Question about Sharp Office Equipment & Supplies

1 Answer

Have Sharp - AR-5516 and H5 error blinking on the screen

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sharp Master
  • 6,850 Answers

1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"#" key "*" key "C" key "*" key

Main code 14 Start key Sub code 0 Start key

OR

"#" key "INTERRUPT" key "C" key "INTERRUPT"

Main code 14 Start key Sub code 0 Start key

2. Canceling the simulation mode
When the clear all key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and the
screen returns to the sub code entering display.

* After canceling the simulation mode, be sure to turn OFF/ON the
power and check the operation.

Note: If the machine is terminated by a jam error or paper empty during copying in the adjustment by the simulation, recopying is required.

DO NOT CONTINUE RESET AS THIS CAN CAUSE A FIRE AND RUIN A PERFECTLY GOOD DAY.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Posted on Jan 30, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 990 Answers

SOURCE: error code h5-01

Hello sir; the paper exit sensor get stock, just put back in the track let it moved free.

Posted on Apr 14, 2009

  • 62 Answers

SOURCE: sharp ar-m350u error code h5-01. How do I fix

vheck this link out http://www.fixya.com/support/t1570580-remove_h5_01_error_code_sharp_arm550n

Posted on Apr 15, 2009

  • 87 Answers

SOURCE: error code H5-01

HI.H5-01
it shows there is some problem in exit sensor .it is in fuser unit.may be its lever is broken .
sensor is dirty clean it
check lever home position and its movemment
check its cable
reset this code
press ,p,*,clear,*
screen will go dead press 14 ,start code will bi reset
never forget to rate the solution.MIAN AKHLAQ

Posted on May 09, 2009

  • 268 Answers

SOURCE: error code h5-01 appeared on my sharpmar-507

Check the fuser unit and make sure its installed correctly.

Posted on Dec 02, 2009

  • 1 Answer

SOURCE: sharp ar 5516 printers error h5. h4

hi,I have error code L h on my coppier sharp 5516. your help please.

Posted on Aug 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I correct error h5 on a Sharp printer AR-5620N?


This code either low voltage. otherwise paper jammed frequenty about 3 or more time. we can reset the h5 error by # interrupt C interrupt then 14 and startkey. it will be ok..

Apr 15, 2015 | Sharp Office Equipment & Supplies

2 Answers

HOW TO FIX ERROR CODE 444 BLINKING FOR SHARP AR-5516?


http://www.sharpmea.com/cps/rde/xbcr/documents/documents/om/34_ppc/AR5516-D-5520-D_OM_GB.pdf

May 20, 2014 | Sharp AR-5320 Black and White Copier

10 Answers

Sharp ar 5516 maintenance reset


sharp ar 5516 showing ( - - - ) what's the solution

Sep 02, 2012 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

ShaRP AR5516 H5-01


driver to instal printer ar-5516

Sep 28, 2011 | Sharp AR-5320 Black and White Copier

1 Answer

H5 erreur sharp AR-5516


if there is a paper jam in the fixing many times this err will be displayed. go to the service mode (C-interrupt- # - interrupt) and enter 14 and then start button.

Feb 05, 2011 | Sharp AR-5316 Advanced Digital Imager...

6 Answers

Sharp ar 5516 printers error h5. h4


hi,I have error code L h on my coppier sharp 5516. your help please.

Aug 05, 2010 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Error code H5-01


HI.H5-01
it shows there is some problem in exit sensor .it is in fuser unit.may be its lever is broken .
sensor is dirty clean it
check lever home position and its movemment
check its cable
reset this code
press ,p,*,clear,*
screen will go dead press 14 ,start code will bi reset
never forget to rate the solution.MIAN AKHLAQ

May 07, 2009 | Sharp AR-M350U Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...