Question about Kenmore Sewing Machines

1 Answer

My sewing machine kenmore

It is sewing backward how can i make it sew forward

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Is your machine battery operated? If so, make sure the polarity is correct. If not, take apart the sewing machine and make sure the polarity is correct.Hope I helped!

~Conner

Posted on Nov 28, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
RickE1
  • 202 Answers

SOURCE: backward stitching

Knowing which kind of machine you have helps alot. Just guessing but maybe the reverse mechanism is stuck and needs some oil in it to free it up. Or the buttonhole mechanism is stuck in reverse part of it.
Probably you should have it looked at.

Posted on Jan 11, 2009

  • 323 Answers

SOURCE: can't tighten clutch on Kenmore zig zag sewing machine.

The clutch has fallen off the shaft. Remove the very small screw in the clutch release screw to remove the clutch release. Place the clutch(round thing with ears on it) back on the shaft with the center ears pointing towards the outside. Put the clutch release screw back on. Tighten it to make sure it works
properly. Put the small screw back in the clutch release screw and test it again. If it will not tighten or release properly, remove the clutch ,rotate it180 degrees and try it again.This should solve your problem.
sewman7

Posted on Feb 16, 2009

  • 188 Answers

SOURCE: needle stuck in right position, will only sew tiny,tiny stitches

oil it. down the shaft if you can get to it. and where ever there is a hole it always helps.

Posted on Mar 26, 2009

radiohead68
  • 2 Answers

SOURCE: serger

As long as this is a sewing machine and not a serger, I don't know about them. I only tinker on my own. Remove the bottom. There is a rod running along the length of the machine. it needs to be turned 180 degrees. You may need to retime the machine.

Posted on May 29, 2009

  • 52 Answers

SOURCE: Viking sewing machine model 6430 will only sew backwards

Th cam stack gears have gummed up on you you can try getting the back cover off along with the side and soaking the machine down with wd-40 and running it while forcing the reverse button in and out if it breaks free try and soak up as much of the wd-40 as you can and then oil anything that moves. I know this may be discouraging but viking no longer supports this machine and you might be better off taking it to an older viking dealer for help.

Posted on Jul 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My machine will not sew in the forward position...It keeps sewing backwards like it is in reverse.....Need help ASAP


All sewing machines have a gear lever. This is so you can sew a seam forwards and backwards. Consult your manual.

May 03, 2016 | Sewing Machines

1 Answer

Machine will only sew in reverse


You wrote,
"Machine will only sew in reverse - Sewing Machines" A: I'm just a tinkerer, hobbyist, who did run across this same problem before. I can give a general non-model specific remedy based on my limited experience with mechanical sewing machines that get locked into sewing backwards, that is "they only want to sew in Reverse":

1. Verify what is the normal direction of the fly wheel in forward sewing for your machine. Most sewing machines, including Singers, always sew with the top of the flywheel moving toward the operator, regardless if sewing forward or backwards; but older friction-wheel White Rotary (RF) sewing machines, have the flywheel running in the opposite direction (top of Hand-Wheel turning away from the operator when sewing.

2. If it has Reverse Lever/Switch; check that it is in the correct position; if still only sews in reverse, change positions of the Direction Control lever (or Button, etc.), and see if it changes direction to correct the problem.

3. If this does not help, then jiggle the Reverse Lever and follow the linkage inside the machine and see if there is anything broken, loose or out of adjustment. Some machines have reverse control linkage elbows in the top part of machine, and by poor design are prone to accidentally pop backwards, causing sewing in the opposite direction of the position of the Reverse Lever/Button (Backwards when you want to sew Forward). On occasion, a Kenmore 158.1787180 got locked into the backwards sewing mode (the dog-gone' est thing), but by following and analyzing the linkage, I found where it was going wrong, and popped the indecisive linkage elbow back the way it was supposed to be and fixed it. [ I had more detailed notes, on this fix, but when I read them, without the machine in front of me, made no sense to me today so I can't share that till I revisit the conundrum again.]

4. If all else fails, you may be able to hold or clamp the Reverse Lever/Button in the Reverse position, so it sews Forward (I've done this before too (as a short-term fix) until I figured out how to adjust it back the way it was supposed to be.

5. If this post helped you, don't be afraid to indicate so, so Fixya will know. If it was useless, "ouch", but I'd like to know that too, so I'll be more selective on what I really know more about. I try to help, though this is probably a trade secret that anyone who knows is discrete about who they share the information with.
Sincerely
-- Amender. (2016 FEB 24)

Feb 06, 2016 | Sewing Machines

1 Answer

The Feeder Dogs are not moving forward or backwards on my sewing machine.


Are the Feed Dogs dropped? Check your manual for the location of the switch. .... otherwise your mechanism has been compromised. Take it in for repair.

Mar 19, 2013 | Kenmore Sewing Machines

1 Answer

Sewing backwards


try adjusting the top thread tension for the loops
try changing the needle
and see if that help any if not then take the machine back and
tell them what the machine is doing
if the machine was adjusted, then they should have checked the
stitches to make sure that the stitches were normal both forward
and backwards.

Jan 05, 2013 | Janome 1600P-DB Mechanical Sewing Machine

1 Answer

My kenmore mini ultra sewing machine is stuck won't go forward or backwards. how to fix it.?


Take out the bobbin and bobbin case and make sure there is no thread stuck round the raceway

Apr 24, 2010 | Kenmore 11206 / 11306 / 11506 / 11606

2 Answers

Machine sews only in reverse


Be sure you are in the correct stitch pattern...if you are on a buttonhole stitch or a stretch stitch it normal for the machine to sew backwards. Be sure your length is to the right of 0 and not in a strtch stitch model or buttonhole mode.

Bonnie

Jul 28, 2008 | Kenmore 15218 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Kelley Buchanan
Kelley Buchanan

Level 2 Expert

130 Answers

Irene Tulloch

Level 2 Expert

494 Answers

Are you a Kenmore Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...