Question about Midland Radio Communications
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: midland 75-785
Given the fact that when you key up the mic you should not hear any thing because the receiver section is "turned off" (no antenna and the speaker is muted). This would seem to indicate that the switch the headset controls which allow the change over from RX to Tx is bad or that the circuit in the CB unit which the head set plugs into is having a problem. Do you hear the same flutter without the headset? Try to get another headset or test one out just to see if the problem is eliminated by using a known good headset.
Posted on Sep 04, 2007
SOURCE: midland cb model 13-895
Hi Frank, It sounds to me like you may have a bad dectector diode. Other possibilities are cold solder joints in the stand up boards in the IF section. Good Luck
Posted on Jan 08, 2008
daniel, first off, I need a complete model number for the radio info. Midland only made about 40-50 different models over the years. The header calls for a 75-822 and you are asking for a ** 833. The beginning should be a 13 or 75,76,77,78. Let me know the # and i'll be able to get you the proper pinout.
Posted on Mar 08, 2008
Tips for a great answer:
Feb 06, 2016 | Midland Radio Communications
Apr 10, 2013 | Midland Radio Midland 78 Plus Multi B Cb...
Jan 06, 2011 | Midland 1001Z 40-Channels Base CB Radio
May 16, 2010 | Midland 77-099 CB Radio
Sep 27, 2008 | Midland 1001Z 40-Channels Base CB Radio
94 people viewed this question
Usually answered in minutes!