Question about HP LASERJET P1006 Printer
The paper only passesby without any print. No sound as if there is evidence to be heard printing. And how to open it. Thanks in advance.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Bogus paper jam
I had the SAME problem with my printer and after hours of searching on the web I found this solution on fixyourownprinter.com and it WORKED! I cleaned the contacts of both of the ink cartridges and then popped off the cover of the optical sensor on the side of the ink cartridges (black plastic cover over sensor assembly snaps off) there is a hole in the middle of the sensor, push it in with a thumb tack or toothpick and push up on sensor assembly and it will come off the side, clean the contacts on that and reassemble..the blue sensor light should come back on and you should be back in business.
Posted on Feb 05, 2008
SOURCE: printer not printing
If this printer has the duplexor feature there is a plate just above the paper tray and the paper may be stuck in there. Pull out the paper tray and look for a sorta blue button on the top right side inside of the printer. Push that button and the duplexor tray will drop down and that is where the paper may be hiding.
Posted on Feb 15, 2008
SOURCE: Paper Jam
Just check the rollers for debris or any tiny piece of paper. Sometimes using refilled cartridges also can cause this error. Should that not work, you could try a hard reset: unplug printer from pc and mains. wait about 10-15 minutes and while holding down the power button, connect to mains and tho pc. Hopefully that should work.
Posted on May 11, 2008
SOURCE: paper jam
try this, its probably a small part of jammed paper or then theres a problem with the pickup, try cleaning it.
Load a piece of thick paper, for example photo paper and press the resume button (may be diffrent button on diffrent models) a few times to the printer picks up the paper and puts it through the machine.
Posted on Jun 03, 2009
Tips for a great answer:
Mar 13, 2015 | Office Equipment & Supplies
Aug 27, 2008 | Office Equipment & Supplies
Nov 12, 2012 | Canon PIXMA MP130 All-In-One InkJet...
Mar 07, 2011 | Xerox WorkCentre Pro 416 All-In-One Laser...
Jul 09, 2010 | Canon Office Equipment & Supplies
Feb 25, 2010 | Canon PIXMA iP3000 InkJet Photo Printer
May 22, 2009 | Brother MFC 420CN All-In-One InkJet...
Nov 26, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...
Jun 12, 2008 | Office Equipment & Supplies
52 people viewed this question
Usually answered in minutes!