Question about Xerox 6505/dn Workcenter 6505dn Color Laser Mfp, Print/copy/scan/fax/email, Up

1 Answer

How do I fix a printing problem where the error message load tray 1 keeps appearing?

Even though tray is loaded message appears and blocks printing until tray is opened and closed, then prints previous document and cycle starts again.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

You Really need to have this Machine Cleaned. there is too Much Paper dust On the sensor

Posted on Jun 06, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I keep getting a carriage jam error message. There doesn't appear to be a jam, but I am unable to clear the message and print anything. Also the display screen reads original loaded. No idea what this...


Check the location of the ink carriage. If a piece of paper gets wadded up under this or something else is obstucting it you will see this error.

The original loaded message comes up when a sheet of paper is in the scanner tray.

Apr 01, 2011 | HP Officejet 7210 All-In-One InkJet...

1 Answer

HP Lazer 4300dtn keeps trying to print from tray 1. How can I set the default to tray 2?


Selecting which tray is used for printing

You can select how the printer pulls paper from the trays.

Understanding tray order

When the printer receives a print job, it selects the tray by trying to match the requested paper

type and size with what has been loaded in the trays. Using an "autoselect" process, it searches

all available trays for the paper that satisfies the request, starting with the bottom tray and ending

with the top tray (tray 1). The printer begins printing the job as soon as it finds the proper type/

size.

Note The "autoselect" process occurs only if no specific tray is requested for the job. If a specific tray

is requested, the job prints from the requested tray.

 If paper is loaded in tray 1 and tray 1 is set TRAY 1 TYPE=ANY and TRAY 1 SIZE=ANY on the

Paper Handling menu, the printer will always pull paper from tray 1 first. See "Customizing

tray 1 operation" on page 47 for more information.

 If the search fails, a message appears on the printer control panel display requesting that

you load the correct paper type/size. You can load that paper type/size, or you can override

the request by selecting a different type/size at the printer control panel.

 If a tray runs out of paper during a print job, the printer automatically switches to any tray that

contains the same paper type/size.

The autoselect process changes somewhat if you customize tray 1 operation (as explained in

"Customizing tray 1 operation" on page 47) or set tray 1 for manual feed (as explained in
"Manually feeding paper from tray 1" on page 49). See if this works. Good luck !

Jan 08, 2011 | Computers & Internet

1 Answer

My OKI C5500 will only print from the MP tray, and will not take paper from the bottom paper tray, even though there is plenty of paper in the bottom tray. Its giving me a 490 Error message, but I do NOT...


490 error means -

LOAD mmm AND PRESS ONLINE SWITCH 490: MP TRAY EMPTY

Print job from MP Tray has been received and the MP Tray is empty.

Load the requested media (mmm) in the MP Tray and press ON-LINE.

Check your print driver settings and see if your defualt try is set for the MP Tray. Also see if the page setup for the print job is set for MP tray.

Feb 17, 2010 | OKI C5500n Printer

1 Answer

Not printing black


To align the printer from the control panel

1. Load letter, A4, or legal unused plain white paper into the input tray.
2. Press Setup.
The Setup menu appears.
3. Press to highlight Tools, and press OK.
The Tools menu appears.
4. Press to highlight Align Printer, and press OK.
5. The HP All-in-One prints a test page, aligns the print head, and calibrates the printer.

Recycle or discard the page.

A success or failure message appears.

Note If you have colored paper loaded in the input tray when you align the printer, the alignment will fail. Load unused plain white paper into the input tray, and then try the alignment again.If the alignment fails again, you might have a defective sensor or ink
cartridge.

6. Press OK to continue.
7. Recycle or discard the page.

Oct 13, 2009 | HP Photosmart C7280 Laser Printer

1 Answer

Bulk feeder keeps jamming


It might be the tray Feeder not placed properly or the printer needs a service if not done in the last six months. Contact to your nearby Repair shop and Service centre.

Thanks
Scott

Feb 06, 2009 | Kyocera FS-4000DN Laser Printer

2 Answers

Error message on 4050n printer "manually feed hp tough letter"


What error message is on the display?

To solve one common problem, try this: Take out the paper tray. Slide the blue fence at the back away from the paper (toward the back of the tray) then slide it back to the correct position for the size of the paper. Replace the paper tray and see if the error message still appears.

Jan 20, 2009 | HP LaserJet 4050n Printer

1 Answer

Print job will not print from the manually feed tray unless I select the Go button for it to process


Table 3-7. Paper Handling Menu
Item Values Explanation
ENVELOPE FEEDER
SIZE=COM10
For supported paper sizes
see page 1-12.
This item appears only when the
optional envelope feeder is installed.
Set the value to correspond with the
envelope size currently loaded in the
envelope feeder.
ENVELOPE FEEDER
TYPE=PLAIN
For supported paper types
see page 1-12.
This item appears only when the
optional envelope feeder is installed.
Set the value to correspond with the
envelope type currently loaded in the
envelope feeder.
TRAY 1 MODE=
FIRST
FIRST
CASSETTE
Determine how the printer will use
Tray 1.
FIRST: If paper is loaded in Tray 1,
the printer will pull paper from that
tray first.
CASSETTE: A paper size must be
assigned to Tray 1 using the
TRAY 1 SIZE option (the next item
in this menu when TRAY 1
MODE=CASSETTE). This allows Tray 1
to be used as a reserved tray.
TRAY 1 SIZE=
LETTER
For supported paper sizes
see page 1-12.
This item appears only when TRAY 1
MODE= CASSETTE. Set the value to
correspond with the paper size
currently

Mar 12, 2008 | HP LaserJet 4350 Printer

4 Answers

Tray 1- load plain letter


Linda,

On printer check media/paper type tray 2 or 3 is plain and tray 2/3 is set for letter paper size too, via printer control panel. Also check under paper handling other options for tray 1, also on tray 2 and 3, I think there is a blue little round switch on left should be set as letter not custom.

Some paper types cannot be feed from anywhere else but tray1/bypass ie labels/laminate/card stock.

Check print driver on pc has tray 3 option installed and is not set as default to print to manual bypass/tray 1

light flashing cause printer wants paper type/size that it "thinks" it hasn't got in tray 2/3

If that dont cover it...post back

Soulvisitor :-)

Dec 18, 2007 | HP LaserJet 4100n Printer

2 Answers

Out of Paper. Load Paper Error


Check
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00265823&cc=nz&lc=en&dlc=en&product=422000&dlc=en&lang=en

"
s.gif
HP PSC 1600 and 2350 Series - Paper Jam or Paper Feed Problems"

When the all-in-one detects a paper jam, the following message appears: Paper jam: Press OK to continue . The computer might display the following message: There is a paper jam (or misfeed). Clear the jam and press the Enter, Resume or OK button on the HP PSC. This document will assist in correcting paper-feed problems such as paper jamming, print slanting, and multiple pages feeding into the all-in-one. s.gif Clearing paper jams

Jul 28, 2006 | HP PSC 2355 All-In-One InkJet Printer

Not finding what you are looking for?
Xerox 6505/dn Workcenter 6505dn Color Laser Mfp, Print/copy/scan/fax/email, Up Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Philip Hughes

Level 2 Expert

80 Answers

docukaaf

Level 1 Expert

36 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...