Question about Wecheer Power Carving Kit

Open Question

My Wechee reciprocating carver which attached to a Dremel by an extention shaft is leaking black goo between the colette and blade

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my reciprocating carver leaking black goo?


Terri, this is grease leaking from seal on col-let shaft, or loose bolts/cracked casing. Take apart and repack gears and housing with lithium grease ( do not over pack) and change seal if possible.
My old sawzall from the 1980 has started to leak
sawsall leaking grease
http://www.shopfloortalk.com/forums/showthread.php?t=24494

Feb 24, 2016 | Saws

1 Answer

How do I remove blade that's broken off in a Skil 9216 reciprocating saw?


Turn the release as far as it will go, then tap on something blade down till it emerges.

Aug 03, 2014 | Skil 9216-01 9.0 Amp Variable Speed...

1 Answer

Blade doesn't move (reciprocate)


The drive shaft for the blade is stripped or broken. take it back where you bought it.

Oct 31, 2012 | Dewalt DW303 Heavy Duty 65 Amp...

1 Answer

Attatching dremel blade


You can't attach this to a Dremel Stylus. This blade is specifically for the Multi-Max tool. A link is below.

http://www.dremel.com/en-us/Tools/Pages/CategoryProducts.aspx?catid=2094

Oct 21, 2012 | Dremel Multi-Max MM462- 1 3/8 inch BiMetal...

1 Answer

I need directions on how to change the baldes on a reciprocating saw.


There are 2 types of clamps that hold the blade in that type of saw.

Since this one most likely has the type where the blade is held in place with a set screw and a "U" shaped piece of metal that holds the blade tight against the shaft. There should be a screw hole in the shaft of the saw. The blade rest next to the shaft and then the metal piece clamps the blade against the shaft. This is all held in place by a set screw that screws into the shaft. This screw uses a hex key to remove and tighten it.

If your tool doesn't have this style then it should have a twisting clamp. This will rotate and release the blade. Sometimes a pliers is needed to loosen the collar, but not to tight tho.

Jun 30, 2011 | Skil 921502 85 Amp Reciprocating Saw

1 Answer

How do i intall a blade on a DW303 Reciprocating saw?


To install blade into saw:
1. Loosen set screw.
2. Insert blade shank from the front between the reciprocating shaft and the blade clamp.
Locate hole in blade over pin on reciprocating shaft.
3. Tighten set screw. If the blade should break off and the shank does not come out of the clamp,
be sure the set screw is loose and eject the shank with a nail or pointed object.

May 05, 2011 | Dewalt DW310K Heavy Duty Reciprocating Saw...

1 Answer

The pot metal in front of thequick release tension lever has broken and fell out. can I still use the saw If not where do I go to get another one 1830 120v 18inch scroll saw dremel


I believe the part you are looking for is called a "locking rod" dremel part number 2610922661, this is the black painted pot metal that is about 3" long attached to the upper arm rocker with a parallel pin, and the flip clamp (blade tensioning assembly) or it could be the small piece attached to the tension assembly that the blade attaches to which is silver and called the "blade holder assembly-top" part number 2610922683. I would recommend ordering both directly from Dremel CS 1-800-437-3635. I broke the locking rod on mine. I emailed dremel, and they emailed me back the next morning with a schematic, and parts list. I bought 2 and paid $10.41 total.

Mar 08, 2011 | Dremel 1830 120V 18" Scroll Saw

1 Answer

How do I attach tools to my Dremel?


hello. You loosen the arbor at the base of the shaft closest to the tool. There is a tiny wrench in the kit that came with the dremel, or you can use a pair of pliers to loosen it. Joe

Apr 17, 2010 | Dremel Variable - Speed Multipro Rotary...

1 Answer

Flex shaft attachment


Takes an adapter to screw onto the nose of the Dremel. The shaft itself is gripped by the correct size collet tightened as you would any bit.

Mar 02, 2010 | Dremel 225 Multipro Flex - Shaft...

Not finding what you are looking for?
Wecheer Power Carving Kit Logo

Related Topics:

800 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wecheer Renewable Energy Experts

Greg Scott
Greg Scott

Level 2 Expert

116 Answers

Brian Lee

Level 2 Expert

110 Answers

Howie Snyder
Howie Snyder

Level 2 Expert

375 Answers

Are you a Wecheer Renewable Energy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...