Question about Sony Televison & Video
Performing a power reset
1. Turn off the television.
2. Unplug the television power cord from the electrical outlet.
3. Let the television remain without power for 60 seconds.
4. Plug the power cord back into the electrical outlet.
NOTE: If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.
5. Turn on the television.
How to establish an HDMI connection between a TV and other device.
Follow the steps below if the HDMI® connection between your TV and other device is not working:
1. Make sure both the TV and other device are turned on.
2. While turned on, unplug the power cords for the TV and device from the electrical outlet.
3. Disconnect the HDMI cables from the TV and other product.
4. Wait 60 seconds.
5. While the HDMI cables are disconnected, plug the power cords back into the electrical outlet.
6. Turn on the TV.
7. Re-connect the HDMI cables.
8. Turn on the HDMI-connected product.
The TV should now detect the HDMI signal from the connected device and operate normally. If there is still a problem, disconnect the HDMI cable from both products and then reconnect it in the opposite direction. In some situations this has been reported to resolve connection issues.
How to reset a TV to factory settings: https://us.en.kb.sony.com/app/answers/detail/a_id/61396
Hopefully this post helps you! If does, please mark it "accept as solution"
Posted on Sep 06, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: dvd player will not open
look at the bottom of the unit and see if it has a slot to put in a pin and manually open the drive, most of them have some way to do this look for a slot or pin hole to push the release, sometimes they do this because someone pushes the drawer closed instead of using the button or remote, you will have to open it to reset it if that is the case you might have to easily force it open.
Posted on Dec 24, 2007
SOURCE: Built-in DVD player
Are you trying to play DVD's you've made or copied yourself or new one's you buy from an actual distributor? Because sometimes self-ripped Cd's & DVD's won't play on a LOT of DVD players. Otherwise it's bad DVD player and you should go get it swapped out if it's not too late.
Posted on Mar 02, 2008
After variety of different tests and findings I have resolved this issue. It appears that the DVD burner was not in good working order and the DVD player was not at fault. Thanks you to all who answered and responded to my problem. Many thanks.
Posted on Aug 20, 2009
Tips for a great answer:
Jan 16, 2015 | Sony Bdp-bx58 3d Wifi Blu-ray Disc/dvd...
Jul 11, 2012 | Sony DVP-NS575P DVD Player
Mar 07, 2012 | Sony RDR-HXD860 DVD Recorder/HDD Recorder
May 29, 2011 | Sony Televison & Video
Mar 14, 2010 | Sony DVP-NC600 Multi-disc DVD Player
Aug 18, 2009 | Sony DVP-CX850D DVD Player
May 25, 2009 | Sony BDP-S300 Blu-Ray Disc Player
Dec 31, 2008 | Sony BRAVIA DAVHDX275 Theater System
Dec 02, 2008 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV
Aug 19, 2019 | Sony Televison & Video
47 people viewed this question
Usually answered in minutes!