Question about Hitachi Televison & Video

Open Question

The Hitachi TV set will not turn on It is attached to Foxtel the foxtel box will turn on

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: Need to connect the following: Foxtel

how can i recover my dvdrecorder's HDD?

Posted on Mar 09, 2008

Ad
Benimur

Louie Role

  • 6966 Answers

SOURCE: NO Signal on TV but Foxtel works

Hi,

I am assuming that you have confirmed that your Foxtel works in another TV but not with the Toshiba 37WLT66A and that you are using a single feed from the cable provider and split into two (or more). Additionally, this is a standard cable connection.

If the unit is new, then perhaps it is a matter of programming the Channels using Cable not Std or Air in the menu. If the Toshiba has been used before in the same setup, then possibilities are:
1. cable/connector leading to the Toshiba;
2. splitter or distribution amplifier (if present);
3. worst case scenario, tuner block of the Toshiba.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.


Posted on Jun 10, 2008

Anonymous

  • 247 Answers

SOURCE: How do I tune my Sharp TV G0833PE to Foxtel

what is foxtel? is it a cable company? or satelite company?

Posted on Jan 07, 2009

Anonymous

  • 121 Answers

SOURCE: Panasonic Viera link and Foxtel IQ

It is very likely that cross talk does corrupt the link but for Panasonic to "blame" anyone else is not very professional. Anyway, if it worked for 6 months perhaps disconnecting the Foxtel IQ and reestablishing the Viera link with the Panasonic devices then reconnecting the Foxtel IQ for another 6 months of happy viewing. This is not a permanent solution but the alternative doesn't seem to be an option.

Posted on Feb 26, 2009

Anonymous

  • 1 Answer

SOURCE: I was filtering my foxtel signal through an

My problem was really a solution. I was just trying to warn others using Arista boards to not filter their Foxtel signals through their boards. I solved my problem by bypassing the Arista board, Foxtel Australia tell me that their IQ+ boxes have surge protection built in. I guess when you get a surge, the Foxtel box burns out and you have to get Foxtel to come out and replace it.
Cheers

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Foxtel box will not turn on, I checked batteries not that.


Box won't come out of standby - Support - Foxtel

https://www.foxtel.com.au/support/tv/troubleshooting/.../foxtel-boxes/standby.html
Reset your Foxtel box by switching the power off at the socket, then pull the power cord out from the back of the box. Leave the power disconnected for at least 30 seconds. Plug the Foxtel power cord back in and switch the power on. Your Foxtel box should turn on and light up.

Foxtel box has no lights - Support - Foxtel

https://www.foxtel.com.au/support/tv/troubleshooting/.../foxtel-boxes/no-lights.html Step 1: Check the power cord is connected securely. Check the power cord is secured tightly at the back of your Foxtel box and at the power socket. If your remote isn't working, troubleshoot your remote click here.

Solved: Box will not turn on - Foxtel Community - 30431

https://community.foxtel.com.au/t5/Foxtel-TV/Box-will-not-turn-on/td-p/30431 My box is frozen with the green light on. Have tried unplugging and leaving for a couple of hours but it still will not turn on whether using the remote or the button ...

Solved: Foxtel wont turn on - Foxtel Community - 10049

https://community.foxtel.com.au/t5/Foxtel-TV/Foxtel-wont-turn-on/td-p/10049 Does the box stay in standby mode - the light staying red instead of turning green? If the orange light is flashing on the box when you use the remote then the ...

Foxtel Now box start up issues - Troubleshooting - Foxtel Now

https://www.foxtel.com.au/now/support/troubleshooting/box/startup-issues.html Troubleshooting and tech help for your Foxtel Now box if it does not boot up successfully or won't turn on.

May 11, 2018 | Televison & Video

1 Answer

I would like to connect my DVD player and Foxtel to me tcl smart tv but have no idea how it do it. Can somebody please help me.


depends on the output from Foxtel
is it antenna rf coaxial on foxtel ?
is it hdmi output on foxtel box ?
is it an AV RCA cable output on foxtel box ?
what does dvd player use for its output ?
Suggest you google these connection interface types and work out what is the output types
if rca then use av input on tv
is hdmi then use hdmi input on tv
then use select input source on tv to switch to whatever you used.

Jan 20, 2017 | Televison & Video

1 Answer

I would like to find out the TV code for my 55' Bush tv so I can programme my sky TV remote please.


Hi Darren, I have Sky (foxtel) and the Sky box (foxtel box) is hooked up to my television and the only thing is i turn the volume up to full on the television and control everything (volume and change channel) through my Sky(foxtel)remote control..... I hope this helped, CHEERS..

Mar 31, 2016 | Bush Televison & Video

1 Answer

I have sony KDL55W900 TV. When we switch it off from remote control, after 10 minutes it switches the Foxtel unit off completely. When we power up Foxtel it goes thjrough full reset.


Does the Foxtel unit operate a cable box or convertor separately? You remote should be setup (Foxtel) to turn both units off at the same time. It sounds like the Foxtel unit is losing all of it's power when it should have constant power for standby.

Oct 30, 2013 | Sony Televison & Video

1 Answer

Our Hitachi 1080 Alis is zoomed in when watching Foxtel but is okay on TV and RGB. Can you please tell me how to fix? Thanks, Giselle


in not sure what foxtel is but if it is some sort cable provider some have there own picture size settings. it may be accessible through the picture settings on the cablebox if not you will have to ask the provider to help you go through the service mode to change the picture size. just knowing all other inputs are showing okay would lead me to suspect whatever plugged into the source. one more thing to verify is to plug in a dvd player or game console and see if that is zoomed in. if its not then your "foxtel" is to blame.

Apr 08, 2011 | Hitachi Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...