- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your question is ambiguous. You state that you turn the shape without turning it. You can turn a shape keeping it in the same plane to the right or to the left (rotating it). You can flip a shape horizontally either right or left. You can flip a shape vertically either up or down. And you can spin a shape on any of its axes in opposite directions.
jack up front left on level ground ,support and chock rear wheels and set park brake ---look and check the cv axle for leaks,tears or damage -put in neutral and watch axle should turn smoothly turn steering wheel to left and rotate tire again watching axle if their is binding or grinding or studder movement than axle is damaged and needs to be replaced
This may seem daft but have you put the blades on correctly, they turn in opposite directions and the curved part should be pointing upwards! Looking from above and facing towards the front the left blade turns clockwise & the right anticlockwise (the right hand one has a left hand thread holding it on, as i now realise after hacksawing it off!!)
the bolt will turn opposite direction of your engines rotation. so if when setting the timing your manual tells you to crank your engine clockwise then you will need to rotate the bolt clockwise to remove it. you will need a huge belt wrench or a reverse socket in order to keep the engine and pulley from moving so you can crack the bolt. if the transmission is not attached to the engine at this point you may be able to use a crowbar to prevent the flywheel from turning and stop engine rotation that way. goodluck
depending on your system video card there are functions on the key board that can rotate the Screen, try CTRL+shift hold this bottons down they press the arrow keys untill your screen goes back to normal
or if the ctrl+shift does not work right click on your desktop click graphic properties or graphic options there should be an option for you LCD monitor to rotate your screen back to normal by selecting the option 0 make sure you click apply or OK after changing the settigns to make it take effect before closing the options screen.
I'll sort it out for ya!
The engine has the spark plugs
O O O O
1 23 4
and the dizzy has contacts 0 0 <- my pic of dizzy contacts
I'm no artist but this looks like a golf engine and dizzy drawing to me.....
Anyhow the dizzy looks like this 1- 0
the 4 contacts... 2- 0 3- 0
Number 1 plug is furthest left of the engine.
Number 1 plug on the dizzy is the "top" contact furthest back of the car
Number 2 on diz\zy is the LEFT most contact
Number 3 on dizzy is the Right most contact
Number 4 in dizzy is the Bottom (nearest front of the car) contact
Hope this helps -
Leave feedback good or bad.