Question about Brother DCP Office Equipment & Supplies

Open Question

HPW TO FIX CLOSE INK COVER - DCP Brother Office Equipment & Supplies

Posted by on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
nicarta

Nicholas Enyika

  • 506 Answers

SOURCE: " please close ink cover" what is this mean? i'm

This could be that;
The Ink cartridge door is open
The Ink cartridge door sensor is faulty/bad
Something is block the ink cartridge door sensor or the notch that deactives the sensor is broken.

Checkout the door and locate the sensor and manually deactivate the sensor ti confirm the sensor is still working ok. Replace faulty unit approprately.

Posted on Oct 27, 2010

Ad

hilongos

  • 1 Answer

SOURCE: " please close ink cover"

The cover for the Ink cartirdges has a switch on it. Try opening the cover, then close it again, the switch may be jammed. Try repeating several times if it does not do anything. If it is still the same case, then someting from the inside of the printer has caused the failure.

Posted on Jan 13, 2011

a_redbutterf

a_redbutterf

  • 1 Answer

SOURCE: " please close ink cover"

might be not properly covered or maybe your printer ink cover sensor cannot detect the ink cover. If you are using an external ink and cannot close the ink cover.....just make sure that the "hook like thingy" was properly positioned underneath the ink cover sensor =) good luck =)

Posted on Jan 19, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my printer always said cover is open and close ink cover but the ink cover is close and the ink is full?


Hi, Try taking out all cartridges, unplug the printer a few minutes.
re plug , turn on. with ink cover open. then close cover and wait to follow the install prompts, This should reset the printer.
be sure to gently push the cartridges till each one clicks.Close cover.
Please let me know if this helps!

Feb 19, 2015 | Brother MFC 420CN All-In-One InkJet...

1 Answer

Hpw do you fix the windows not working?


have you checked the fuses , fuse box drivers side , lid/cover will give the listings , see your owners manual

Jun 19, 2014 | 2010 Toyota Camry SE

1 Answer

How do I fix the "Close Ink Cover" on a Brother DCP-J125 multifunctional with continuous ink system?


Make sure that the "ink switching" is pressed by cis tank when installing the tank.

Jan 14, 2013 | Office Equipment & Supplies

1 Answer

Its showing "close ink cover"


Hi there!
The message "Close Ink Cover" means that the cartridge door is not closed securely.
-please open the ink cartridge cover and make sure all cartridges are installed correctly and then close the cartridge cover. That should clear the message on the screen.
Hope this helps!

May 08, 2011 | Brother DCP 165C Compact Color Inkjet...

1 Answer

" please close ink cover"


The cover for the Ink cartirdges has a switch on it. Try opening the cover, then close it again, the switch may be jammed. Try repeating several times if it does not do anything. If it is still the same case, then someting from the inside of the printer has caused the failure.

Dec 28, 2010 | Brother DCP 165C Compact Color Inkjet...

1 Answer

" please close ink cover" what is this mean? i'm


This could be that;
The Ink cartridge door is open
The Ink cartridge door sensor is faulty/bad
Something is block the ink cartridge door sensor or the notch that deactives the sensor is broken.

Checkout the door and locate the sensor and manually deactivate the sensor ti confirm the sensor is still working ok. Replace faulty unit approprately.

Oct 27, 2010 | Brother Office Equipment & Supplies

1 Answer

STATES THAT TO CLOSE TOP COVER TO CONTINUE


1. The top cover hinges are not connected to the ink slider bar properly. - Open the top cover and snap the hinge arms back into place and close the top cover. Check for proper operation. 2. Customer has not loaded the ink sticks properly and the top cover will not close properly. - Verify the ink sticks are loaded properly and that the customer is using proper Phaser 860 ink sticks. Close the top cover and check for proper operation. PARTS:Parts are listed in the order of highest probability for repair. NUMBER QTY DESCRIPTION PROBABILITY% MODEL S/N FROM S/N TO S/N 200469000 1 COVER; TOP COVER

May 22, 2008 | Xerox Phaser 8200 Laser Printer

2 Answers

MFC-215C printer not printing


Hi, I had the same problem and found the answer from one website. Heres how you can fix it
1) Open the cover
2) Remove the empty cartridge
3) Close the cover without putting in the new cartridge
4) Open the cover and install the new cartridge
5) Close the cover and restart the printer (press power save to shut down and press it again to turn it on

It should go into cleaning and when you check the Ink Status monitor, it will detect that the ink is full.:) Hope this helps, it worked for me

Apr 02, 2008 | Brother Multi-Function CenterĀ® MFC-215C...

Not finding what you are looking for?

Open Questions:

Office Equipment & Supplies Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Jim Keysor

Level 2 Expert

331 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...