- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
CLICK HERE to download 4.3.1 IPSW files and other earlier versions. Select it from the dropdown menu.
You can also try locating it locally on your computer. For Mac, go to: Users>HOME FOLDER>Library>iTunes>iPhone Software Updates>
For Windows, go to: C>Documents and Settings>HOME FOLDER>Application Data>Apple Computer>iTunes>iPhone Software Updates>
NOTE (For PC users): Application Data is a hidden folder, make sure to set hidden files visible from Control Panel>Folder Options>View>
WARNING: The following basebands are still UNLOCKABLE. DO NOT UPDATE to iOS 4.3.1 (or higher) if you need the unlock:
05.14.02 - iPhone 3G & 3GS, iOS 4.1
05.15.04 - iPhone 3G & 3GS, iOS 4.2.1
05.16.00 - iPhone 3GS, iOS 4.3 and 4.3.1
05.16.02 - iPhone 3GS, iOS 4.3.2
03.10.01 - iPhone 4, iOS 4.2.1
04.10.01 - iPhone 4, iOS 4.3 and 4.3.1
Update iTunes to 10.2.1 for best results.
Plug your iDevice to your computer
Turn OFF your iDeviceTo turn OFF, press and hold the POWER button for about 3 to 5 seconds then slide the red bar on top of your iDevice's screen saying "slide to power off"
Open/Run redsn0w and click BrowseNOTE: The screenshots you'll see here are taken from a Mac and earlier version of redsn0w, however, the process is completely the same if you'll be working on a PC (Windows) or a newer version of redsn0w.
Locate the official IPSW.Use the following:4.3.2 IPSW if you have iOS 4.3.2 on your iDevice4.3.1 IPSW if you have iOS 4.3.1 on your iDevice4.2.1 IPSW if you have iOS 4.2.1 on your iDevice
redsn0w will process and identify the IPSW
Click Next and let redsn0w do what it have to do
Check on Install Cydia and click NextClick image for larger view.
Turn OFF your iDevice (just a reminder from step 2). Before you click Next, read steps 9 to 11 first in preparation for putting your iDevice to DFU mode
Press and hold the POWER button for three (3) seconds
Continue holding down the POWER button then press and hold the HOME button as well. Hold them both for another ten (10) seconds
Release the POWER button but keep holding the HOME button
You can release the HOME button once you see redsn0w in the process of jailbreaking your iDevice
Click Finish and you're done on the computer, and as it says, the rest takes place on your iDevice.
All you need to do now is wait and keep it plugged in your computer. DO NOT INTERRUPT!
Once complete, you will find Cydia on the 2nd page of your iDevice's homescreen and it should operate as usual.
If you have an iPhone and you're able to preserve your baseband, you can CLICK HERE to UNLOCK.
Wii SoftMod Guide 3.1 - 4.1 Before we start into the process, you will need an SD card, at most 2gb capacity. This SD card will need to be formatted into FAT32 format.
Note: If you are on Wii System Firware 3.1, 3.3 or 3.4 You need to be connected to the Internet, unless you know the proper steps to upgrade using the Wii System WAD and Firware Updater 4.1 which I may include later.
1. Put all the files from ‘Wii SoftMod 3.1 - 4.1.rar’ onto the root of the SD Card. 2. Insert the SD card into Wii. 3. Go to Wii Options, then go to Data Management > Channels > SD Card, then you will get a message saying "Load boot.elf?" , select 'Yes' and the Hackmii installer will run. (Goto the Channels first, then insert card or your console might freeze) 4. Install Bootmii as boot2 if you can, if not then install it as an IOS then go back and install the Homebrew Channel.
Step 2. Install Recommended CIOS
1. Go to Homebrew channel and run Trucha Bug Restorer, load IOS36, press 1, read the warnings then select 'downgrade IOS15', select to load IOS from SD card then let it do its job, keep an eye on what it is doing and make sure you select 'load from sd card' when it asks & don't get any errors. 2. Run Trucha Bug Restorer again, this time select to load IOS15 on first screen using dpad left/right, then select the IOS36 menu & install patched (select 'yes' on all 3 patches) IOS36 to slot 36, again using IOS from SD card. 3. Run Trucha Bug Restorer again, load IOS36 and this time select restore IOS15. 4. Run cIOS38 r14 installer, select IOS36 as the one it should use and then select wad install. 5. If your Homebrew Channel flips upside down then continue with the guide and when completed reinstall the homebrew channel.
Step 3. Update System Menu (Only for 3.1, 3.3 or 3.4 Firmware) Note: Internet Connection needed
1. Before you update to 4.1 make sure you have at least 250 blocks free or you will brick, install IOS60-patched first with Wad Manager using IOS249, then run Firmware Updater 4.1.
Step 4. The Final Step
1. Go to the Homebrew Channel and run Wad Manager 1.4 and load IOS249 (Default) and SD card. 2. Instal the following IOS.