Question about Danby Refrigerators

1 Answer

DANBY REFRIGERATOR MODEL NUMBER DFF092C1BSLDB WHERE IS THE DEFROST SENSOR LOCATED

DANBY REFRIGERATOR MODEL# DFF092C1BSLDB WHERE IS THE DEFROST SENSOR LOCATED EVAPORATOR DOES NOT GO INTO DEFROST

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Danby Master
  • 4,656 Answers

The defrost thermostat is going to be behind the rear panel in the freezer and on top of the evaporator there's no picture but you can talk to Danby parts dealers I'm posting a link below to the page that is related to your refrigerator and its parts it come in helpful
Danby DFF092C1WDB Refrigerator 9 20 Cu Ft

Appliance 911 Sea Breeze
If you have any other questions please let me know I'll try to answer them for you. The people that sell the parts call this a defrost protector just for your information

Posted on Sep 10, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My danby refrigerator model # DFF092C1BSLDB stopped cooling, the freezer is still working fine. This is brand new


Cold freezer air is not properly being diverted to refrigerator section. Check out damper and controls for same.

Sep 02, 2017 | Danby Refrigerators

1 Answer

Refrigerator freezer cools fridge section warm


Yes there should be a defrost thermostat on your refrigerator what is the model number so I know what we're talking about do you see formation of frost on the rear wall of the freezer? Appliance 911 Sea Breeze
I'm here to help you out if you will answer my questions

Sep 08, 2016 | Danby Refrigerators

2 Answers

Where is locate the defrost sensor?


It is usually on the evaporator. Post a comment with the model number and brand, and I can tell you more. some refrigerators don't have a sensor for the defrost. They would have a clock style timer that tells it when to defrost.

Mar 24, 2011 | Refrigerators

1 Answer

Danby ref Model no. DFF 1170brwy do seem freezer is ok but ref side is not cooling. thanks


most likely you have a defrost issue click this link to see why http://applianceoutletservice.com/appliance-care-tips/refrigerator-tips/refrigerator-defrost-system-information.htm you need to remove the rear panel inside the freezer to assure that you do not have an ice build up and also that the fan located above the condensor is working properly as well if you have any further questions message me back Thanks Rick

Mar 14, 2011 | Danby DFF1144W Top Freezer Refrigerator

1 Answer

Danby propane fridge model # dpr2262w-6. the freezer still works great but fridge portion does not . the fridge has a bad smell. the fridge is at a cabin and no service


Hi,

Check out these tips...they can help you figure out whats going wrong with your refrigerator and why it is not cooling

Refrigerator not Cooling or Fridge not Cooling

How to Defrost Refrigerator Defrost Timer Problem

Water Running in refrigerator from Freezer

heatman101

Aug 24, 2010 | Danby DPR2262 Top Freezer Refrigerator

1 Answer

Danby DFF8803W freezer keeps freezing up. What causes this?


Some models are a manual defrost. That meant every 3-4 weeks you must unplug it and let it defrost. These types usually have no fan in the freezer, instead it's a cold plate. If there is a fan in your freezer section it should automatically defrost. You might have a bad defrost clock, or a bad defrost heater.

Nov 02, 2009 | Danby DFF8803 Top Freezer Refrigerator

1 Answer

What is the timing on the defrost cycle when the the red button is pushed?


I can't tell without a model number but most defrost for 20 or 30 minutes every 8 hours or so. Unless you have an adaptive defrost control and it varies with those based on usuage.

Aug 16, 2009 | Danby Compact Refrigerator DCR-101W

1 Answer

What does P1 mean on display?


Danby's Consumer Help Line (1-800-263-2629) is always busy. So, I called their General number: 419-425-8627. The receptionist transferred my call to their Service dept. My call was answered in 2 minutes.

The Service Rep. described the following code for my dehumidifier model (DDR657EE):
P1 = Defrosting: the unit will go into Defrost mode periodically to ensure that the parts are working at the right operating temperature. It should be in Defrost (P1) mode for only a brief period of time. If the unit is in Defrost (P1) mode continuously for a couple of hours (or more), then you should call Danby Service for further assistance.

He had no documentation of a P2 code for my model.

He also described other General Codes (applicable to most Dehumidifier/Humidifier models):
E1 = Not enough water
E2 = Not draining
E3 = Water temperature too cool
E4 = Overflow Switch activated
E6 / E7 = Problem with Temperature Sensor

I hope that helps.

May 16, 2009 | Danby Dehumidifiers

1 Answer

My model is DDR4009EE, after it run for a while, the display changed from RH to "P1",what does "P1" mean?


My Danby DDR657EE shows P1 periodically also. So, I called Danby.

Danby's Consumer Help Line (1-800-263-2629) is always busy. So, I called their General number: 419-425-8627. The receptionist transferred my call to their Service dept. My call was answered in 2 minutes.

The Service Rep. described the following code for my dehumidifier model (DDR657EE):
P1 = Defrosting: the unit will go into Defrost mode periodically to ensure that the parts are working at the right operating temperature. It should be in Defrost (P1) mode for only a brief period of time. If the unit is in Defrost (P1) mode continuously for a couple of hours (or more), then you should call Danby Service for further assistance.

He had no documentation of a P2 code for my model.

He also described other General Codes (applicable to most Danby Dehumidifier/Humidifier models):
E1 = Not enough water
E2 = Not draining
E3 = Water temperature too cool
E4 = Overflow Switch activated
E6 / E7 = Problem with Temperature Sensor

So, if you see P1 periodically (for brief periods), then it would be normal.

Also, here is a link to Danby's FAQ page for Dehumidifiers (which answers some common questions):
https://www.danby.com/faqs.php?cat=12

I hope that helps.

May 11, 2009 | Dehumidifiers

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danby Refrigerators Experts

William Miller
William Miller

Level 3 Expert

9174 Answers

Cindy Wells

Level 3 Expert

6031 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Danby Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...