 2 progs?

Turning tv off

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hello Anonymous,
You did not specify if you are using a DVR capable cable/satellite box, which I what I presume is the case.That DVR has two tuners in it - each tuner allowing you to watch and/or record two programs at one time and in any combination.If both of those tuners are used for recording then you cannot watch another "live" stream as there no available tuners to tune and display (or stream to the DVR hard drive for recording). You can only switch between the two recording programs.
As a side note, if your TV has a built-in tuner, you can split the cable and have one going to the DVR and the second run going to the TV set. You can then use the TV's built in tuner and watch what anything it can get. It won't get scrambled digital cable but will get analog and Clear QAM channels.

Posted on Feb 15, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i put my new cls1110 on prog 1 frequency 4


The CLS1110 is a one channel radio. However the one channel can be changed to another frequency and/or PL code. With the radio turned OFF, hold in the PTT and the MON, while turning the radio on. Continue to hold the PTT and MON until the radio stops making noise. You are then in programming mode and can use the menu button to walk through the stages of programming. Use the PTT to change the settings, and the MENU to lock it in.

Best regards.

Nov 16, 2010 | Motorola CLS 1110 (1 Channel) 2-Way Radio

1 Answer

We have not had this tv on since went over to digital freeview built in hopwever just put it on and there are no channels stored how do we get channels?


Hello

Your TV has to be initilized. It should be retuned to get the channels memorized in its memory section. Then only you can get the channels stored. Hopes that you have its remote control hanset with you. Replace two new cells in it and proceed the folloing steps. Connect ariel to its back socket before doing these.

[1] Press power button on the front panel of your tv. The initial setup screen appears.

[2] Press Ch+ on the remote control handset or on the front panel of your TV to start auto program, or Ch_ button to exit.

The initial setup screen will appear each time you switch on the tv until you perform autoprogram.
To perform autoprogram again

[1] Press Menu button.

[2] Press to highlight Channel Menu

[3] Press Pr Dn button to hilight cable. Press [+] to select.

[4] Press Prog Up or Prog Dn to hilight On or Off according to how you connected your TV. Press [+] to select.

[5] Press Prg Dn to hilight autoprogram. Press [+] to search for channels.

[6] After autoprogram finishes, press "Menu" again to exit.


TO RESET THE TV TO FACTORY SETTINGS

[1] Turn TV on.

[2] Press and keep hold the "Reset' button on the remote control hanset.

[3] Press and release the "Power button" on the TV front panel. The TV will turn itsef off.

[4] Release "Reset Button" now from your hanset.

These are the processes to be done to either autoprogram or turn it to factory settings. Ok.

Oct 20, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

I have a uniden bearcat portable and base I cant figure out how to program it


With the scanner powered ON,

1. Press [HOLD].
“HOLD” appears on the
display.
2. Press [PROG]. CH appears
and blinks to indicate that you
are in the Programming Mode.
To change the displayed frequency,
use [UP] or [DOWN]
while “CH” is blinking.
3. Press [PRIVATE]. “PRIVATE”
appears on the display.
If you want to program it into
another bank, press the
desired bank key. The lowest
open channel appears on the
display.
2 screens alternate to indicate
that open channel is available
to be programmed.
The scanner automatically
selects the lowest open
channel (000.0000) for easy
programming. If all channels
have been programmed (there
are no open channels in the
bank), channel 1 appears.
Use [UP] or [DOWN] to select
a new channel and even overwrite
old channels.
4. Press [PROG] to store the
frequency in the desired
channel.
Note: Press [BAND] to escape
from programming mode before
step 4.

Need the manual? You can download/print it here:

http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Oct 01, 2009 | Uniden BC350 Base Scanner

1 Answer

Maxim tv prog list


have you put in new codes? and is the emu turned on in menu under nagravision?

Nov 28, 2008 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Can't view all my channels on LXI series TV


For anyone with a set with this problem that is older----IT DOES NOT HAVE THAT PART OF THE CABLE BAND BUILT INTO IT--only solution is either to put a cable box to it or buy a new set.

SD TECH

Nov 20, 2008 | Televison & Video

1 Answer

Change TV channel on SAMSUNG DVD-VR350


Hello Giancarlo, You'll have to use the projectors remote for T.V. tuning. I don't think the samsung DVD remote will operate your projector or your T.V. channels, will it? If it does, You just have to switch the input button on the remote to change between T.V. and Video. I hope that helps.

Jun 02, 2017 | Samsung DVD-VR320 DVD Recorder/VCR

1 Answer

Channels not changing


Auto search button might be stuck/ jamed in cabinet. release it and Prog. buttons will be work.

Jun 12, 2008 | Televison & Video

3 Answers

Remote control codes


how do activate sharp tv to a comcast remote to change the regular channel on he tv im trying to turn to channel 3 but when i turn from the tv it skip from 2 to 5 then so on.

Feb 19, 2008 | Televison & Video

1 Answer

My dvd shows prog 200 and wont change


FIXED! LG DAT-250W INSTRUCTIONS: TURN OFF THE MAINS POWER AT THE WALL UNPLUG ANTENNA FROM THE BACK TURN POWER BACK ON AT THE WALL & START AS NORMAL IT WILL COME UP WITH "POOR SIGNAL" THEN WE FLICKED THROUGH THE CHANNELS & TURNED IT OFF AGAIN AT COMPONENT & AT THE WALL PLUG THE ANTENNA BACK IN TURN EVERYTHING BACK ON Note: **Just avoid the channel that keeps locking up** LG are aware of this issue

Sep 30, 2007 | LG Televison & Video

1 Answer

Symphonic SC3919


most likely your channels are in SAP mode, you need to set them up as stereo via the menu. Remote code should be 044. For VCR. turn TV to channel 2 or 3 then press VCR button

Sep 11, 2007 | Symphonic SC3913 13 in. Combo

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76115 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6004 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...