Question about Summit Washing Machines

Open Question

Hello, I have a summit 1800 spwd combo washer it's showing a err 13 code can I repair this or will I need a technician.. Thanks

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 56 Answers

SOURCE: toshiba 13' tv dvd combo, Fios remote control need code

Greetings!

Here are the codes: take a deep breath:

0181, 1283, 0183, 1292, 0087, 0677, 0859, 0872, 1183, 1383, 1683, 1731

You may find that these don't work. Often, with combination pieces like yours, you will find you are lucky if you can get a universal remote to turn it on and change the volume and little more. The fact that Toshiba did not build this peice can compound the problem. My suggestion, if you can't get the universal to program up, is to use the original remote for the set. If you do not have the original remote it is available from www.encompassparts.com for around $15.00 plus shipping. The original part number for the Toshiba remote is 72796929.

Good luck!
Rob

Posted on Jan 14, 2009

Ad
swmmwg
  • 11 Answers

SOURCE: need 13'' magnavox tv/dvd combo code for dish remote

To find the right code first click here.

Next click on the "Remote Controls" section.

Select the type of remote you have (based on the receiver model) to view the remote control users manual.

Hope this helps!

Posted on Mar 16, 2009

  • 1 Answer

SOURCE: error code E:13 is showing on the washer

Mine did it too on a light load. Set to reduced spin and rinse spin and everything ok. Think this code shuts washer down when spinning out of balance to protect damaging the unit.

Posted on Sep 30, 2011

  • 174 Answers

SOURCE: forgot security code for nokia 1800

If the default codes does not work, you can try Master reset codes in any nearby shops. Getting the master reset code is the only solution for a forgotten security code.

Posted on May 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a front loading washing machine brand is Frigidaire the lights are on dial will not change the cycle, stays on normal and get ERR in display?


Thank you for your inquiry, Dario Hernandez!

I see that you are having difficulty with your Frigidaire front load washer displaying an "ERR" code. Typically "ERR" stands for an error has been detected this could mean that you have a miscommunication within the control panel. I would suggest resetting your washer and you can do that by flipping the household circuit breaker off for roughly ten minutes. If you continue to have an issue with your washer I would recommend contacting a professional technician for a diagnosis to be completed. The technician will have the appropriate tools to pinpoint the part needed for repairs. Hope this is helpful information. -OOS

Feb 05, 2015 | Frigidaire Washing Machines

1 Answer

My Electrolux time manager washing machine wont start jus flashes red with Err


Hey Beverley, thanks for your post!

I see that your Electrolux washer is displaying the error code "ERR". Typically a number follows the "ERR" but if no number followed the "ERR" error code then your washer has detected an error. I would perform a reset on your washer which can be done by unplugging the power cord or flipping the household circuit breaker for roughly ten minutes.

If that does not help correct the issue it could be a problem with your control panel or wiring harness. I would recommend seeking out assistance from a professional in order to properly diagnosis and repair your washer. I hope this is helpful to some degree. -Matt

Oct 04, 2014 | Washing Machines

1 Answer

What to do with err code e5e? help


Hi Friend, this is Z. Thank you for your question!

Typically error code E5E indicates that your Frigidaire washer is experiencing a communication problem. Base on the intensity of the issue, I suggest contacting a professional technician to accurately repair your washer. Typically, a technician will need to check the wiring between the main control board and the speed control board. Depending on the diagnoses and if the wiring is bad, it has to be corrected. However if the wiring is good the main control board may need to be replace or if the problem is not corrected, the speed control board is possibly faulty.

Jul 10, 2014 | Frigidaire ATF6000ES Front Load Washer

1 Answer

What is the error 1 sign for my summit spwd 1800


It means something is wrong with door lock mechanism.im currently having same problem.

Jul 05, 2014 | Summit SPWD1800

2 Answers

Dryer proplem


Rather than try to give you answers, I'm giving you this online link that COULD lead you to a solution: http://appliantology.org/topic/42011-washer-dryer-combo-error-code-er13-haier-summit-ariston/
I looked at it for a few minutes and answers are up and down between encouragement and discouragement. One suggestion is a bad thermostat at the top of the unit, but I'm not sure if you'll be successful in locating replacement parts according to some of the things I glanced at. Hope this helps.

Jun 28, 2014 | Summit SPWD1800 24" Washer/Dryer Combo...

1 Answer

Need codes for toshiba VCR/DV combo


Hello,
As a Dish Technician, I always have had a hard time getting remotes to program to DVD/VCR combos. My professional suggestion would be to simply check online, which really usually isn't very helpful.
Thanks,
Dish Guy

Dec 28, 2013 | Innovage Jumbo Remote Control

1 Answer

Laveuse show err


Hello tseitlenok - Typically ERR indicates that the washer has detected an error. Try reprogramming the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and restart unit. If error code does not clear, I would personally recommend consulting a certified technician for an accurate diagnosis and to assist with the repairs.

Mar 01, 2013 | Frigidaire Gallery GLWS1339EC Top Load...

1 Answer

Detector shows 888 when first switched on then 0 then err with bleep


Showing 888 for a second is normal, it is a display test.
But Err means the unit is faulty or end of life (around 7 years), it can't be repaired so it should be disposed of and a new one bought.

Dec 20, 2010 | Kidde Nighthawk Combo Gas/co Detector

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Summit Washing Machines Experts

ray gallant
ray gallant

Level 3 Expert

63731 Answers

 Russ Hill
Russ Hill

Level 3 Expert

4048 Answers

Bill Boyd

Level 3 Expert

53745 Answers

Are you a Summit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...