Question about DISH Network Televison & Video

1 Answer

I have a Phillips sound bar HTL 4115B. I am wanting to program into my dish network remote. What code do I need to use?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • DISH Network Master
  • 76,125 Answers

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Posted on Jan 29, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Insignia soundbar


I have listed the steps below to assist with programming the remote to your Sound bar. Please know that we do not promise your remote will function with your sound bar. If you have any other questions, let me know at Kimberly.escobar@dish.com!

Visit this link to obtain the code/s to address remote to sound bar: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The Aux button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code and try this procedure http://www.mydish.com/support/program-to-tv-scan-non-basic?WT.svl=leftnav

Kimberly Escobar
Social Media Representative
DISH L.L.C

Feb 12, 2014 | Televison & Video

1 Answer

Codes for innovage universal remote to program it with my dish network box


Hi Gw, my name is Mike Houston a Social Media Representative at DISH. I understand you want to program your innvoage remote to our DISH receiver. When we send out our DISH receivers we will include our own DISH universal remotes that can control many different components like; HDTV, surround sound receivers and sound bars. We do not have the codes for other universal remotes to work with our system. I will provide you a link explaining in more detail on programming your remote: http://www.ehow.com/way_5501311_innovage-jumbo-universal-remote-instructions.html

Sep 01, 2012 | DISH Network ViP722 DTV Receiver /...

2 Answers

I Have a 5.3 IR Remote and a vizio VSB200 Sound Bar. The remote will not program to the Sound Bar. The Optical Audio is connected to the TV. What do I need to do.


lojr,

We have code to use with amplifiers, TVs, VCRs, and DVD players. I do not have a code that will work on this sound bar. What is the code you are trying to use? Did Vizio supply a code with your sound bar. They do have codes to use for their TVs to program DISH remotes. Please let me know if you have a code or you can contact Vizio to see if they have a code available.

I have provided the Power Scan instructions on programming the remote to a sound bar. Use the VCR button to attempt to program the sound bar.

If you have further questions, please post it here.

Ray Calo
DISH Network - Executive Offices

Power Scan Instructions Power Scan Instructions

1. While at the sound bar location, point the remote at the sound bar. Press and hold the VCR MODE button on the remote until all four MODE buttons at the top of the remote light up.

filestream.ashx?id=435
2. Press the RECEIVER POWER button on the remote.

filestream.ashx?id=436
3. Press the UP ARROW on the remote, about one press every two seconds. Stop as soon as the sound bar turns off. This process may take several minutes.

filestream.ashx?id=438
4. Press POUND (#) on the remote. The VCR MODE button will flash three times.

filestream.ashx?id=440(VCR button instead of TV button)

5. Press VCR MODE button, then red TV button on the remote to turn on the sound bar. Press VOLUME on the remote to confirm the remote controls the sound bar. If this does not work, return to Step 1.

filestream.ashx?id=442
Remember to press the SAT MODE button to return to the Satellite mode to change channels.

Jan 13, 2011 | DISH Network IR Remote Control

3 Answers

Need dish code for remote for vizio soundbar


Hey there, this is Cheri Torres with DISH Network customerservice. I wanted to see if I could help you with the question you posted aboutthe Vizio sound bar. I was unfortunately not able to find any codes for theVizio sound bar. Another option you can try is running a channel scan to findyour code that will work best to control your sound bar. I hope that theseinstructions are useful to you. If you have any further questions or concernsplease feel free to post back here or email me at Cheri.Torres@Dishnetwork.com.

Remote: All Remotes (except Basic)
    1. With the desired equipment on, press and hold the correct Mode button until all mode button back lights illuminate, then release.
    2. Press and release the Power button. AUX Mode: Before pressing and releasing the Power button
      • Press 0 for a TV
      • Press 1 for a VCR/DVD
      • Press 2 for any other device.
      Then Press STAR (*)
    3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
    4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

Dec 27, 2010 | DISH Network IR Remote Control

1 Answer

I am looking for the code for my Visio Sound Bar to program into my Dish Network remote to the AUX button. Has anyone talked with Visio Support to get this code? Thanks.


ronwright22

I have provided a link for you to Vizio's Website. The information below is for a VSB210WS sound bar. I would go to this link and research your model number and look for the code. You may try the code on this screen to see if it will work. I have also provided a link with instructions on programming your DISH remote to other components.

Vizio Website:

http://www.vizio.com/vsb210ws.html
This is the VSB210WS sound bar.

Programming a Universal Remote to operate the HD Sound Bar System If you own a VIZIO TV with a Universal Remote that uses a 5-digit programming code, you may program a device button with code 31517. This will map the Universal Remote button to operate the HD Sound Bar System as follows: Pictured at right is the VIZIO VUR8P Universal Learning remote.

Ray Calo
DISH Network

Nov 09, 2010 | DISH Network IR Remote Control

1 Answer

I need codes to program my vizio sound bar to my dish remote


need 3-digit code to program Vixo sound bar to Dish Network 5.4 IR remote

Dec 16, 2009 | DISH Network IR Remote Control

2 Answers

I just got Dish network and need to program their remote with the Phillips TV


Here are the codes. You need the manual to know how to program the remote for the TV though.

Philips Televisions 566, 565, 556, 688, 525, 651, 652, 655, 656, 671, 690, 723, 724, 729, 770

Good Luck

Dec 23, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Need codes for a phillips magnavox for dish network controller


Follow this link and got to the remote section. Once there shoose the type of remote you have and select remote codes to get the ones for that particular remote that may operate the piece of equipment desired. I hope this is of assistance to yoiu and thanks for using Fix Ya. Please let me know if I can be of further assistance.
Jim

Nov 02, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...