Question about Motorola Radio Communications
Trade batteries with a known good unit and see if it solves the problem. If not, your radio has an internal problem and needs replaced. Here's a link to the user guide page.
Posted on Apr 12, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Motorola T5950 led screen
Typically a blank screen indicates you are using a bad or defective battery. Try the battery of another radio in this unit and see if the problem still exists. There is no function to shut off the display screen, so it is apparent you have either a battery or radio problem. Here is a copy of the user manual: http://www.giantintl.com/ContentManage/manuals/Moto/T59xx_User_Manual_E.pdf
Posted on Apr 08, 2009
Here is a link to the user manual for the SV600R. http://www.giantintl.com/ContentManage/manuals/Moto/SX600%2012-21-07.pdf Follow the instructions to reprogram the affected radio. Note: The problem you are describing may not be simply programming. The radio problem may be non-reversible. You might also try a new battery, or switch the battery from the other unit for a test, just to see if the battery is bad.
Posted on Jun 08, 2009
Remove the battery and reinsert it to reset the radio. Also, check to see if any buttons are depressed or stuck. If these are not the cause, you might have a bad radio. (Sorry)
Posted on Jun 10, 2009
The Visar has a channel lock feature. If you hold down the two channel buttons at the same time, it will do one of two things depending on the settings. Either the channel will lock, or the channel numbers in the LCD will flip.
If you press the channel button and the "popples" "pop" (for lack of a better word) then the channel selection buttons re most likely OK. To fix it you just press both channel buttons at the same time for about 5 seconds. It will beep and you should be able to change the channels. If not, then it needs to be repaired.
Posted on Mar 29, 2010
SOURCE: Ok i baought 2 Motorola MJ270R walkie talkies, Then i found 1 more with no charger or anything at my moms house, And there all the exact same walkie talkies there all MJ270R Walkie talkies, And was w
Tis a problem you have there, however I would advise you take one of your radios to radioshack or similar store, and the folk there should be able to assist in finding the apropriate chargers for you.
I hope this helps you in your quest.
Posted on Mar 10, 2013
Tips for a great answer:
Jul 10, 2016 | Motorola MJ270R Two Way Radio
Jan 13, 2014 | Motorola MJ270R Two Way Radio
Aug 21, 2013 | Motorola CP200 Two Way Radio
Mar 08, 2013 | Motorola Walkie Talkie 2-Way Radio
Oct 24, 2012 | Motorola MJ270R Talkabout 2-Way Radios...
Sep 24, 2012 | Motorola Radio Communications
Sep 08, 2012 | Motorola MJ270R Talkabout Two-Way Walkie...
Jan 24, 2012 | Motorola MJ270R Two Way Radio
325 people viewed this question
Usually answered in minutes!