Question about Exercise & Fitness

1 Answer

The treadmill have dcmd67 control board I need to know what value resistor R 19 have

That resistor had explod and I can't see the value of it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 362 Answers

I can't help you (directly) with the resistor value, but be aware that if it exploded, there is probably another bad component (such as a capacitor, transistor, and/or an SCR). Replacing only the resistor may result in the same problem, or may not even work at all due to another bad component. If you do find out the value, try putting in a resistor of the same value, but with a higher wattage rating. I once had a washing machine in which the model had a known problem with circuit boards blowing. I solved it by replacing a bad transistor and installing a higher wattage resistor that had blown up like yours. It never failed again. The way I found the value of the blown resistor is, I looked up a replacement board online, then magnified the photo, and looked at the color code on that same resistor in the photo. How I found the bad transistor is too complicated to explain in few words, but you can google the procedure. (You'll need a multi-meter at the very least; preferably _with_ a built in transistor checker. However, a _totally_ blown transistor can be found with only the resistance settings on a regular multi-meter).

Best of luck...

Posted on Apr 05, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Endex DCMD 57 Treadmill power board, will not power up, cuts out almost immediately.


Hello from Greece!
If you see the red led (D1) on when you press the start button on your treadmill you have a short-circuit on your 20N60 transistor. replace this transistor and your DCMD67 circuit board will be new! but be careful, if this happen on your circuit board, In about 90% you must have problem with your treadmill motor or your treadmill belt.
If you have any other question just mail me.

Have a great day!

Oct 04, 2013 | Exercise & Fitness

1 Answer

Diagram for a DCMD67 control board


Hello I have problems with my treadmill when turning on the button of star passing the 3 seconds is heard hears the change of the relay and the treadmill does not work after a time out error in the lcd of time that is due to this

Mar 01, 2012 | Exercise & Fitness

1 Answer

My nordic track a2050 turns on but when we try and press one of the speed buttons (1-10) the r17 resistor on the controller (circuit board) starts to spark. can i change the resistor? what resistanc


Dear Sir:
If you can the change the resistor is o.k ,depending about your skill in electricity or electronic.Remember when you change, but the exactly as indicated in the board. For example the resistor has color code, I can recomend you can buy some chart from Radio Shack, for you will see the exactly value+tolerance)Very Important+Power of resistor.

Meanwhile, if the resistor is Sparking, is indicating there are some short-circuit in the board. By that reason when you change the resistor if the trouble persist, you must send the board or call some service tech from some company for assist you in this problem

Other alternative that you have is RUN THE calibration SOFTWARE,that is coming with your equipment, the instruction most of them coming from the Hood of the motor, other your must use your Instruction Manual.This is important for easy Diagnose and Troubleshooting from your treadmill. Remember this very Complex equipment electronic.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a

Feb 16, 2012 | Nordic Track Exercise & Fitness

1 Answer

I am looking for spare parts or diagrams for control board DCMD67 for Endurance Tradmill runner 5. I am also looking for a new control board DCMD67. Thank you


Go to the 2 next web page:

1) this is free:

http://fitness.manulsonline.com

2) In this you must pay.

www.fitnessrepairparts.com

sincerely. G-d bless you.

E.CUADRA
MANAGUA, NICARAGUA. C.A.

Oct 28, 2011 | Endurance T3 Treadmill

1 Answer

I am looking for a cirit board for a endex DCMD67 for a flowfitness treadmill.


Dear Sir:

Thank you by your request, I hope everything is fine.

I will help you inmediately.

Please go to the next web page expert:

www.fitnessrepairparts.com

You will find any Parts Electronic(Circuit Boards+Electrical Parts+Mechanical Parts) Manuals+Schematics, etc.Of course you need to pay for to buy everything you need.

Thank you in advance, sincerely. God bless you.

E.CUADRA
MANAGUA, NICARAGUA. C.A.

Sep 28, 2011 | Exercise & Fitness

1 Answer

R47 resistor is blown on Neff S5453X0GB/07 control board. I can't make out the value as it is badly damaged - anyone know the correct value so that I can replace it (TY7 is blown as well!).


HI.We cannot really but identify the correct resistor value unless we can identify or determine the color coding on the resistor.Each color has a corresponding value and tolerance as well.If you can't indentify the color coding then you can refer to its diagram usually printed out on the side of the control board or near thecontrol board.We cannot but cannot give a guess value unless color coding is given.Thank you for choosing FIXYA.

Aug 27, 2011 | Dishwashers

1 Answer

I am looking for a cirit board for a endex DCMD67 for a bodyfit treadmill.


my DCMD67 circuit board keeps blowing the fuse or tripping fcl in house sw/bd.
Does not want to start, have had motor checked is ok, leads r ok. What to do?

Aug 12, 2010 | Endurance T3 Treadmill

2 Answers

Burn resistor


if its a 4 band resistor, use the following calculator...
http://www.dannyg.com/examples/res2/resistor.htm

if the resistor is a 5 band, use the following link....
http://www.sizes.com/materls/resistorcolor.htm

hope this helps!

Jun 16, 2008 | Dell E773C 17" CRT Monitor

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Tom Chichester

Level 3 Expert

54189 Answers

ray gallant
ray gallant

Level 3 Expert

64245 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...