Question about Motorola Radio Communications
I understand these are older but I cant just go buy new ones. Both radios work on their own, meaning each one can ring and talk just not to each other. I have searched the web with no working answer yet. THANKS AnyONE
Take the radios back to a very basic setting with all special features turned off. If the radios have a Qt filter check to see it is turned off, and set your Code to zero (off) on both units. Also, check to see your battery is good in both units. Trade the battery with a known good radio to see if the problem moves to the other radio, is a simple test.
Posted on Sep 10, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: cect i9 passwords
all the phones have a default password from the company.for e.g nokia has the default password as 12345. you can find the code by referring to your instruction manual.thanks for using fixya!. please dont forget to rate my solution.
Posted on May 28, 2009
After powering up the printer, press Menu, * key, # key (do not hold them, just press and release). You should see a secret menu, the first option being "Serial number". From there, I scrolled down to Network menu -> NVRAM reset to reset the network card. There also seems to be a Utilities menu which allows a full system reset.
Posted on Aug 23, 2010
I had the same problem with this printer. I tried cold resets and flashing the firmware on the printer and still came up with an IP of 0.0.0.0 and the printer still set to manual. Here's what worked for me.
When flashing the firmware the first time, I only had the usb connection from the computer to the printer. After a few other attempts, I tried flashing with the usb cable connected AND the network cable connected from the printer to the wall port. After this the configuration page gave me DHCP and a brand new IP Address.
Here is a working link to the firmware for Windows.
So just simply have the network cable connected while flashing the firmware on the printer, hope this helps.
Posted on Feb 09, 2012
The router's admin page is http://192.168.1.1 or http://192.168.0.1 and
the default password should be either "admin" or "password" without
quotes. There should be a choice under "Setup" called "Factory Reset".
That will erase the settings and reset it like new.
Alternatively, you can follow the procedure as given below on all the brands I've tried (Belkin, D-Link, Linksys)
1. hold the reset button for 30 seconds (don't release)
2. unplug the power (still holding reset) for 10 seconds
3. plug power back in (still holding reset)
4. hold reset for another 30 seconds - the lights will usually begin flashing in some odd pattern
5. release the reset button
6. wait 1 full minute or until the lights stop flashing
7. unplug the power for 10 seconds, just to do a reboot
8. verify the settings (e.g. SSID) are back to the defaults
Get instant online router support for D-Link router/wireless router at http://www.vtechsquad.com/wireless-router-support/ to fix D-Link router/wireless router issues.
Posted on Oct 25, 2012
Tips for a great answer:
Jan 04, 2017 | Weddings
May 31, 2017 | Motorola HT1000, MTS2000, MTX8000/9000...
Dec 15, 2012 | Cobra Electronics CXT135 microtalk cxt135...
Oct 29, 2012 | Radio Shack Wireless Weather Forecaster
Dec 05, 2009 | Cobra Radio Communications
May 01, 2009 | Video Game Consoles & Games
Mar 29, 2009 | Cobra Microtalk 100 FRS Walkie Talkie...
Jan 19, 2009 | Emerson Smartset Clock Radio
Jan 10, 2009 | Galaxy Radios DX- 88HL Base CB Radio
292 people viewed this question
Usually answered in minutes!