Question about Motorola Radio Communications
In dock red lights aren't working. My walkie talkies aren't opening
Here's a link to the user guide. Not certain if you are unable to open the battery doors on the radio, or if the work "opening" is intended to be something else. Repost if problem persists.
Posted on Apr 12, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You will find the manual here. The radio is part of the 280 series radios, so there is a general manual on all in that series.
Posted on Jan 09, 2008
SOURCE: Motorola FV200 Walkie-Talkie
Use scanning to monitor channels for transmissions or to find someone
in your group who has accidentally changed channels.
1. Short press MENU until the "Z" appears. The current setting
On/Off will flash.
2. Press either + or – to turn On or Off.
3. Press the PTT to confirm or MENU to continue set up.
Here is a link to the manual http://www.motorola.com/mdirect/manuals/FV200_userguide.pdf
Posted on Oct 23, 2008
SOURCE: motorola walkie talkie t4508
This one should be a very close match. The T4508 is a foreign version of the T4500.
Posted on Jan 07, 2009
SOURCE: charging walkie talkies
This is more for "mshtexas" than the OP but I'm sure there may be others out there wondering the same thing. The power cord that comes with this unit has a 9.0v output at 200mA with the center pin being positive
Posted on Jul 01, 2009
Try programming the radios without an eliminator code and see if they work together then. If so, there is something wrong with the eliminator code portion of the radio. Also, check your batteries, switch batteries between the units and see if the problem moves to the other unit. It takes more energy to transmit than receive, so a bad or very weak battery could exhibit a similar problem. The radio icon will illuminate whenever a radio is transmitting or receiving. When the radio is in standby mode, the icon should not be shown. Your radio with the icon on all the time may be stuck in transmit. Check your PTT button to see if it is slightly stuck or depressed. Here's a link to the user guide http://www.motorola.com/web/Business/Products/Two-Way%20Radios%20-%20Unlicensed/_Documents/XTR446/Static%20Files/XTR%20Manual%20EU.pdf?localeId=103
Posted on Jun 26, 2012
Tips for a great answer:
Apr 29, 2018 | Radio Communications
Sep 18, 2015 | Motorola Radio Communications
Feb 16, 2015 | Walkie Talkies Radio Communications
Sep 28, 2014 | Motorola Walkie Talkies 2-Way Radio
May 25, 2011 | Motorola Walkie Talkie 2-Way Radio
Jan 11, 2011 | Motorola Walkie Talkie 2-Way Radio
Oct 05, 2009 | Motorola Walkie Talkie 2-Way Radio
264 people viewed this question
Usually answered in minutes!