Question about 3M Filtrete 7-day Digital Programmable Thermostat

1 Answer

How do set temperature target. Its set at 68 now and cannot change it. We just moved in and have no instructions

Seems that all thetemperaturesounds has been set for all the times of the day and can't get it to change.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 822 Answers

To set the temperature and by pass the program feature press "HOLD" This feature is alternate action each time you press it changes from on or off, off to on.


This will make your 3M-22 act like a non-progammable thermostat. It will hold the target temperature you set indefinitely, until you turn HOLD off. Take care using the HOLD function as the program is now bypassed. To set a hold target temperature, press HOLD and use the +/- buttons to select your hold temperature. The HOLD icon will display on the HOME screen indicating you have changed the Target Temperature. The system will HOLD this temperature until you return to the manual screen. To turn off hold press HOLD again. HOLD is also canceled when you set the mode to OFF.

http://www.radiothermostat.com/filtrete/guides/3M-22-Operation-10may10.pdf

These things are like the old VHS tapes to program.

Hope this has helped?
How do set temperature target. Its set at 68 now a - 26049973-gmetzlbygkf20izcnwtcwtjv-4-0.jpg

Posted on Jan 12, 2016

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY DOES MY FURNACE SHUT OFF BEFORE REACHING TEMP


Hi Demetrio
Furnaces turn on and off based on what they're told by your thermostat. The thermostat, in turn, will control the furnace based on:
  1. The temperature AT the thermostat.
  2. What the internal heat sensor thinks the temperature of the air is.
So, if your idea of 68 degrees is what the thermostat thinks is 71 degrees (thermostat reads three degrees high), then when the air by the thermostat gets to about 65 degrees (by your account), it'll think it's 68 degrees and shut the furnace off.

Also, if the thermostat is, say, near a source of local heat, like a lamp, a big piece of electronics, a fireplace, or that place that you habitually set down your coffee, then the air right next to the thermostat may be warmer than the rest of the room, and fool it into thinking it's at it's target.

The sensor is usually inside the housing for the thermostat. If it hasn't been dusted in a while, then it can be hard for air to get inside to affect the sensor, though this would generally cause it to lag on readouts and run the temperature higher than you wanted.

If you have a digital readout, and the system is saying , hey, target is 68, and the readout gets to 66 and the system cuts off the furnace.... my only other guess is that the unit may have features that are trying to prevent overshoot - i.e. by the time the temp at the thermostat actually gets to 68, most of the room is more like 73. That'd depend on your particular thermostat. At that point, you may want to call customer service with the manufacturer and tell them the issue. There may be ways to adjust the unit to get behavior closer to what you seek.

Good Luck!

DH

Jan 25, 2016 | Heating & Cooling

2 Answers

Faint picture screen


Press the reset switch to reset the garmin, is the backlight turned off in the settings or is it possibly faulty?

Oct 27, 2008 | Garmin StreetPilot c530 GPS Receiver

1 Answer

Changed distributor now timing seems off


sure it will , setting a dizzy takes following every step in the FSM
changed, that mean new dizzy?
if not, match marking parts, puts the back right every time.
but not a new dizzy that takes a new timing, setup.
look in olden days, even carbs.
setting the static, timing.
read the FSM.
here it is for free
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

Feb 06, 2014 | 1998 Jeep Grand Cherokee

1 Answer

Remote is inaccurate


did you change the batteries ?

Dec 07, 2013 | Mitsubishi Heating & Cooling

1 Answer

Have a new ULTRonic Global clock. Came in a box, well packed but apparently no setup instructions. Have been able to set the clock after much guess work. Temperature, Humidity and trend seem to work....


This is for Ultronic LCD clock/weather gadget.

keywords (from display)
Ultronic forecast week day humidity temperature trend comfort level
- DOWN = toggles F/C temp
- UP = toggles alarm
- MODE = selects date/time display
- hold down MODE to enter "set" mode for data currently displayed
- use momentary MODE to choose target item
- use UP/DOWN to change item

Nov 01, 2011 | Watches

1 Answer

I have aMicromark MM9533 7day electronic timer (could be quite old), but cannot set it because I have lost my instructions. I can set the time ok, but when I try to set each day's on/off times, it...


There are eight timer on/off events, you set each of the on and off time pairs for a particular day of the week or combination of days. If it is that old, mine was bought in 1999 and just rediscovered, you should change the button battery found under the screw panel. The timer doesn't work the way you seem to be describing.

Sep 02, 2011 | Vacuums

1 Answer

I just got a new heating unit installed. However it runs constantly. If the target temp is 68 degrees it will hit 68 degrees and just keep running. It does the same at 63 degrees. Is this normal?


Dear friend! Any thermostat, it's calibrating to cut off at the end of 2nd beginning and cut in 2nd ending of temp.
Ex: In heat mode, If you set @ 68 degree, it will cut off 70 degree beginning and cut in at the end of 66 degree.
Hope it's helpful to you?

Jan 10, 2011 | Intertherm Heating & Cooling

Not finding what you are looking for?
3M Filtrete 7-day Digital Programmable Thermostat Logo

803 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3M Computers & Internet Experts

Raj Patel

Level 3 Expert

1041 Answers

Tom Chichester

Level 3 Expert

54195 Answers

james laughton
james laughton

Level 3 Expert

2195 Answers

Are you a 3M Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...