Question about Canon imageRUNNER 2016 All-In-One Laser Printer

Open Question

Canon ir 2016 error code e000100 - Canon imageRUNNER 2016 All-In-One Laser Printer

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
spinal
  • 287 Answers

SOURCE: canon ir 5570 - error E000100-0001

Hello prntrfxr,
E000100-0001 is a secondary code to the initial problem. It means verbatum " The power has been turned off and back on again without resetting the error ". So, there was a previous error code that instructed the customer to turn off the main power and turn it back on in an effort to reset the code. Unfortunately this must have been an error code regarding the fusing system. Canon designed the copier to prompt the customer to power the copier off and back on for all error codes, and more often than not the copier can recover to some degree or another. Fuser codes on the other hand WILL NOT reset even though the display says to power off/on . You will need to go into service mode to reset the error. Press "additional functions"......then the numbers 2 and 8 at the same time and then additional functions again. If you have followed these steps properly you will now be in service mode and a different screen. Just follow these instructions. Press copier. Press functions.Press clear.Press err.Press ok. Power off and on . This WILL clear the code. However, if the problem still exists the code will return of course. THAT code is the one we need to troubleshoot! :-)

Posted on Apr 20, 2008

Ad
  • 1 Answer

SOURCE: Troubleshooting, Error Codes

I have problam Canon IR 2016 error message SYSTEM ERROR E 007

Posted on Sep 21, 2008

  • 199 Answers

SOURCE: Error E007 canon IR 2016

An error in the rotation of the fixing film is detected.
The reading of the main thermistor is 100°C or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven.

To clear the error, execute the following in service mode: -
COPIER>FUNCTION>CLEAR>ERR.

to open service mode press star press 2 and 8 key same time then press star again.

Is there a fault in the fixing film edge rotation detection mechanism?
YES: Replace the fixing film unit.

Posted on Mar 05, 2009

  • 1 Answer

SOURCE: Canon iR-2016 System erro E007

hi how do solve this problem system error E007

Posted on Apr 09, 2009

  • 1 Answer

SOURCE: canon ir 2016 cannot/wont connect to computer via usb

I have a machine it write DOWNLOAD STANDBY.Hw may i do it.

Posted on Apr 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

I have Canon iR 2016 it show E808 code error


i have canon Ir2016 it give 808 error code can u help me please

May 29, 2010 | Canon iR 2016i Black and White Copier

6 Answers

CANON IR 3300 HAS ERROR CODE: E000002-0000


OK, but first try to clear the error under service mode, then replace fixing film assy, for EU 240V is FG6-6041.
To clear the error:
* 2 8 *
COPIER
FUNCTION
CLEAR
ERR
OK
Turn off and on ( main switch )

If this dont help - replace fixing film assy.

Dec 02, 2009 | Canon (6981A002AA) for imagerunner 2200,...

2 Answers

Canon ir 2016 copier on display says ( Download Standby) thanks


We have a Canon IR 2016 J and in a beginning in the dispaly appears the message "Download Stanby" then after we replaced the PCB board appeared the message "System Error E354" what should we do to solve this problem, and if it is possible to send us the Service Manual with error codes for Canon IR 2016

Apr 18, 2008 | Panasonic KX-FB421 Plain Paper Film Fax

2 Answers

Canon ir 5570 - error E000100-0001


Hello prntrfxr,
E000100-0001 is a secondary code to the initial problem. It means verbatum " The power has been turned off and back on again without resetting the error ". So, there was a previous error code that instructed the customer to turn off the main power and turn it back on in an effort to reset the code. Unfortunately this must have been an error code regarding the fusing system. Canon designed the copier to prompt the customer to power the copier off and back on for all error codes, and more often than not the copier can recover to some degree or another. Fuser codes on the other hand WILL NOT reset even though the display says to power off/on . You will need to go into service mode to reset the error. Press "additional functions"......then the numbers 2 and 8 at the same time and then additional functions again. If you have followed these steps properly you will now be in service mode and a different screen. Just follow these instructions. Press copier. Press functions.Press clear.Press err.Press ok. Power off and on . This WILL clear the code. However, if the problem still exists the code will return of course. THAT code is the one we need to troubleshoot! :-)

Apr 17, 2008 | Canon imageRUNNER 5570 Copier

6 Answers

Canon iR-2016 System erro E007


hi how do solve this problem system error E007

Dec 04, 2007 | Canon CLC 1140 Copier

2 Answers

Troubleshooting, Error Codes for canon ir 2016.


I have problam Canon IR 2016 error message SYSTEM ERROR E 007

Oct 01, 2007 | Canon ImageRunner 2016 Copier

Not finding what you are looking for?
Canon imageRUNNER 2016 All-In-One Laser Printer Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2253 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...