Question about Connex Radio Communications

Open Question

How to install frequency module for connex 4400 turbo

Posted by on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

abtchevy

  • 2 Answers

SOURCE: Frequencies

i have a 4600 connex and if i turn the mic gain all the way up i get alot of modulation.can someone tell me how to fix that?

Posted on Sep 05, 2010

Ad
Ironfist109

Iron

  • 3018 Answers

SOURCE: can i get a connex turbo 4400 users manual

  • Yes you can. This is actually a service manual but it covers the basics found in the users manual in the first part of the first link. Also with a service manual you can dissect the radio to perform repairs.


  • Part 2 -
http://www.cbtricks.com/radios/connex/cx_4400_cx4400hp/graphics/connex_cx4400_cx4400hp_sm_pg16_pg33.pdf
Regards, Tony

Posted on Apr 30, 2011

bduxbury

Brett Duxbury

  • 4290 Answers

SOURCE: I just install a connex 4600 turbo radio what causes a lot engine inference in back ground

lack of a noise filter on the DC voltage supply to the radio
http://www.jaycar.com.au/Sight-%26-Sound-Car/Car-Audio-Hardware/Car-Hardware-Accessories/10A-DC-Noise-Filter-(Improved)/p/AA3074

or
lack of grounding maybe
https://www.youtube.com/watch?v=dY3gD-j4SVs

Posted on Mar 15, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Converting connex 4400 turbo to a cb


If you disable any part of the radio that does not pertain to CB then you could actually do damage to the radio. the best thing to do is leave it on the CB band and don't touch it.

Mar 05, 2017 | Connex Radio Communications

1 Answer

How do I convert my connex 4400 turbo from 10 meter to regular cb channel. I have the module to do so, but not sure what to do with it.


Your connex should have a know with letters on it A,B,C,D,E,F, Look at the counter and set that knob to C whick should be the CB frequency.

Feb 09, 2016 | Connex Radio Communications

1 Answer

Wanting info on my connex 4400 turbo how to peak and tune


unless you have the equipment to do this.. please take to a radio store. have them do it.. its free. or they shouldn't charge to do that service.. unless it needs a major factory alignment.
also they shouldn't take out or clip anything in the process if they do find you another place LOL..

Dec 24, 2012 | Connex 4400 320-Channels Base CB Radio

1 Answer

There is no power to the cb


I hope by now you have sent it back to be repaired or found out what the problem is.

Sep 04, 2012 | Connex 4400 Turbo High Power 10 Meter...

1 Answer

Can i get a connex turbo 4400 users manual


  • Yes you can. This is actually a service manual but it covers the basics found in the users manual in the first part of the first link. Also with a service manual you can dissect the radio to perform repairs.


  • Part 2 -
http://www.cbtricks.com/radios/connex/cx_4400_cx4400hp/graphics/connex_cx4400_cx4400hp_sm_pg16_pg33.pdf
Regards, Tony

Apr 30, 2011 | Connex 4400 320-Channels Base CB Radio

1 Answer

How do i find the FM frequency for a Connex CX-4300-300 CB radio?


FM is just a form of modulation, not an actual frequency. The frequency doesn't change between any of the modes (LSB, USB, AM, FM, CW).

For example, if you are on channel 19 (27.185MHz) on AM (Amplitude Modulation,) switching to FM (Frequency Modulation) mode you would still be at 27.185MHz, but using a different form of modulation.

Nov 10, 2009 | Connex CX-4300HP CB Radio

1 Answer

I need diagram connex cx 4400 power out put.


1-SHIELD
2-AUDIO
3-TX
4-RX
YELLOW-N/C
MAYBE THIS WILL HELP

Sep 26, 2009 | Connex 4400 320-Channels Base CB Radio

1 Answer

Can anyone explain the band knob and the pa/fm/am knob for my connex 4400 hp???


p.a. stands for public address,you need a pa horn for this. F.m. is for frequency modulation alot of ten meter radios offer this now it's mostly line of site communication if you have somebody else with fm though it sounds alot better. A.m. is amplitude modulation it's the standard way cb's have communicated since the beginning.I hope this helps.Good luck. Dan

Jul 25, 2009 | Connex Radio Communications

5 Answers

Frequencies


i have a 4600 connex and if i turn the mic gain all the way up i get alot of modulation.can someone tell me how to fix that?

Feb 01, 2008 | Connex 4600 Base CB Radio

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Connex Radio Communications Experts

Chris

Level 2 Expert

197 Answers

Damon Nesselrodt
Damon Nesselrodt

Level 2 Expert

197 Answers

Ray Murphy

Level 2 Expert

68 Answers

Are you a Connex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...