Question about Sharp MX-2700N Color Copier

Open Question

How get and install sharp mx 2700n firmware

How do i get and upgrade the firmware of my machine? Also, it displays L4-02 while the paper feed motor is okay, what do i do?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 24 Answers

SOURCE: error code h4-01

P * C * enter sim 14 press copy key then CA. Machine should reboot. if problem re-occurs your thermostat in the fuser has tripped

Posted on Dec 01, 2008

Ad
  • 143 Answers

SOURCE: Sharp MX-2700N - Error Code - 'Call for Service E7 - 05'

E7 is only part of the code. It could be a hard drive problem, memory problem, laser problem, or a loose connection on one of the boards.

Posted on Aug 01, 2009

  • 1316 Answers

SOURCE: What do it do to fix ''maintenance required Code: CA''

The service acces code C-0-0-C,or C - interupt key -0-interupt key.Acces the list of commands maintenance preset counter setting and set to a new value,or maintenance counter clear.

Posted on Aug 02, 2009

rezazadeh
  • 328 Answers

SOURCE: Sharp MX-2700N how can I clear maintenace code CA?

enter code 20-1 start

Posted on May 27, 2010

  • 9 Answers

SOURCE: after installation my sharp ar-m420u

L1 MEANS U HAVE TO REMOVE THE SCANNER LOCK WHICH IS ON THE SIDE OF THE MACHINE.
F2 MEANS SOME PROBLEM WITH YR TONER CATRIDGE.CHANFE IT AND SEE

Posted on Jan 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i upgrade firmware of sharp mx2700n copier


To update the firmware, set DIP SW 2 on the MFP control PWB to ON.
1) Insert the USB memory into the machine.
* When USB is not connected, "INSERT A STORAGE FIRMWARE STORED ON" is displayed. When [OK] button is pressed, the display is shifted to the folder or file selection screen.
2) When a firmware update folder or file button is pressed, the display is shifted to the firmware update screen.
* The number of buttons depends on the number of files in the inserted USB memory.
A folder name or file name is displayed on the button.
If the folder name or file name is of more than 34 characters, only 34 characters are displayed.
For a folder name, "<DIR>" is displayed at the head.
* When [ .. ] button is pressed on the file selection screen, the display is shifted to the folder or file selection screen. On the folder or file selection screen, the keys are disabled.
* The path of the folder or file is displayed on the title section.
If the path is of more than 50 characters, only 50 characters are displayed.
Read more >> http://electrohelponline.blogspot.com/

Aug 19, 2016 | Sharp MX-2700N copier

1 Answer

How do I remove Error code L4-02


L4 errors relate to motors. L4-02 specifically means Paper feed motor locking trouble.

You will need to take it in for repairs.

Nov 05, 2015 | Sharp MX-2700N Color Copier

1 Answer

What shall i do to return my sharp mx-2700n copier to operation?


have you check the sensor actuates on the registration section

Oct 19, 2015 | Sharp MX-2700N Color Copier

1 Answer

My Copier Sharp MX-2700N displays print quality Automatically adjusted and it wastes so much time to initialize. How do i fix it?


might also be the it has to have its firmware re-flashed have tech come and check it out and have a good cleaning done.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Aug 12, 2015 | Sharp MX-2600N Laser Multifunction Printer...

1 Answer

We have a code h4-30 on a sharp mx-2700n how do I reset?


You need to make sure the machine is in Copy Mode when you hit
# * C *
enter 14, then touch start
execute on the screen
the machine will reboot and the code should go away.

If it persists you may need some maintenance. If you're in Houston give us a shout. Our labor rates are low compared to the other Sharp dealers in Houston.

Skelton Business Equipment Houston Copiers
http://www.youtube.com/equipmybiz

Jul 07, 2014 | Sharp MX-2700N Color Copier

1 Answer

Misfeed- cleared, but still says misfeed is there


Hi
1st when using transparency paper U must set up the printer propreties to paper kind U use.
for now do the sim. 30 -1 to see hows sensor is detected bi touche

Jun 16, 2014 | Sharp MX-2700N Color Copier

1 Answer

Sharp mx-2700n keeps jamming. No visible obstruction. Can I reset machine to test for faulty sensor?


Sir,
you have to clean all Rollers(Paper Feed)with wet cloth.then check printer propertis under features paper type as plain paper(which type of paper u r using select that paper size.

May 23, 2011 | Office Equipment & Supplies

1 Answer

Sharp mx 3500 won't recognize custom paper


In the printing properties, on the paper select tab, change the paper tray from automatic to by pass tray

Jun 19, 2009 | Sharp MX-2700N Color Copier

1 Answer

Error code h4-01


P * C * enter sim 14 press copy key then CA. Machine should reboot. if problem re-occurs your thermostat in the fuser has tripped

Dec 01, 2008 | Sharp MX-2700N Color Copier

Not finding what you are looking for?
Sharp MX-2700N Color Copier Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...