Question about Sharp MX-2700N Color Copier

2 Answers

Sharp MX-2700N - Error Code - 'Call for Service E7 - 05'

Can anyone help solve this problem - really need to get it sorted even if only temporarily. Thanks

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 143 Answers

E7 is only part of the code. It could be a hard drive problem, memory problem, laser problem, or a loose connection on one of the boards.

Posted on Aug 01, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

Andy402

Actually its a memory problem or garbled data.
First option is to clean the local memory pin
Second option is check the installing state of the memory.


If it's garbled data use the sim 60-01to check the memory read/ write

lastly replace the memory.

Posted on Aug 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I print to the MX-2700n?


If you are conecting directly you should be using a usb cable and you will need to install print drivers from sharp usa.

I’m happy to help further over the phone at https://www.6ya.com/expert/ethan_e84416e0b13809d2

Aug 29, 2014 | Sharp MX-2700N Color Copier

1 Answer

We have a code h4-30 on a sharp mx-2700n how do I reset?


You need to make sure the machine is in Copy Mode when you hit
# * C *
enter 14, then touch start
execute on the screen
the machine will reboot and the code should go away.

If it persists you may need some maintenance. If you're in Houston give us a shout. Our labor rates are low compared to the other Sharp dealers in Houston.

Skelton Business Equipment Houston Copiers
http://www.youtube.com/equipmybiz

Jul 07, 2014 | Sharp MX-2700N Color Copier

1 Answer

The Sharp MX2700 Colour machine has come up with an error code DK, what does this code refer to.?


This code means the Black Developer powder has reached the end of its life A service call will be needed to replace this for good black prints

Apr 26, 2010 | Sharp MX-2700N Color Copier

2 Answers

Code U2-05 call for service code!


This procedure may help, it works on older models.
Press # key
press * key
press C key
press * key
enter 16
press start key
Turn the machine off and then back on
Good luck

Apr 20, 2009 | Sharp MX-2700N Color Copier

2 Answers

Sharp-MX2700N Maintenance Code VK


VK = 100,000 pages printed on the developer counter or 715,000 revolutions of the developer unit (as mixing can occur even when pages are not being printed). Developer can break down over time and or the seals can be damaged - so service by a technician is indicated. If maintenance was recently performed and the developer replaced then the counter needs to be reset.

Feb 04, 2009 | Sharp MX-2700N Color Copier

1 Answer

Call for service: code U2-05


i think that u2 shows some memory or eeprom problem just reset it .press clear key,exposure mode key,clear key,exposure mode key,press all these key in sequence and quickly.display will go dead now press 16 then start key.code will bi removed .mian jee

Jan 16, 2009 | Sharp MX-2700N Color Copier

1 Answer

Sharp mx 2700n how to go SP mode and i get error code h5.01 how i solve this problem


Use SIM14 to
cancel the trouble.

Entering the simulation mode
1) Copy mode key ON → Program key ON → Asterisk (*) key
ON → CLEAR key ON → Asterisk (*) key ON → Ready for input of a main code of simulation
enter 14
accpet yes clear..
machine should restart.
You may have to have a tech look into why this is jamming...

Hope that helps
Lbcoaster

Dec 23, 2008 | Sharp MX-2700N Color Copier

1 Answer

Error code h4-01


P * C * enter sim 14 press copy key then CA. Machine should reboot. if problem re-occurs your thermostat in the fuser has tripped

Dec 01, 2008 | Sharp MX-2700N Color Copier

Not finding what you are looking for?
Sharp MX-2700N Color Copier Logo

1,039 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...